De novo enantioselective syntheses of galacto-sugars and deoxy sugars via the iterative dihydroxylation of dienoate

An efficient route to various sugar lactones has been developed. Key to the overall transformation is the sequential osmium-catalyzed dihydroxylation of 2,4-dienoates. The simplest (one-step/racemic) example of this reaction occurs when the dihydroxylation is performed with aqueous NMO in MeOH. When the first dihydroxylation is performed using the AD-mix procedure, an enantioselective variant results. When a matched AD-mix procedure is used for the second dihydroxylation, an exceedingly diastereo- and enantioselective synthesis of galacto-1,4-lactone results. [Reaction: see text]     

Evaluation of some as-triazines and re-evaluation of PDT and ferrozine as reagents for spectrophotometric determination of ruthenium

A sensitive method for the spectrophotometric determination of ruthenium with the ferroinyielding as-triazines has been developed. This method has several advantages; complete reduction of ruthenium species to ruthenium(II) can be achieved by the recommended procedure, which shortens the colour development time, saves the unnecessary use of several-fold excess of the reagent and the molar absorptivity is increased significantly. A few of the new as-triazines together with the commercially available Ferene(R) have been evaluated as ruthenium(II) chromogens. 3-(2-Pyridyl)-5,6-diphenyl-as-triazine (PDT) and ferrozine, a sulphonated derivative of PDT, have been re-evaluated by the new method. It has been observed that the as-triazine acting as a bidentate ligand forms a tris-complex with ruthenium(II) similar to its reaction with iron(II).     

Xanthine Sensors Based on Anodic and Cathodic Detection of Enzymatically Generated Hydrogen Peroxide

A xanthine biosensor was fabricated by the covalent immobilization of xanthine oxidase (XO) onto a functionalized conducting polymer (Poly‐5, 2′: 5′, 2″‐terthiophine‐3‐carboxylic acid), poly‐TTCA through the formation of amide bond between carboxylic acid groups of poly‐TTCA and amine groups of enzyme. The immobilization of XO onto the conducting polymer (XO/poly‐TTCA) was characterized using cyclic voltammetry, quartz crystal microbalance (QCM), and X‐ray photoelectron spectroscopy (XPS) techniques. The direct electron transfer of the immobilized XO at poly‐TTCA was found to be quasireversible and the electron transfer rate constant was determined to be 0.73 s^?1. The biosensor efficiently detected xanthine through oxidation at +0.35 V and reduction at ?0.25 V (versus Ag/AgCl) of enzymatically generated hydrogen peroxide. Various experimental parameters, such as pH, temperature, and applied potential were optimized. The linear dynamic ranges of anodic and cathodic detections of xanthine were between 5.0×10^?6?1.0×10^?4 M and 5.0×10^?7 to 1.0×10^?4 M, respectively. The detection limits were determined to be of 1.0×10^?6 M and 9.0×10^?8 M with anodic and cathodic processes, respectively. The applicability of the biosensor was tested by detecting xanthine in blood serum and urine real samples.     

The level structure of104Rh deduced from the103Rh(n, γ)104Rh reaction

A sensitive, high resolution study of the¹⁰³Rh(n, γ)¹⁰⁴Rh reaction has revealed the presence of 516 transitions in the energy range 3,700 to 7,000 keV. These results have been used to interpret the reaction in terms of a statistical model in which a constant temperature level density is assumed. Previous work which revealed a much simpler level structure is quantitatively explained in terms of resolution and sensitivity. The average reduced radiative width is significantly lower than that reported for nuclides in theA=100 mass region and the width shows an indication of an energy dependence somewhat greater thanE _γ ³ . The neutron separation energy of the reaction is found to be 6,999.0±0.1 keV.     

