A procedure for sampling and analysis of air for energetics and related compounds

A procedure for the sampling and analysis of energetics and related compounds in the atmosphere is described. The basic procedure consists of the collection of air samples using sampling cartridges containing XAD-2 resin, extraction of the resin with isoamyl acetate, and an analysis of the extract using gas chromatography with electron capture detection. Modifications and additions to this procedure are discussed, such as the use of a prefilter before the resin sampler to collect particulates and the use of a mass selective detector to analyze for some propellant compounds of interest or for quantitative confirmation purposes. Two differing sizes of samplers are evaluated according to the air volumes required for collection. The procedure is tested through the analysis of spiked resin samples, which had air pulled through them for periods of time corresponding with the required sampling volumes. This procedure has application toward the measurement of energetic residues in atmospheres resulting from weapons testing and operations during training exercises involving munitions.     

Mechanisms for surface energy changes observed in plasma immersion ion implanted polyethylene: The roles of free radicals and oxygen-containing groups

Low density polyethylene (LDPE) was modified by plasma immersion ion implantation (PIII) with nitrogen ions of 20 keV. Surface energy and structural transformations were observed during storage of the modified LDPE in air after PIII, by wettability measurements and FTIR-ATR spectra respectively. The appearance of oxygen-containing groups has some kinetic stages with characteristic times from hours to days. The surface energy values attained and comparison with the kinetics of oxidation reveal that the initial changes in the surface energy of LDPE are caused mainly by free radicals and to a lesser extent by oxygen-containing groups. The final surface energies observed after the process known as hydrophobic recovery and the surface energies stabilize are attributable to oxygen-containing groups. The modified surface is “living” and an investigation of the wettability, surface energy, unsaturated and oxygen-containing groups in the surface layer of ion beam modified polymers is incomplete if the kinetics of structural transformations after modification is not taken into account.     

A dihydroxo-bridged Fe(II)-Fe(III) complex: a new member of the diiron diamond core family

The first structurally characterized Fe(II)-Fe(III) complex containing a M2(mu-OH)2 diamond core is a Robin and Day class II mixed-valence complex.     

Reversible Guest Binding in a Non‐Porous FeII Coordination Polymer Host Toggles Spin Crossover

Formation of either a dimetallic compound or a 1 D coordination polymer of adiponitrile adducts of [Fe(bpte)]²⁺ (bpte=[1,2‐bis(pyridin‐2‐ylmethyl)thio]ethane) can be controlled by the choice of counteranion. The iron(II) atoms of the bis(adiponitrile)‐bridged dimeric complex [Fe₂(bpte)₂(μ₂‐(NC(CH₂)₄CN)₂](SbF₆)₄ ( 2 ) are low spin at room temperature, as are those in the polymeric adiponitrile‐linked acetone solvate polymer {[Fe(bpte)(μ₂‐NC(CH₂)₄CN)](BPh₄)₂ ? Me₂CO} ( 3? Me₂CO). On heating 3? Me₂CO to 80 °C, the acetone is abruptly removed with an accompanying purple to dull lavender colour change corresponding to a conversion to a high‐spin compound. Cooling reveals that the desolvate 3 shows hysteretic and abrupt spin crossover (SCO) S=0?S=2 behaviour centred at 205 K. Non‐porous 3 can reversibly absorb one equivalent of acetone per iron centre to regenerate the same crystalline phase of 3? Me₂CO concurrently reinstating a low‐spin state.     

