On the Reality of the Eigenvalues for a Class of -Symmetric Oscillators

 We study the eigenvalue problem with the boundary conditions that decays to zero as z tends to infinity along the rays , where is a real polynomial and . We prove that if for some we have for all , then the eigenvalues are all positive real. We then sharpen this to a larger class of polynomial potentials. In particular, this implies that the eigenvalues are all positive real for the potentials when with , and with the boundary conditions that decays to zero as z tends to infinity along the positive and negative real axes. This verifies a conjecture of Bessis and Zinn-Justin. Received: 16 January 2002 / Accepted: 1 May 2002 Published online: 6 August 2002     

Structural evolution in amorphous silicon and germanium thin films.

The structural evolution in amorphous silicon and germanium thin films has been investigated by high-resolution transmission electron microscopy (HRTEM) in conjunction with autocorrelation function (ACF) analysis. The results established that the structure of as-deposited semiconductor films is of a high density of nanocrystallites embedded in the amorphous matrix. In addition, from ACF analysis, the structure of a-Ge is more ordered than that of a-Si. The density of embedded nanocrystallites in amorphous films was found to diminish with annealing temperature first, then to increase. The conclusions also corroborate well with the results of diminished medium-range order in annealed amorphous films determined previously by a variable coherence microscopy method.     

Possible Loss and Recovery of Gibbsianness¶During the Stochastic Evolution of Gibbs Measures

We consider Ising-spin systems starting from an initial Gibbs measure ν and evolving under a spin-flip dynamics towards a reversible Gibbs measure μ≠ν. Both ν and μ are assumed to have a translation-invariant finite-range interaction. We study the Gibbsian character of the measure νS(t) at time t and show the following: (1) For all ν and μ, νS(t) is Gibbs for small t. (2) If both ν and μ have a high or infinite temperature, then νS(t) is Gibbs for all t > 0. (3) If ν has a low non-zero temperature and a zero magnetic field and μ has a high or infinite temperature, then νS(t) is Gibbs for small t and non-Gibbs for large t. (4) If ν has a low non-zero temperature and a non-zero magnetic field and μ has a high or infinite temperature, then νS(t) is Gibbs for small t, non-Gibbs for intermediate t, and Gibbs for large t. The regime where μ has a low or zero temperature and t is not small remains open. This regime presumably allows for many different scenarios. Received: 26 April 2001 / Accepted: 10 October 2001     

Stable multi-sets

In this paper we introduce a generalization of stable sets: stable multi-sets. A stable multi-set is an assignment of integers to the vertices of a graph, such that specified bounds on vertices and edges are not exceeded. In case all vertex and edge bounds equal one, stable multi-sets are equivalent to stable sets.  For the stable multi-set problem, we derive reduction rules and study the associated polytope. We state necessary and sufficient conditions for the extreme points of the linear relaxation to be integer. These conditions generalize the conditions for the stable set polytope. Moreover, the classes of odd cycle and clique inequalities for stable sets are generalized to stable multi-sets and conditions for them to be facet defining are determined.  The study of stable multi-sets is initiated by optimization problems in the field of telecommunication networks. Stable multi-sets emerge as an important substructure in the design of optical networks. Received: February 14, 2001/Revised version: September 7, 2001     

MODEL COMPARISON FOR ACOUSTIC SCATTERING BY A SPHERICAL AIR BUBBLE IN WATER

The oscillation of a bubble has many vibrational modes, contributing to different portions in acoustic scattering. Without approximations a priori, an hydrodynamic approach is applied to investigate acoustic scattering by a bubble in water, taking into account the heat exchange and viscosity. The scattering function is derived for a wide range of frequencies. Examples are shown to illustrate the thermal and viscous effects on sound scattering. Comparison is made with three existing models. While these models are known not to be applicable for high frequencies, it is shown here that even in the low-frequency region, there are also noticeable discrepancies between the exact solution and the three existing models with regard to the scattering properties such as the scattering cross-section, and the quality factor of resonant peaks. By numerical simulation, we claim that the discrepancies may be due to the incomplete consideration of the thermal exchange process in the previous models. The approach presented here is valid for any other fluid enclosure in liquids.     

Magnetic properties of oxygenated carbon nitride films from RF-discharge in an acetylene, nitrogen, and oxygen mixture environments

Properties of oxygenated carbon nitride films have attracted the attention of physics researchers due to their magnetic and physical properties, as well as for their usefulness in the industry. The free radicals were investigated using electron paramagnetic resonance applied in the study of spin concentration due to the different mechanism of preparation of carbon nitride films by RF-discharge with different kinds of plasma. Unpaired spin concentrations, in the order of 10²⁰ per cm³, were measured and their time recombination dependency was important in those films. The films were grown by plasma enhanced chemical vapor deposition using mixtures of hydrocarbons, N₂ and O₂ in different proportions.     

A comprehensive study of the long pulse Nd:YAG laser drilling of multi-layer carbon fibre composites

The results of an extensive experimental study of the free running Nd:YAG laser drilling of a multi-layer carbon fibre composite, where adjacent layers have differently orientated fibres, are reported. For holes drilled with the laser operating in fixed-Q mode at 1064 nm, parallel sections of blind holes illustrating discontinuities in the hole size along a given section direction will be shown to occur at the interface between adjacent layers. An explanation for this effect is proposed. Detailed single pulse drilling characteristics will be presented illustrating the exit hole diameter as a function of pulse energy and material thickness. These characteristics illustrate a ‘stable' drilling regime in which the exit hole diameters are least sensitive to changes in pulse energy or material thickness and a less ‘stable' regime in which they are more strongly dependent on these parameters. Drilling characteristics will be given for two different beam qualities, illustrating the greater drilling depth and reduced hole size achievable with an improved beam quality. Finally holes drilled through a 2 mm thick sample of material with multiple pulses are considered. Size distribution curves for entrance and exit holes will be presented. The total energy required (number of pulses × pulse energy) to drill through 2 mm thick material will be reported as a function of pulse energy in stationary air and argon atmospheres and in a partial vacuum, illustrating a threshold energy which is dependent upon the drilling atmosphere. The threshold energies will be discussed with reference to plasma formation and the reactivity of the drilling atmosphere.     

The cardinality of manifold atlases

It is shown that any finite dimensionalC ⁰ manifold (connected and Hausdorff but otherwise unrestricted) has an atlas of cardinality not greater than that of the continuum; while if it has a Hölder continuous pseudo-Riemannian metric then there is a countable atlas.     

Rb saturation spectroscopy with an optically narrowed FM diode laser

A fast-frequency modulated (FM) diode laser has been optically narrowed using the technique of resonant optical feedback, to provide linewidths in each FM mode of ≈ 200 kHz peak-to-peak. With a drive frequency of 50 MHz and modulation index of 0.2, the FM laser has been used for the first time to obtain Doppler-free FM spectra of the Rb D₁ line at 795 nm. The potential use of this system for laser frequency stabilisation is discussed.