Simultaneous determination of sulfoxaflor and its metabolites,X11719474 and X11721061, in brown rice and rice straw after field application using LC-MS/MS

The present study was carried out to develop an analytical method for simultaneously detecting and quantifying sulfoxaflor and its metabolites (X11721061, X11719474) in brown rice and rice straw using liquid chromatography–tandem mass spectrometry. The parent compound and its metabolites were extracted and purified using original ‘QuEChERS’ method with modification. The matrix-matched calibration curve of sulfoxaflor and its metabolites in both matrices achieved good linearity with determination coefficients (R²) ≥0.9944. The overall recoveries of sulfoxaflor at two fortification levels (rice: 0.2 and 1.0 mg/kg; rice straw: 0.4 and 2.0 mg/kg) ranged from 97.37% to 107.71% with relative standard deviations (RSDs) <5%. On the other hand, the recoveries of both metabolites (X11721061 and X11719474) at 0.1 and 0.5 mg/kg (rice) and 0.2 and 1.0 mg/kg (rice straw) were satisfactory with values ranging from 83.70 % to 112.60% with RSDs <8%. During storage at ?20°C, the analyte and its metabolites were stable for up to 87 days. The limits of quantification of 0.02 mg/kg were lower than the maximum residue limit (0.2 mg/kg) set by the Korean Ministry of Food and Drug Safety for brown rice. The method was successfully applied to paddy field treated with different programme schedules and a preharvest interval of 7 days was proposed based upon the current study. In sum, the developed method is accurate and reproducible for ensuring the reliable determination of sulfoxaflor (and its metabolites) in harvested rice grain and straw samples from the field. The residual level of parent compound does not seem to pose any hazardous effect and treated rice could be safely used for consumption.     

Prospecting Agro-waste Cocktail: Supplementation for Cellulase Production by a Newly Isolated Thermophilic <Emphasis Type="Italic">B. licheniformis</Emphasis> 2D55

Bacteria isolated from thermophilic environment that can produce cellulase as well as utilise agro-waste biomass have a high potential for developing thermostable cellulase required in the biofuel industry. The cost for cellulase represents a significant challenge in converting lignocellulose to fermentable sugars for biofuel production. Among three potential bacteria examined, Bacillus licheniformis 2D55 (accession no. KT799651) was found to produce the highest cellulolytic activity (CMCase 0.33 U/mL and FPase 0.09 U/mL) at 18–24 h fermentation when grown on microcrystalline cellulose (MCC) as a carbon source in shake flask at 50 °C. Cellulase production process was further conducted on the untreated and NaOH pretreated rice straw (RS), rice husk (RH), sugarcane bagasse (BAG) and empty fruit bunch (EFB). Untreated BAG produced the highest FPase (0.160 U/mL), while the highest CMCase (0.150 U/mL) was supported on the pretreated RH. The mixture of untreated BAG and pretreated RH as agro-waste cocktail has remarkably improved CMCase (3.7- and 1.4-fold) and FPase (2.5- and 11.5-fold) compared to the untreated BAG and pretreated RH, respectively. The mechanism of cellulase production explored through SEM analysis and the location of cellulase enzymes of the isolate was also presented. Agro-waste cocktail supplementation provides an alternative method for an efficient production of cellulase.     

Redox-active ionic-liquid-assisted one-step general method for preparing gold nanoparticle thin films: applications in refractive index sensing and catalysis

