Antisymmetric exchange interaction,magnetoelectric and magnetodielectric response in structurally distorted G-type antiferromagnetic perovskite: La0.9Gd0.1FeO3

Detailed structural analysis of the X-Ray diffraction pattern of La_0.9Gd_0.1FeO₃ (LGFO) synthesized via the solid state reaction reveals distorted perovskite structure. Magnetization studies show a characteristic of weak ferromagnetism which is believed to be induced by canted anti-ferromagnetically coupled spins. When explored in a wide temperature and frequency range, AC electrical properties reveal interesting relaxation mechanisms. LGFO exhibits relatively high dielectric permittivity (ε′~4×10³) close to room temperature. Temperature dependent magneto-dielectric response appears (magnetodielectric ~−5.5%) even at low magnetic field ~5 kOe. Attractive electrical, magnetic and magnetoelectric properties of the present LGFO at relatively higher temperature makes it a very promising material for application in devices.     

Operation of low driving voltage cascaded modulator over non-cascaded modulator for 4 dB extinction ratio at 100 giga bit per second (Gbps)

This paper describes improved results when comparing cascaded traveling wave electro absorption modulator (TWEAM) to non-cascaded TWEAM by simulation. Large signal modeling is used for both types of modulators to achieve 4 and 10 dB extinction ratios (ERs) with flat frequency response for applications in short distance as well as long distance optical fiber communication. To obtain 4 and 10 dB ERs with 110 GHz 3 dB bandwidth, a cascaded TWEAM requires 0.4 V peak to peak (V_P-P) and 1 V_P-P input driving voltages respectively. A non-cascaded TWEAM requires about two times the input driving voltage compared to the cascaded modulator to achieve the same values of ER and 3 dB bandwidth. Both modulators have been simulated with the same bias and also use the same circuit parameters except for the total active segment lengths (1 and 0.5 mm for cascaded and non-cascaded modulator respectively) and microstrip lengths to obtain the same ERs and 3 dB bandwidths.     

Polarization-insensitive nonlinear optical loop mirror demultiplexer with twisted fiber

We experimentally demonstrate reduction of the polarization sensitivity of a nonlinear optical loop mirror (NOLM) from 5 to 0.5 dB by use of 550 m of twisted dispersion-shifted fiber with a twist rate of 8 turns/m (24 turns/beat length). The twisting of the fiber induces circular birefringence and equates the parallel-and the orthogonal-polarization nonlinear phase-shift terms. Experimental results show that the polarization sensitivity monotonically decreases from 5 dB for nontwisted fiber to 0.5 dB for fiber that is twisted at a rate of 8 turns/m, and the twist rate should be more than 4 turns/m (>10 turns/beat length) for emulation of circularly polarized fiber. The minimum polarization sensitivity occurs when the control-pulse polarization is aligned with one of the eigenmodes of the twisted fiber. With the fiber twisted at a rate of 8 turns/m in the NOLM, the nonlinear transmission is 23% at a switching energy of 4 pJ/pulse. Simulations confirm the observed behavior and show that the remaining polarization sensitivity results from energy transfer between orthogonal modes of the signal pulse.     

High Performance (fT~500GHZ) In0.52Al0.48As/In0.53Ga0.47As/InP Quantum Wire MODFETs Employing Asymmetric Coupled-Well Channels

A coupled-well InAlAs/InGaAs quantum wire MODFET structure is proposed, for which simulations predict improved frequency performance (>500 GHz), over a wider range of V_g, as compared to well/wire devices with a standard MODFET heterointerface. A comparison of several transverse potential well profiles, obtained by varying the placement of a thin barrier within a 100 Å finite well, is presented. In all cases, the quantum wires consist of a 0.1 m long channel and a 150 Å finite-square-well lateral profile. It has been found that the peak of the electron distribution for the first confined state, as measured from the heterointerface, changes dramatically depending on the location of the thin barrier. For quantum wire structures, realized in the lattice matched system of In_0.52Al_0.48As/In_0.53Ga_0.47As/InP, a change in the barrier location of 25 Å is accompanied by a shift in the carrier peak of more than 40 Å (~20 Å closer to or farther from the spacer-well interface than in the standard MODFET profile). Implications of this are reflected in the current-voltage characteristics (I_d-V_d) and frequency responses (f_T-V_g) of the proposed structures.     

