Selective cytotoxicity of organotin(IV) compounds with 2,3-dihydroxybenzyldithiocarbazate Schiff bases

Research on Chemical Intermediates - A series of tridentate ONS Schiff bases were synthesised via condensation by reacting 2,3-dihydroxybenzaldehyde with S-2-methylbenzyldithiocarbazate (S2MBDTC)...     

Real‐Time NMR Spectroscopy for Studying Metabolism

Current metabolomics approaches utilize cellular metabolite extracts, are destructive, and require high cell numbers. We introduce here an approach that enables the monitoring of cellular metabolism at lower cell numbers by observing the consumption/production of different metabolites over several kinetic data points of up to 48 hours. Our approach does not influence cellular viability, as we optimized the cellular matrix in comparison to other materials used in a variety of in‐cell NMR spectroscopy experiments. We are able to monitor real‐time metabolism of primary patient cells, which are extremely sensitive to external stress. Measurements are set up in an interleaved manner with short acquisition times (approximately 7 minutes per sample), which allows the monitoring of up to 15 patient samples simultaneously. Further, we implemented our approach for performing tracer‐based assays. Our approach will be important not only in the metabolomics fields, but also in individualized diagnostics.     

Fabrication and characterization of a novel wound scaffold based on polyurethane added with Channa striatus for wound dressing applications

Abstract

Wound healing is a complex process and it involves restoration of damaged skin tissues. Several wound dressings comprising naturally made substances are constantly investigated to assist wound healing. In this research, a new wound dressing based on polyurethane (PU) supplemented with essence of Channa striatus (CS) fish oil was made by electrospinning. Morphological study depicted the reduction in fiber diameter than PU with the addition of fish oil (0.552?±?0.109?μm for 8:1 v/v% and 0.519?±?0.196?μm 7:2 v/v%) than the pristine PU (0.971?±?0.205?µm). Fourier transform infrared spectroscopy (FTIR) analysis revealed the presence of fish oil in the composite as identified through increasing peak intensity. Fish oil resulted in the hydrophilic behavior (88?±?3 (8:1 v/v) and 70?±?6 (7:2 v/v)) as revealed in the contact angle analysis. Thermal gravimetric analysis (TGA) showed the superior thermal behavior of the wound dressing patch compared to the PU. Atomic force microscopy (AFM) analysis insinuated a decrease in the surface roughness of the pristine polyurethane with the added fish oil. Coagulation assays signified the delay in the blood clotting time portraying its anti-thrombogenic behavior. Hemolytic assay revealed the less toxic nature of the developed nanocomposites with the red blood cells (RBC’s) depicting its safety with blood. Hence, polyurethane nanofibers supplemented with fish oil made them as deserving candidates for wound dressing application.     

Betacyanins and Betaxanthins in Cultivated Varieties of Beta vulgaris L. Compared to Weed Beets

There are 11 different varieties of Beta vulgaris L. that are used in the food industry, including sugar beets, beetroots, Swiss chard, and fodder beets. The typical red coloration of their tissues is caused by the indole-derived glycosides known as betalains that were analyzed in hypocotyl extracts by UV/Vis spectrophotometry to determine the content of betacyanins (betanin) and of betaxanthins (vulgaxanthin I) as constituents of the total betalain content. Fields of beet crops use to be also infested by wild beets, hybrids related to B. vulgaris subsp. maritima or B. macrocarpa Guss., which significantly decrease the quality and quantity of sugar beet yield; additionally, these plants produce betalains at an early stage. All tested B. vulgaris varieties could be distinguished from weed beets according to betacyanins, betaxanthins or total betalain content. The highest values of betacyanins were found in beetroots ‘Monorubra’ (9.69 mg/100 mL) and ‘Libero’ (8.42 mg/100 mL). Other beet varieties contained less betacyanins: Sugar beet ‘Labonita’ 0.11 mg/100 mL; Swiss chard ‘Lucullus,’ 0.09 mg/100 mL; fodder beet ‘Monro’ 0.15 mg/100 mL. In contrast with weed beets and beetroots, these varieties have a ratio of betacyanins to betaxanthins under 1.0, but the betaxanthin content was higher in beetcrops than in wild beet and can be used as an alternative to non-red varieties. Stability tests of selected varieties showed that storage at 22 °C for 6 h, or at 7 °C for 24 h, did not significantly reduce the betalain content in the samples.     

Fluid Flow Analysis of Integrated Porous Bone Scaffold and Cancellous Bone at Different Skeletal Sites: In Silico Study

The dynamic characteristic of bone is its ability to remodel itself through mechanobiological responses. Bone regeneration is triggered by mechanical cues from physiological activities that generate structural strain and cause bone marrow movement. This phenomenon is crucial for bone scaffold when implanted in the cancellous bone as host tissue. Often, the fluid movement of bone scaffold and cancellous bone is studied separately, which does not represent the actual environment once implanted. In the present study, the fluid flow analysis properties of bone scaffold integrated into the cancellous bone at different skeletal sites are investigated. Three types of porous bone scaffolds categorized based on pore size configurations: 1 mm, 0.8 mm and hybrid (0.8 mm interlaced with 0.5 mm) were used. Three different skeletal sites of femoral bone were selected: neck, lateral condyle and medial condyle. Computational fluid dynamics was utilized to analyze the fluid flow properties of bone scaffold integrated cancellous bone. The results of this study reveal that the localization and maximum value of shear stress in an independent bone scaffold are significantly different compared to the bone scaffold integrated with cancellous bone by about 160% to 448% percentage difference. Low shear stress and high permeability were found across models that have higher Tb.Sp (trabecular separation). Specimen C and femoral lateral condyle showed the highest permeability in their respective category.