We describe a general one-step facile method for depositing gold nanoparticle (GNP) thin films onto any type of substrates by the in situ reduction of AuCl(3) using a newly designed redox-active ionic liquid (IL), tetrabutylphosphonium citrate ([TBP][Ci]). Various substrates such as positively charged glass, negatively charged glass/quartz, neutral hydrophobic glass, polypropylene, polystyrene, plain paper, and cellophane paper are successfully coated with a thin film of GNPs. This IL ([TBP][Ci]) is prepared by the simple neutralization of tetrabutylphosphonium hydroxide with citric acid. We also demonstrate that the [TBP][Ci] ionic liquid can be successfully used to generate GNPs in an aqueous colloidal suspension in situ. The deposited GNP thin films on various surfaces are made up of mostly discrete spherical GNPs that are well distributed throughout the film, as confirmed by field-emission scanning electron microscopy. However, it seems that some GNPs are arranged to form arrays depending on the nature of surface. We also characterize these GNP thin films via UV-vis spectroscopy and X-ray diffractometry. The as-formed GNP thin films show excellent stability toward solvent washing. We demonstrate that the thin film of GNPs on a glass/quartz surface can be successfully used as a refractive index (RI) sensor for different polar and nonpolar organic solvents. The as-formed GNP thin films on different surfaces show excellent catalytic activity in the borohydride reduction of p-nitrophenol.     

Multiple silicon-hydrogen bond activations at adjacent rhodium and iridium centers

The reaction of 1 equiv of primary silanes, SiH(3)R (R = Ph, Mes), with [RhIr(CO)(3)(dppm)(2)] yields mono(silylene)-bridged complexes of the type [RhIr(H)(2)(CO)(2)(μ-SiHR)(dppm)(2)] (R = Ph or Mes), while for R = Ph the addition of 2 equiv yields the bis(silylene)-bridged complexes, [RhIr(CO)(2)(μ-SiHPh)(2)(dppm)(2)]. The kinetic isomer of this bis(silylene)-bridged product has the phenyl substituent axial on one silylene unit and equatorial on the other, and in the presence of excess silane this rearranges to the thermodynamically preferred "axial-axial" isomer, in which the phenyl substituents on each bridging silylene unit are axial and parallel to one another. The reaction of 1 equiv of diphenylsilane with [RhIr(CO)(3)(dppm)(2)] produces the mono(silylene)-bridged product, [RhIr(H)(2)(CO)(2)(μ-SiPh(2))(dppm)(2)], and the subsequent addition of silane in the presence of CO yields the silyl/silylene product [RhIr(H)(SiPh(2)H)(CO)(3)(κ(1)-dppm)(μ-SiPh(2))(dppm)]. The reaction of [RhIr(CO)(3)(dppm)(2)] with 2 equiv of SiH(2)Me(2) yields the analogous product [RhIr(H)(SiMe(2)H)(CO)(3)(κ(1)-dppm)(μ-SiMe(2))(dppm)]. Low-temperature NMR spectroscopic observation of some key intermediates, such as [RhIr(H)(SiH(2)Ph)(CO)(2)(μ-CO)(dppm)(2)], formed during the formation of the mono(silylene)-bridged species provides evidence for a mechanism involving initial Si-H bond activation at Rh, followed by the subsequent Si-H bond activation at Ir. The Si-H bond activation of a second equivalent of silane seems to be initiated by dissociation of the Rh-bound end of one diphosphine. The reaction of diphenylsilane with the cationic complex [RhIr(CH(3))(CO)(2)(dppm)(2)][CF(3)SO(3)] gives rise to a different reactivity pattern in which Si-H bond activation is initiated at Ir. In this case, the cationic silyl-bridged species, [RhIr(CH(3))(CO)(2)(κ(1):η(2)-SiHPh(2))(dppm)(2)][CF(3)SO(3)], contains an agostic Si-H interaction with Rh. In solution, at ambient temperature, this complex converts to two species, [RhIr(H)(COCH(3))(CO)(μ-H)(μ-SiPh(2))(dppm)(2)][CF(3)SO(3)] and [RhIr(CO)(2)(μ-H)(μ-SiPh(2))(dppm)(2)] [CF(3)SO(3)], formed by the competing methyl migration to CO and reductive elimination of methane, respectively. In the diphenylsilylene dihydride product, a weak interaction between the bridging silicon and the terminal Ir-bound hydride is proposed on the basis of NMR evidence.     