Synthesis of high‐order multiblock core cross‐linked star polymers

Core cross‐linked star (CCS) polymers with radiating arms composed of high‐order multiblock copolymers have been synthesized in a one‐pot system via iterative copper‐mediated radical polymerization. The employed “arm‐first” technique ensures the multiblock sequence of the macroinitiator is carried through to the star structure with no arm defects. The versatility of this approach is demonstrated by the synthesis of three distinct star polymers with differing arm compositions, two with an alternating ABABAB block sequence and one with six different block units (i.e. ABCDEF). Owing to the star architecture, CCS polymers in which the arm composition consists of alternating hydrophilic–hydrophobic (ABABAB) segments undergo supramolecular self‐assembly in selective solvents, whereas linear polymers with the same block sequence did not yield self‐assembled structures, as evidenced by DLS analysis. The combination of microstructural and topological control in CCS polymers offers exciting possibilities for the development of tailor‐made nanoparticles with spatially defined regions of functionality. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 135–143     

Di‐μ‐oxido‐bis{bis[N,N′‐bis(2‐pyridylmethyl)ethane‐1,2‐diamine]manganese(III,IV)} tris(perchlorate) hexahydrate: clarification of an order–disorder phase transition

The title compound, [Mn₂O₂(C₁₄H₁₈N₄)₂](ClO₄)₃·6H₂O, contains a mixed‐valent Mn^III/Mn^IV complex. In accordance with a previous report [Collins, Hodgson, Michelsen & Towle (1987). J. Chem. Soc. Chem. Commun. pp. 1659–1660], the structure at 295 K is best described in the space group C2/c, with the complex exhibiting twofold rotational symmetry, and with half site occupancy for one perchlorate anion and several solvent water molecules. At 180 K, the structure is ordered in the subgroup P2₁/n and is clearly shown to be a hexahydrate, rather than the previously reported trihydrate. The origin of the order–disorder phase transition lies in the thermal motion of the perchlorate anions.     

Progress toward multiplexed sample-to-result detection in low resource settings using microfluidic immunoassay cards

In many low resource settings multiple diseases are endemic. There is a need for appropriate multi-analyte diagnostics capable of differentiating between diseases that cause similar clinical symptoms. The work presented here was part of a larger effort to develop a microfluidic point-of-care system, the DxBox, for sample-to-result differential diagnosis of infections that present with high rapid-onset fever. Here we describe a platform that detects disease-specific antigens and IgM antibodies. The disposable microfluidic cards are based on a flow-through membrane immunoassay carried out on porous nitrocellulose, which provides rapid diffusion for short assay times and a high surface area for visual detection of colored assay spots. Fluid motion and on-card valves were driven by a pneumatic system and we present designs for using pneumatic control to carry out assay functions. Pneumatic actuation, while having the potential advantage of inexpensive and robust hardware, introduced bubbles that interfered with fluidic control and affected assay results. The cards performed all sample preparation steps including plasma filtration from whole blood, sample and reagent aliquoting for the two parallel assays, sample dilution, and IgG removal for the IgM assays. We demonstrated the system for detection of the malarial pfHRPII antigen (spiked) and IgM antibodies to Salmonella Typhi LPS (patient plasma samples). All reagents were stored on card in dry form; only the sample and buffer were required to run the tests. Here we detail the development of this platform and discuss its strengths and weaknesses.     

A three-state effective Hamiltonian for symmetric cationic diarylmethanes

We analyze the low-energy electronic structure of a series of symmetric cationic diarylmethanes, which are bridge-substituted derivatives of Michler's Hydrol Blue. We use a four-electron, three-orbital complete active space self-consistent field and multi-state multi-reference perturbation theory model to calculate a three-state diabatic effective Hamiltonian for each dye in the series. We exploit an isolobal analogy between the active spaces of the self-consistent field solutions for each dye to represent the electronic structure in a set of analogous diabatic states. The diabatic states can be identified with the bonding structures in classical resonance-theoretic models of cyanine dyes. We identify diabatic states with opposing charge and bond-order localization, analogous to the classical resonance structures, and a third state with charge on the bridge. While the left- and right-charged structures are similar for all dyes, the structure of the bridge-charged diabatic state, and the Hamiltonian matrix elements connected to it, change significantly across the series. The change is correlated with an inversion of the sign of the charge carrier on the bridge, which changes from an electron pair to a hole as the series is traversed.