CSE-MECC two-dimensional capillary electrophoresis analysis of proteins in the mouse tumor cell (AtT-20) homogenate

Two-dimensional capillary electrophoresis was used for the separation of proteins and biogenic amines from the mouse AtT-20 cell line. The first-dimension capillary contained a TRIS–CHES–SDS–dextran buffer to perform capillary sieving electrophoresis, which is based on molecular weight of proteins. The second-dimension capillary contained a TRIS–CHES–SDS buffer for micellar electrokinetic capillary chromatography. After a 61-s preliminary separation, fractions from the first-dimension capillary were successively transferred to the second-dimension capillary, where they further separated by MECC. The two-dimensional separation required 60 min.     

Synthesis, structures and reactivity of triosmium clusters containing terminal pyrazines, bridging hydroxy and methoxycarbonyl ligands

Four triosmium carbonyl clusters bearing terminal pyrazines, bridging hydroxy and methoxycarbonyl ligands of general formula [Os₃(CO)₉(μ-OH)(μ-OMeCO)L] (1, L = pyrazine; 2, L = 2-methylpyrazine; 3, L = 2,3-dimethylpyrazine; 4, L = 2,3,5-trimethylpyrazine) were synthesized by the reactions of [Os₃(CO)₁₂] with the corresponding pyrazine derivatives and water in the presence of a methanolic solution of Me₃NO in moderate yields. Compounds [Os₃(CO)₉(μ-OH)(μ-OMeCO)L] react with a series of two electron donor ligands, L′ at ambient temperature to give [Os₃(CO)₉(μ-OH)(μ-OMeCO)L′] (5, L′ = PPh₃; 6, L′ = P(OMe)₃; 7, L′ = ^tBuNC; 8, L′ = C₅H₅N) in good yields by the displacement of the pyrazine ligands. This implies that the pyrazine ligands in 1–4 are relatively labile. Compounds 2, 3, 4, and 8 were characterized by single crystal X-ray diffraction analyses. All the four compounds possess two metal–metal bonds and a non-bonded separation of two osmium atoms defined by Os(1)Os(3), which are simultaneously bridged by OH and MeOCO ligands and a heterocyclic ligand is terminally coordinated to one of the two non-bonded osmium atoms.     

Dependence of phase behavior of some non-ionic surfactants at the air-water interface on micellization in the bulk

The temperature-dependent surface phase behavior of two sparingly soluble surfactants, namely, ethylene glycol n-dodecyl ether (EGDE) and ethylene glycol n-tetradecyl ether (EGTE), at the air-water interface was investigated by film balance and Brewster angle microscopy (BAM). A cusp point followed by a pronounced plateau region in the surface pressure-time (pi-t) adsorption isotherms of the amphiphiles measured by film balance indicates the first-order phase transition. Bright two-dimensional condensed phase domains in a dark background are observed by BAM just after the phase transition. In both cases the critical surface pressure necessary for the phase transition increases with increasing temperature. The domains are found to be circular up to 5 and 27 degrees C for EGDE and EGTE, respectively, above which they show a fingering pattern. Condensed domains are observed up to 23 and 37 degrees C for EGDE and EGTE, respectively. The surface properties of the amphiphiles are found to be markedly affected by their tendency to aggregate in the bulk as micelles. The CMC values of both the amphiphiles show a maximum at a definite temperature, T(max), that corresponds well to their respective maximum temperatures of domain formation. An increase in temperature beyond T(max) results in an increasing trend for the formation of micelles. Consequently the system suffers from a shortage of two-dimensional surface concentration of the molecules to attain the surface pressure necessary for phase transition. With increasing temperature, the enthalpy, DeltaH(m) degrees , and entropy, DeltaS(m) degrees , of micellization change from negative to positive in both cases. An enthalpy-entropy compensation effect is found to hold for both the amphiphiles over the entire temperature range. The thermodynamic quantities reveal that the increase in temperature is favorable for micellization when the temperature exceeds the corresponding T(max) of the amphiphiles.     