KF-alumina-mediated Bargellini reaction

KF-alumina was found to be an efficient base for the synthesis of sterically hindered α-substituted carboxylic acids. A series of Bargellini reactions were performed by using various substituted anilines, phenols, and thiophenols as nucleophiles with ketones in the presence of chloroform and KF-alumina as a base. All the compounds were fully characterized.     

Directed immobilization of reduced antibody fragments onto a novel SAM on gold for myoglobin impedance immunosensing

The successful construction of an immunosensor depends on having an effective procedure for immobilising the bio-recognition element to the transducer surface. In the present study, an amino-terminated 4-aminothiophenol (ATP) self-assembled monolayer (SAM) was modified with heterobifunctional crosslinker sulfosuccinimidyl 4-[N-maleimidomethyl] cyclohexane-1-carboxylate to couple reduced anti-myoglobin half-antibody fragments. The disulphide groups present in the hinge region of IgG molecules were selectively cleaved by 2-mercaptoethylamine to produce reduced half-antibody fragments with free sulphydryl groups. The maleimide terminated 4-ATP SAM modified surface was coupled to these reduced antibody fragments to produce highly oriented immobilization of the half-antibody via its Fc domain and to allow free access to the Fv bindings sites. This represents an improvement by comparison with biotin/avidin mediated IgG attachment which is essentially randomly oriented. Functional immunosensors were able to detect myoglobin in both phosphate buffered saline and whole serum over the range of concentrations from 10(-13)M to 10(-6)M, and order of magnitude better than avidin/biotin linked immunosensors. In addition, atomic force microscopy (AFM) was carried out to elucidate the nanotopology of the immunosensor surface at different stages of fabrication; the images demonstrate that half antibodies bind as described and show structural changes on subsequent antigen binding.     

Sensitivity enhancement of CE and CE-MS for the analysis of peptides by a dynamic pH junction

An analytical method of CE-MS and CE with an online preconcentration technique induced by a dynamic pH junction, addition of organic solvent and large volume injection was developed for sensitive determination of peptides in biological samples. Leucine enkephalin, methionine enkephalin, dynorphin A, β-endorphin and angiotensin II were used as model peptides. The optimal online preconcentration conditions were obtained at a sample matrix consisting of 100?mM borate buffer (pH 10.0) with 50% v/v acetonitrile and a BGE containing 1?M formic acid at pH 2.0, along with a 25-cm injection length. Under the optimized conditions, a 4.0×10(3)-1.1×10(4)-fold increase in peak intensity was achieved without degrading the peak shape. This online preconcentration method was applied to analyze the intracellular angiotensin II within the peptides extracted from HL1 cells and approximately increase of 1×10(4)-fold sensitivity was achieved compared to normal condition. Thus, the developed method could be applied to the analysis of various peptides for peptidomics study in biological samples.     

Analysis of coir fiber acoustical characteristics

Coir fiber from coconut husk is an important agricultural waste in Malaysia. Acoustic absorption coefficient of the fiber as a porous material is studied in this paper. Two types of fiber are investigated, fresh from wet market and industrial prepared mixed with binder. Moreover two analytical models, namely; Delany–Bazley and Biot–Allard are used for analysis. Experimental measurements in impedance tube are conducted to validate the analytical outcomes. Results show that fresh coir fiber has an average absorption coefficient of 0.8 at f > 1360 Hz and 20 mm thickness. Increasing the thickness is improved the sound absorption in lower frequencies, having the same average at f > 578 Hz and 45 mm thickness. Delany–Bazley technique can be used for both types of fiber while Biot–Allard method is compensated for the industrial prepared fiber considering the binder additive. This form generally shows poor acoustical absorption in low frequencies. Inevitably, fiber has to be mixed with additives in commercial use to enhance its characteristics such as stiffness, unti-fungus and flammability. Hence other approaches such as adding air gap or perforated plate should be used to improve the acoustical properties of industrial treated coir fiber.