Palladium-catalyzed silylation of aryl chlorides with hexamethyldisilane

A method for the palladium-catalyzed silylation of aryl chlorides has been developed. The method affords desired product in good yield, is tolerant of a variety of functional groups, and provides access to a wide variety of aryltrimethylsilanes from commercially available aryl chlorides. Additionally, a one-pot procedure that converts aryl chlorides into aryl iodides has been developed.     

Improved control of the phosphorous surface concentration during in‐line diffusion of c‐Si solar cells by APCVD

Emitter formation for industrial crystalline silicon (c‐Si) solar cells is demonstrated by the deposition of phosphorous‐doped silicate glasses (PSG) on p‐type monocrystalline silicon wafers via in‐line atmospheric pressure chemical vapor deposition (APCVD) and subsequent thermal diffusion. Processed wafers with and without the PSG layers have been analysed by SIMS measurements to investigate the depth profiles of the resultant phosphorous emitters. Subsequently, complete solar cells were fabricated using the phosphorous emitters formed by doped silicate glasses to determine the impact of this high‐throughput doping method on cell performance. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of precursor gas ratio and firing on silicon surface passivation by APCVD aluminium oxide

Using a high throughput, in‐line atmosphere chemical vapor deposition (APCVD) tool, we have synthesized amorphous aluminum oxide (AlO_x) films from precursors of trimethyl‐aluminum (TMA) and O₂, yielding a maximum deposition 150 nm min^–1 per wafer. For p‐type crystalline silicon (c‐Si) wafers, excellent surface passivation was achieved with the APCVD AlO_x films, with a best maximum effective surface recombination velocity (S_eff,max) of 8 cm/s following a standard industrial firing step. The findings could be attributed to the existence of large negative charge (Q_f ≈ –3 × 10¹² cm^–2) and low interface defect density (D_it ≈ 4 × 10¹¹ eV^–1 cm^–2) achieved by the films. This data demonstrates a high potential for APCVD AlO_x to be used in high efficiency, low cost industrial solar cells. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Fabrication of DNA polymer brush arrays by destructive micropatterning and rolling-circle amplification

A method for fabricating DNA polymer brush arrays using photolithography and plasma etching followed by solid-phase enzymatic DNA amplification is reported. After attaching oligonucleotide primers to the surface of a glass coverslip, a thin layer of photoresist is spin-coated on the glass and patterned via photolithography to generate an array of posts in the resist. An oxygen-based plasma is then used to destroy the exposed oligonucleotide primers. The glass coverslip with the primer array is assembled into a microfluidic chip and DNA polymer brushes are synthesized on the oligonucleotide array by rolling-circle DNA amplification. We have demonstrated that the linear polymers can be rapidly synthesized in situ with a high degree of control over their density and length.     

Controllable selective exfoliation of high-quality graphene nanosheets and nanodots by ionic liquid assisted grinding

Bulk quantities of graphene nanosheets and nanodots have been selectively fabricated by mechanical grinding exfoliation of natural graphite in a small quantity of ionic liquids. The resulting graphene sheets and dots are solvent free with low levels of naturally absorbed oxygen, inherited from the starting graphite. The sheets are only two to five layers thick. The graphene nanodots have diameters in the range of 9-29 nm and heights in the range of 1-16 nm, which can be controlled by changing the processing time.     

The theory of cyclic voltammetry of electrochemically heterogeneous surfaces: comparison of different models for surface geometry and applications to highly ordered pyrolytic graphite

The cyclic voltammetry at electrodes composed of multiple electroactive materials, where zones of one highly active material are distributed over a substrate of a second, less active material, is investigated by simulation. The two materials are assumed to differ in terms of their electrochemical rate constants towards any given redox couple. For a one-electron oxidation or reduction, the effect on voltammetry of the size and relative surface coverages of the zones as well as the rate constant of the slower zone are considered for systems where it is much slower than the rate constant of the faster zones. The occurrence of split peak cyclic voltammetry where two peaks are observed in the forward sweep, is studied in terms of the diffusional effects present in the system. A number of surface geometries are compared: specifically the more active zones are modelled as long, thin bands, as steps in the surface, as discs, and as rings (similar to a partially blocked electrode). Similar voltammetry for the band, step and ring models is seen but the disc geometry shows significant differences. Finally, the simulation technique is applied to the modelling of highly-ordered pyrolytic graphite (HOPG) surface and experimental conditions under which it may be possible to observe split peak voltammetry are predicted.     

Synthesis and reactivity of an isolable cobalt(I) complex containing a β-diketiminate-based acyclic tetradentate ligand

A model for cobalamin was synthesized using a new monoanionic tetradentate nitrogen donor ligand; 2-(4-tolyl)-1,3-bis(2-isopropylpyridyl)propenediimine (Tol-BDI((2-pp)2)H) (1), which utilizes isopropylpyridines as pendant arms on a β-diketiminate (BDI) backbone. During the synthesis of 1, the rearrangement product, Tol-BDI((2-pp)(4-pp))H (2) was observed. Metalation of 1 with zinc iodide and cobalt chloride yielded the corresponding Tol-BDI((2-pp)2)ZnI (3) and Tol-BDI((2-pp)2)CoCl (4) complexes. The redox properties of 4 in comparison to cobalamin were examined through electrochemical studies. Electrochemical and bulk reduction of complex 4 gave a diamagnetic cobalt(I) complex, Tol-BDI((2-pp)2)Co (5). Reactivity of 5 toward C-X bonds was investigated using methyl iodide and 1-iodo-2-(trimethylsilyl)acetylene, yielding Tol-BDI((2-pp)2)Co(CH(3))I and Tol-BDI((2-pp)2)Co(C(2)Si(CH(3))(3))I respectively. Synthesis and characterization details for these complexes, including the crystal structure of 3, are reported.     

A versatile enantioselective synthesis of azabicyclic ring systems: a concise total synthesis of (+)-grandisine D and unnatural analogues

Closing in on azacines: We have developed a new six step approach for the rapid and enantioselective synthesis of indolizidine, pyrrolo[1,2-a]azepine, and pyrrolo[1,2-a]azocine azabicyclic systems and their respective lactam congeners, which are found in a host of natural products as well as pharmaceutical preparations. This protocol enables a concise enantioselective total synthesis of (+)-grandisine?D in 16.4?% overall yield from commercial materials (see scheme).     

Enhanced shape-selective recognition of anion guests through complexation-induced organization of porphyrin hosts

We present a fortuitous discovery of enhanced shape-selective recognition of anion guests that stems from a complexation-induced conformational change in porphyrin hosts upon anion binding. Porphyrin hosts reported here exist in a conformation that is not favorable to guest binding. Anions that bind strongly are those that can induce a conformational change in the host to allow guest binding. Furthermore, guests that mimic the shape of the newly formed pocket bind the strongest.