The current and capacitance response of radiation-damaged silicon PIN diodes

The current–voltage (I–V) and capacitance–voltage (C–V) characteristics of silicon p–i–n diodes have been investigated both prior to and after radiation-induced damage by 1 MeV neutrons. The results have been analysed and several rates of damage evaluated. The indication is mainly that radiation damage occurs only up to certain fluencies. Beyond these, the material becomes resistant to further damage. Thus, initial heavy radiation damage can be used to achieve radiation-hardness of detector diodes. This result is contrary to previous suggestions that continued irradiation renders the detectors inoperable but is in good agreement with our results on radiation-hardness induced by gold-doping.     

Development of a gradient elution preparative high performance liquid chromatography method for the recovery of the antibiotic ertapenem from crystallization process streams

A gradient elution preparative chromatography method was developed for the recovery of the antibiotic ertapenem from crystallization mother-liquor streams. The preparative HPLC method that was developed on the lab-scale employs an analytical size column of conventional dimensions (25 cm x 0.46 cm) packed with Kromasil C8 stationary phase. Gradient elution was used with aqueous acetic acid and acetonitrile as mobile phases. A target of processing approximately 30 mg of ertapenem per half an hour at a flow rate of 1.5 mL/min with high yield and adequate rejection of all major impurities was achieved. This corresponds to a productivity of approximately 0.6 kg ertapenem as free acid per kilogram of stationary phase per day (kkd). The scalability of the method was demonstrated by using a 5 cm i.d. column configuration to generate 10 g of purified ertapenem. This work complements a previous study improving on the productivity and throughput of the method by employing gradient elution and the use of crystallization to remove some key impurities that are chromatographically difficult to resolve [A. Vailaya, P. Sajonz, O. Sudah, V. Capodanno, R. Helmy, F.D. Antia, J. Chromatogr. A 1079 (2005) 80].     

An atomic force microscopy investigation of cyanophage structure

Marine viruses have only relatively recently come to the attention of molecular biologists, and the extraordinary diversity of potential host organisms suggests a new wealth of genetic and structural forms. A promising technology for characterizing and describing the viruses structurally is atomic force microscopy (AFM). We provide examples here of some of the different architectures and novel structural features that emerge from even a very limited investigation, one focused on cyanophages, viruses that infect cyanobacteria (blue-green algae). These were isolated by phage selection of viruses collected from California coastal waters. We present AFM images of tailed, spherical, filamentous, rod shaped viruses, and others of eccentric form. Among the tailed phages numerous myoviruses were observed, some having long tail fibers, some other none, and some having no visible baseplate. Syphoviruses and a podovirus were also seen. We also describe a unique structural features found on some tailed marine phages that appear to have no terrestrial homolog. These are long, 450 nm, complex helical tail fibers terminating in a unique pattern of 3+1 globular units made up of about 20 small proteins.     

Microstructure determination of AOT + phenol organogels utilizing small-angle X-ray scattering and atomic force microscopy.

Dry reverse micelles of the anionic twin-tailed surfactant bis(2-ethylhexyl) sulfosuccinate (AOT) dissolved in nonpolar solvents spontaneously form an organogel when p-chlorophenol is added in a 1:1 AOT:phenol molar ratio. The solvents used were benzene, toluene, m-xylene, 2,2,4-trimethylpentane (isooctane), decane, dodecane, tetradecane, hexadecane, and 2,6,10,14-tetramethylpentadecane (TMPD). The proposed microstructure of the gel is based on strands of stacked phenols linked to AOT through hydrogen bonding. Small-angle X-ray scattering (SAXS) spectra of the organogels suggest a characteristic length scale for these phenol-AOT strands that is independent of concentration but dependent on the chemical nature of the nonpolar solvent used. Correlation lengths determined from the SAXS spectra indicate that the strands self-assemble into fibers. Direct visualization of the gel in its native state is accomplished by using tapping mode atomic force microscopy (AFM). It is shown that these organogels consist of fiber bundle assemblies. The SAXS and AFM data reinforce the theory of a molecular architecture consisting of three length scales-AOT/phenolic strands (ca. 2 nm in diameter) that self-assemble into fibers (ca. 10 nm in diameter), which then aggregate into fiber bundles (ca. 20-100 nm in diameter) and form the organogel.     