Hydration of short-chain poly(oxyethylene) in carbon tetrachloride: an infrared spectroscopic study

Hydration of short-chain poly(oxyethylene)s, CH(3)(OCH(2)CH(2))(m)OCH(3) (abbreviated as C(1)E(m)()C(1)) (m = 1-3), in carbon tetrachloride has been studied by infrared spectroscopy. The O-H stretching vibrations of water in ternary solutions with H(2)O:C(1)E(m)C(1):CCl(4) mole ratios of 0.000418:0.005:0.995 to 0.000403:0.04:0.96 were analyzed. Two types of hydrogen bonds are formed in the interaction between water and C(1)E(m)C(1) in carbon tetrachloride; one is a monodentate hydrogen bond, in which only one of the O-H bonds of a water molecule participates in hydrogen bonding, and the other is a bidentate hydrogen bond, in which both of the O-H bonds of a water molecule participate in hydrogen bonding by bridging oxygen atoms separated by two or more monomer units on the polymer chain. An important finding is that the bidentate hydrogen-bond bridge is not formed between the nearest-neighbor oxygen atoms. This experimental observation supports the results of previous molecular dynamics simulations. The shortest oligomer of poly(oxyethylene), i.e., CH(3)OCH(2)CH(2)OCH(3) (1,2-dimethoxyethane) with a single monomer unit, is suggested not to be an adequate model for this polymer with respect to hydrogen bonding to water. The hydrogen bonding in a 1:1 C(1)E(m)C(1)-water adduct in carbon tetrachloride represents primitive incipient hydration of poly(oxyethylene). The present results indicate that both monodentate and bidentate hydrogen bonds are important and the latter is destabilized more rapidly than the former with increasing temperature. This dehydration process can be a potential mechanism of the poly(oxyethylene)-water phase separation.     

Faceted structures in Langmuir monolayers of diethylene glycol mono-n-octadecyl ether at the air--water interface

We have concurrently studied the surface pressure (pi) versus area (A) isotherms and microscopic surface morphological features of Langmuir monolayers of diethylene glycol mono-n-octadecyl ether (C18E2) by film balance and Brewster angle microscopy (BAM) over a wide range of temperature. At temperatures < or =10 degrees C, the monolayers exist in the form of condensed phase even just after the evaporation of the spreading solvent, suggesting that the melting point of the condensed phase is above this temperature. At > or =15 degrees C, the monolayers can exist as gas (G), liquid expanded (LE), and liquid condensed (LC) phases and undergo a pressure-induced first-order phase transition between LE and LC phases showing a sharp cusp point followed by a plateau region in the pi-A isotherms. A variety of 2-D structures, depending on the subphase temperature, are observed by BAM just after the appearance of the cusp point. It is interesting to note here that the domains attain increasingly large and compact shape as the subphase temperature increases and finally give faceted structures with sharp edges and corners at > or =30 degrees C. The BAM observations were coupled with polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) to gain better understanding regarding the conformational order and subcell packing of the molecules. The constancy of the methylene stretching modes over the studied temperature range suggests that the hydrocarbon chains do not undergo any conformational changes upon compression of the monolayer. However, the full width at half-maximum (fwhm) values of the asymmetric methylene stretching mode (nu(as)(CH(2))) are found to respond differently with changes in temperature. It is concluded that even though the trans/gauche ratio of the hydrocarbon chains remains virtually constant, the LE-LC phase transition upon compression of the monolayer is accompanied by a loss of the rotational freedom of the molecules.     

A new access to polyhydroxy piperidines of the azasugar class: synthesis and glycosidase inhibition studies

A new synthetic strategy has been devised to access a variety of polyhydroxylated piperidines belonging to the azasugar class of glycosidase inhibitors. The key precursor (3aR, 7aR)-5-benzyl-2,2-dimethyl-7-methylenehexahydro[1,3]dioxo[4,5-c]pyridine is obtained by photoinduced electron transfer (PET) cyclization of the corresponding alpha-trimethylsilylmethylamine radical cation to the tethered acetylene functionality. The new molecules have been evaluated for inhibitory properties for certain beta-glycosidases and have been found to be moderate to weak inhibitors of the enzymes under study.