A Novel Implementation Technique of Conical Scan Radar Using A Programmable Phased Array

In radar, planar phased array antenna plays vital role in electronic scanning in the azimuth and elevation direction to the horizon. In most operations using planar phased array both the coordinates of azimuth and elevation, are steered electronically. In this paper a conceptual schematic of a phased array antenna with programmable time delay units has been presented. It is shown that by suitably exploiting the time delay matrix one can have electronic beam rotation around the target axis as required in conical scan. Thus both the elevation and azimuth motors in conical scan system are replaced by electronic scanning. Heuristically, we have selected eight consecutive points for beam rotation in a polygon shape and can also be extended almost circular shape by increasing number of array elements and phase shifter (delays) in the delay matrix. The array requires dual control of phase gradient and individual phase values. The whole array is controlled by micro-controller. This presents exciting possibilities in radar operation.     

Generation of vortices by a streamwise oscillating cylinder

The wake of a streamwise oscillating cylinder is presently investigated. The Reynolds number investigated is 300, based on the cylinder diameterd. The cylinder oscillates at an amplitude of 0.5d and a frequencyf _e/f_s=1.8, wheref _e is the cylinder oscillating frequency andf _s is the natural vortex shedding frequency of a stationary cylinder. Under these conditions the flow is essentially two dimensional. A two-dimensional direct numerical simulation (DNS) scheme has been developed to calculate the flow. The DNS results display a street of binary vortices, each containing two counter-rotating vortical structures, symmetrical about the centerline, which is in excellent agreement with measurements. The drag and lift on the cylinder have been examined. The time averaged drag and lift are 1.4 and 0, respectively, which are the same as those on a stationary cylinder at the sameRe. However, the fluctuating drag was high, about 2.68. It has been found that, being symmetrically formed about the centerline, the binary vortices induce an essentially zero fluctuating lift, which may have a profound implication in flow control and engineering.     

The optical-mechanical analogy in general relativity: Exact Newtonian forms for the equations of motion of particles and photons

In many metrics of physical interest, the gravitational field can be represented as an optical medium with an effective index of refraction. We show that, in such a metric, the orbits of both massive and massless particles are governed by a variational principle which involves the index of refraction and which assumes the form of Fermat's principle or of Maupertuis's principle. From this variational principle we derive exact equations of motion of Newtonian form which govern both massless and massive particles. These equations of motion are applied to some problems of physical interest.     

On Galerkin models for transport in groundwater

The Galerkin finite element model (GFEM) may provide oscillatory results when employed to predict contaminant transport in groundwater unless a very fine mesh is used. Adaptation of a very fine mesh may make the application of the GFEM impractical to field problems. The Petrov—Galerkin finite element models (PGFEMs) can provide oscillation free results for relatively coarser mesh. However, the PGFEM violates the Galerkin principle and introduces large “numerical” dispersion. The objective of this paper has been to develop accurate criteria to improve the applicability of the GFEM to obtain oscillation free accurate results for coarser mesh and compare its performance with that of the PGFEM. It has been shown that the GFEM provides oscillation free accurate results for coarser mesh with Peclet number Pe 20. Further, the GFEM prediction has always been more accurate than the PGFEM for a variety of source configurations and flow fields.     

Efficient way for detection of alcohols using hollow core photonic crystal fiber sensor

Optical Review - In this study, a simple hollow core hexagonal structured photonic crystal fiber is offered and analyzed to discern commonly used different type of alcohols in our daily life. The...     

Multilevel Deep Feature Generation Framework for Automated Detection of Retinal Abnormalities Using OCT Images

Optical coherence tomography (OCT) images coupled with many learning techniques have been developed to diagnose retinal disorders. This work aims to develop a novel framework for extracting deep features from 18 pre-trained convolutional neural networks (CNN) and to attain high performance using OCT images. In this work, we have developed a new framework for automated detection of retinal disorders using transfer learning. This model consists of three phases: deep fused and multilevel feature extraction, using 18 pre-trained networks and tent maximal pooling, feature selection with ReliefF, and classification using the optimized classifier. The novelty of this proposed framework is the feature generation using widely used CNNs and to select the most suitable features for classification. The extracted features using our proposed intelligent feature extractor are fed to iterative ReliefF (IRF) to automatically select the best feature vector. The quadratic support vector machine (QSVM) is utilized as a classifier in this work. We have developed our model using two public OCT image datasets, and they are named database 1 (DB1) and database 2 (DB2). The proposed framework can attain 97.40% and 100% classification accuracies using the two OCT datasets, DB1 and DB2, respectively. These results illustrate the success of our model.