Detection of temporal gaps in sinusoids by normally hearing and hearing-impaired subjects

A two-alternative forced-choice task was used to measure psychometric functions for the detection of temporal gaps in a 1-kHz, 400-ms sinusoidal signal. The signal always started and finished at a positive-going zero crossing, and the gap duration was varied from 0.5 to 6.0 ms in 0.5-ms steps. The signal level was 80 dB SPL, and a spectrally shaped noise was used to mask splatter associated with the abrupt onset and offset of the signal. Two subjects with normal hearing, two subjects with unilateral cochlear hearing loss, and two subjects with bilateral cochlear hearing loss were tested. The impaired ears had confirmed reductions in frequency selectivity at 1 kHz. For the normal ears, the psychometric functions were nonmonotonic, showing minima for gap durations corresponding to integer multiples of the signal period (n ms, where n is a positive integer) and maxima for durations corresponding to (n - 0.5) ms. For the impaired ears, the psychometric functions showed only small (nonsignificant) nonmonotonicities. Performance overall was slightly worse for the impaired than for the normal ears. The main features of the results could be accounted for using a model consisting of a bandpass filter (the auditory filter), a square-law device, and a sliding temporal integrator. Consistent with the data, the model demonstrates that, although a broader auditory filter has a faster transient response, this does not necessarily lead to improved performance in a gap detection task. The model also indicates that gap thresholds do not provide a direct measure of temporal resolution, since they depend at least partly on intensity resolution.     

Low-temperature Ce3+ luminescence in CsCdBr3 crystals

Ce³⁺-doped CsCdBr₃ shows several Ce³⁺ emissions due to a diversity of luminescent centers. The nature of these centers is discussed.     

High-brightness terawatt KrF* (248 nm) system

19 W/cm² range with improved shot-to-shot energy stability. This system gives a resulting brightness of ∼3.3×10²¹ W cm^-2 sr^-1. Received: 5 November 1996/Revised version: 29 November 1996     

Use of a self-assembling organogel as a reverse template in the preparation of imprinted porous polymer films

The concept of reverse templating of an organogel to form imprinted porous divinylbenzene polymer films with submicrometer channels is demonstrated. The organogel comprising a 1:1 molar ratio of two organogelators, that is, bis(2-ethylhexyl) sodium sulfosuccinate and 4-chlorophenol, was formed in divinylbenzene. The gel was cast as a thin film before UV polymerization of the solvent, and the organogelators were later removed by simple washing with water and isooctane. The integrity of the fiber bundles of the organogel was preserved during polymerization, and an exact hollow replica was obtained after the organogelators were leached away. It is easily possible to imprint gel fiber bundle structures into polymeric films through this technique. The gel can also be formed on macroporous substrates to yield supported thin porous polymeric films. With the incorporation of functional nanoparticles in AOT inverse micelles and hence the organogel, nanoparticle-containing porous polymer films exhibiting luminescence or magnetic properties are envisioned.     

Investigations of substituted benzofuran-3-carboxylates,benzo[1,2-b:4,5-b']difurans and benzo[1,2-b:4,3-b']difurans

The Michael addition of ethyl acetoacetate to benzoquinone, toluquinone, and chlorobenzo-quinone leads to formation of substituted 5-hydroxybenzofuran-3-earboxylates and linear benzo-[1,2-b:4,5-b']difurans. The previously reported structural proof for the benzodifurans obtained from chlorobenzoquinone and toluquinone, although correct in the conclusion, is shown to be invalid. Proof of the linear benzodifuran structures was obtained by comparison of the uv spectra with authentic angular benzo[1,2-b:4,3-b']difurans.