     

The Multifunctional Role of Herbal Products in the Management of Diabetes and Obesity: A Comprehensive Review

Obesity and diabetes are the most demanding health problems today, and their prevalence, as well as comorbidities, is on the rise all over the world. As time goes on, both are becoming big issues that have a big impact on people’s lives. Diabetes is a metabolic and endocrine illness set apart by hyperglycemia and glucose narrow-mindedness because of insulin opposition. Heftiness is a typical, complex, and developing overall wellbeing worry that has for quite some time been connected to significant medical issues in individuals, all things considered. Because of the wide variety and low adverse effects, herbal products are an important hotspot for drug development. Synthetic compounds are not structurally diverse and lack drug-likeness properties. Thus, it is basic to keep on exploring herbal products as possible wellsprings of novel drugs. We conducted this review of the literature by searching Scopus, Science Direct, Elsevier, PubMed, and Web of Science databases. From 1990 until October 2021, research reports, review articles, and original research articles in English are presented. It provides top to bottom data and an examination of plant-inferred compounds that might be utilized against heftiness or potentially hostile to diabetes treatments. Our expanded comprehension of the systems of activity of phytogenic compounds, as an extra examination, could prompt the advancement of remedial methodologies for metabolic diseases. In clinical trials, a huge number of these food kinds or restorative plants, as well as their bioactive compounds, have been shown to be beneficial in the treatment of obesity.     

Australian Honeypot Ant (Camponotus inflatus) Honey—A Comprehensive Analysis of the Physiochemical Characteristics,Bioactivity, and HPTLC Profile of a Traditional Indigenous Australian Food

Despite its cultural and nutritional importance for local Aboriginal people, the unusual insect honey produced by Western Australian honeypot ant (Camponotus inflatus) has to date been rarely investigated. This study reports on the honey’s physicochemical properties, its total phenolic, major sugars and 5-hydroxymethylfurfural contents, and its antioxidant activities. The honey’s color value is 467.63 mAU/63.39 mm Pfund, it has a pH of 3.85, and its electric conductivity is 449.71 µSiemens/cm. Its Brix value is 67.00, corresponding to a 33% moisture content. The total phenolics content is 19.62 mg gallic acid equivalent/100 g honey. Its antioxidant activity measured using the DPPH* (2,2-diphenyl-1-picrylhydrazyl) and FRAP (ferric reducing–antioxidant power) assays is 1367.67 µmol Trolox/kg and 3.52 mmol Fe⁺²/kg honey, respectively. Major sugars in the honey are glucose and fructose, with a fructose-to-glucose ratio of 0.85. Additionally, unidentified sugar was found in minor quantities.     

The Utilization of Algae and Seaweed Biomass for Bioremediation of Heavy Metal-Contaminated Wastewater

The presence of heavy metals in water bodies is linked to the increasing number of industries and populations. This has serious consequences for the quality of human health and the environment. In accordance with this issue, water and wastewater treatment technologies including ion exchange, chemical extraction, and hydrolysis should be conducted as a first water purification stage. However, the sequestration of these toxic substances tends to be expensive, especially for large scale treatment methods that require tedious control and have limited efficiency. Therefore, adsorption methods using adsorbents derived from biomass represent a promising alternative due to their great efficiency and abundance. Algal and seaweed biomass has appeared as a sustainable solution for environmentally friendly adsorbent production. This review further discusses recent developments in the use of algal and seaweed biomass as potential sorbent for heavy metal bioremediation. In addition, relevant aspects like metal toxicity, adsorption mechanism, and parameters affecting the completion of adsorption process are also highlighted. Overall, the critical conclusion drawn is that algae and seaweed biomass can be used to sustainably eliminate heavy metals from wastewater.     

Development of Sustained Release Baricitinib Loaded Lipid-Polymer Hybrid Nanoparticles with Improved Oral Bioavailability

Baricitinib (BTB) is an orally administered Janus kinase inhibitor, therapeutically used for the treatment of rheumatoid arthritis. Recently it has also been approved for the treatment of COVID-19 infection. In this study, four different BTB-loaded lipids (stearin)-polymer (Poly(d,l-lactide-co-glycolide)) hybrid nanoparticles (B-PLN1 to B-PLN4) were prepared by the single-step nanoprecipitation method. Next, they were characterised in terms of physicochemical properties such as particle size, zeta potential (ζP), polydispersity index (PDI), entrapment efficiency (EE) and drug loading (DL). Based on preliminary evaluation, the B-PLN4 was regarded as the optimised formulation with particle size (272 ± 7.6 nm), PDI (0.225), ζP (−36.5 ± 3.1 mV), %EE (71.6 ± 1.5%) and %DL (2.87 ± 0.42%). This formulation (B-PLN4) was further assessed concerning morphology, in vitro release, and in vivo pharmacokinetic studies in rats. The in vitro release profile exhibited a sustained release pattern well-fitted by the Korsmeyer–Peppas kinetic model (R² = 0.879). The in vivo pharmacokinetic data showed an enhancement (2.92 times more) in bioavailability in comparison to the normal suspension of pure BTB. These data concluded that the formulated lipid-polymer hybrid nanoparticles could be a promising drug delivery option to enhance the bioavailability of BTB. Overall, this study provides a scientific basis for future studies on the entrapment efficiency of lipid-polymer hybrid systems as promising carriers for overcoming pharmacokinetic limitations.