Laser Light and X-Ray Diffraction Studies of Oriented Isotactic Polypropylene (iPP) Prepared by Temperature Slope Crystallization

Isotactic polypropylene (iPP) film was melt-crystallized in a temperature gradient. The iPP film showed well oriented α- and β-crystalline textures along the gradient. The crystalline structure, phase transition boundary and lamellar twisting were examined by X-ray diffraction and laser light diffraction (LLD). On the α-β boundary, LLD shows a sharp streak perpendicular to the boundary, where the a-axis of the β-crystal is oriented perpendicular to the temperature gradient. Apart from the boundary, the a-axis of the β-crystal becomes parallel to the gradient. The β-crystal shows lamellar twisting with a pitch of 200 μm at room temperature. When heated the β-crystal, the lamellar distance of 295Å at room temperature decreases to 285Å at 80–100°C and then increases to more than 300Å above 120°C. During the heating, the value of the twist period increases from 200 to 210 μm at 90–100°C, and then to above 224 μm at 140°C. The increase of the twist period is related to the increasing crystalline thickness of the β-lamellae.     

Influence of the pumping scheme in double-pass discrete Raman-fiber amplifiers

We demonstrate the effect of the pumping scheme in a double-pass discrete Raman-fiber amplifier. The copumping scheme outperforms the counterpumping scheme for small and medium signal power ranges. The performance discrepancy of about 0.3 dB is measured. However, the counterpumping scheme performs better than that of the copumping scheme for large signal powers. These effects are influenced by the pump distribution along the fiber-amplifying medium. The pump-depletion effect is found to be the main cause of the performance discrepancy between these two pumping schemes. These findings can be utilized as the guidelines in designing double-pass discrete Raman-fiber amplifiers.     

Intra‐strain Variability in the Effects of Temperature on UV‐B Sensitivity of Cyanobacteria

Stratospheric ozone depletion is mostly marked over the Antarctic and to a lesser extent over the Arctic, though recent reports have revealed that this also occurs at lower latitudes. Continued depletion of ozone in the lower stratosphere allows more UVR to reach the Earth's surface. Furthermore, it is projected that surface water temperatures will increase by between 0.2 and 2.0°C by the year 2060 and this will directly or indirectly influence algal growth. The interactions between environmental factors are complicated by the existence of different strains (ecotypes) of the same species that may respond differently. To understand the interactive effects of temperature and UV‐B on two strains of Anabaena circinalis, we investigated the damaging effects of UV‐B on cell numbers and photosynthetic characteristics and also examined the effect of temperature on the capacity of cells to recover from such stress. Both strains of A. circinalis responded differently in terms of survival, photosynthetic characteristics and recovery with interactions between temperature and UV‐B. This could be due to the variations in strain‐specific photoreactive mechanisms. This needs to be explored further including more strains and species before definitive conclusions can be reached about effects of global change on cyanobacteria generally.     

Thermal Effect on Positive Patterned Self-Assembled Monolayer Grown from a Droplet of Alkanethiol

Atomic force microscope technique is widely used for the spatial narrow deposition of molecules inside the bare space of preexisting self-assembled monolayer (SAM) matrix. Using molecular dynamics simulation, we studied the formation of positively patterned SAM from a globule of 1-octadecanethiol (ODT) on predesigned SAM matrix of 1-dodecanethiol (DDT) and effect of temperature on it. The alkyl chains of ODT SAM were densely packed and ordered by means of chemisorption through sulfur atoms. The circular SAM of ODT contained defects due to the molecules those were standing upside down or trapped inside ODT SAM. We found that with the increase of temperature, these defects moved out by flipping of inverted ODT molecules or building spaces to be adsorbed on Au surface. The ODT molecules on the top of the pile of stable circular SAM or those are upside down and trapped disperse in a unique fashion namely serial pushing through which molecules firstly make a free space to enter inside the adsorbed thiol molecules and then push neighboring molecules to get enough space to be adsorbed on the gold surface. The stability of ODT SAM was confirmed by analyzing different structural properties such as tilt angle, tilt orientation. and backbone orientation. We also calculated the diffusion coefficient of the ODT molecules which were on the top of SAM island. © 2019 Wiley Periodicals, Inc.     

Determining the feasibility of H2O2 production at a graphite cathode using bond dissociation energy: comparing simple and nitrogen doped cathodes

Research on Chemical Intermediates - Hydrogen peroxide (H2O2) is commercially produced by catalytic oxidation of anthrahydroquinone, which is energy-intensive. Electrochemical production of...     

A comparative study of electrocatalytic hydrogen evolution by iron complexes of corrole and porphyrin from acetic acid and water

Transition Metal Chemistry - Iron complexes of corrole and porphyrin bearing electron-withdrawing meso-C6F5 groups had been used for the electrocatalytic evolution of hydrogen. In neutral buffer...     

Doping radius effects on an erbium-doped fiber amplifier

In an erbium-doped fiber amplifier(EDFA), erbium ions act as a three-level system. Therefore, much higher pump energy is required to achieve the population inversion in an erbium-doped fiber(EDF). This higher pump energy requirement complicates the efficient design of an EDFA. However, efficient use of the pump power can improve the EDFA performance. The improved performance of an EDFA can be obtained by reducing the doping radius of the EDF. A smaller doping radius increases pump–dopant interactions and subsequently increases the pump–photon conversion efficiency. Decreasing the doping radius allows a larger proportion of dopant ions,which are concentrated near the core, to interact with the highest pump intensity. However, decreasing the doping radius beyond a certain limit will bring the dopant ions much closer and introduce detrimental ion–ion interaction effects. In this Letter, we show that an optimal doping radius in an EDF can provide the best gain performance. Moreover, we have simulated the well-known numerical aperture effects on EDFA gain performance to support our claim.     

N-acetyl-D-glucosamine kinase interacts with dynein light-chain roadblock type 1 at Golgi outposts in neuronal dendritic branch points

N-acetylglucosamine kinase (GlcNAc kinase or NAGK) is a ubiquitously expressed enzyme in mammalian cells. Recent studies have shown that NAGK has an essential structural, non-enzymatic role in the upregulation of dendritogenesis. In this study, we conducted yeast two-hybrid screening to search for NAGK-binding proteins and found a specific interaction between NAGK and dynein light-chain roadblock type 1 (DYNLRB1). Immunocytochemistry (ICC) on hippocampal neurons using antibodies against NAGK and DYNLRB1 or dynein heavy chain showed some colocalization, which was increased by treating the live cells with a crosslinker. A proximity ligation assay (PLA) of NAGK-dynein followed by tubulin ICC showed the localization of PLA signals on microtubule fibers at dendritic branch points. NAGK-dynein PLA combined with Golgi ICC showed the colocalization of PLA signals with somal Golgi facing the apical dendrite and with Golgi outposts in dendritic branch points and distensions. NAGK-Golgi PLA followed by tubulin or DYNLRB1 ICC showed that PLA signals colocalize with DYNLRB1 at dendritic branch points and at somal Golgi, indicating a tripartite interaction between NAGK, dynein and Golgi. Finally, the ectopic introduction of a small peptide derived from the C-terminal amino acids 74–96 of DYNLRB1 resulted in the stunting of hippocampal neuron dendrites in culture. Our data indicate that the NAGK-dynein-Golgi tripartite interaction at dendritic branch points functions to regulate dendritic growth and/or branching.     

MIL‐53(Fe) Metal–Organic Frameworks (MOFs) as an Efficient and Reusable Catalyst for the One‐Pot Four‐Component Synthesis of Pyrano[2,3‐c]‐pyrazoles

A novel and simple approach for the efficient and rapid synthesis of pyrano[2,3‐c]‐pyrazoleshas been accomplished via the four‐component condensation reaction of malononitrile, hydrazine hydrate, ethyl acetoacetate, and substituted aldehydes using MIL‐53(Fe) metal–organic framework (MOF) as a catalyst in ethanol at room temperature. Recycling studies have shown that the MIL‐53(Fe) can be readily recovered and reused six times without significant loss of its activity. The present protocol offers the advantages including short reaction times, simple workup, high yields, elimination of toxic solvents, no chromatographic purification and recoverability of the catalyst. Also, the catalyst was fully characterized by SEM, EDX, FT‐IR, XRD, TGA and TEM analysis.     

Preparation and Characterization of Bhant Leaves‐derived Nitrogen‐doped Carbon and its Use as an Electrocatalyst for Detecting Ketoconazole

In this study, the electrocatalytic characteristics of nitrogen‐doped carbon (NDC) prepared from Clerodendrum Infortunatum L leaves on a glassy carbon electrode (GCE) surface was evaluated with regards to its ability to detect the electroactive drug ketoconazole (KCZ). The NDC was prepared by carrying out a simple pyrolysis of dry powder of the leaves at 850 °C. The prepared NDC was characterized using field‐emission scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, X‐ray photoelectron spectroscopy and Brunauer‐Emmett‐Teller analysis, and was then used as an electrode material. The performance of the electrochemical KCZ sensor with the NDC‐modified glassy carbon electrode (NDC/GCE) was found to be optimal when using PBS buffer at pH 3 and a concentration of 0.1 mg/ml of NDC in the conjugate with Nafion polymer. Under these conditions, the NDC/GCE displayed a KCZ detection limit of 3 μM and a linear dependence of its response on KCZ concentration over a wide range of KCZ concentrations from 47 μM to 752 μM (R²=0.9742). These results confirmed the potential of NDC as an electrocatalyst.