Monomer reactivity ratios for acrylonitrile–methyl acrylate free‐radical copolymerization

Nonlinear monomer reactivity ratios for the homogeneous free‐radical copolymerization of acrylonitrile and methyl acrylate were determined from ¹H NMR and real‐time Fourier transform infrared (FTIR) analyses. All ¹H NMR data were obtained on polymers isolated at low conversions (<10%), whereas the FTIR data were collected in situ. The copolymerizations were conducted in N,N‐dimethylformamide at 62 °C and were initiated with azobisisobutyronitrile. The real‐time FTIR technique allowed for many data points to be collected for each feed composition, which enabled the calculation of copolymer compositions (dM₁/dM₂) with better accuracy. Monomer reactivity ratios were estimated with the Mayo–Lewis method and then were refined via a nonlinear least‐squares analysis first suggested by Mortimer and Tidwell. Thus, monomer reactivity ratios at the 95% confidence level were determined to be 1.29 ± 0.2 and 0.96 ± 0.2 for acrylonitrile and methyl acrylate, respectively, which were valid under the specific system conditions (i.e., solvent and temperature) studied. The results are useful for the development of acrylonitrile (<90%) and methyl acrylate, melt‐processable copolymer fibers and films, including precursors for carbon fibers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2994–3001, 2004     

Sulfonated naphthalene dianhydride based polyimide copolymers for proton‐exchange‐membrane fuel cells. I. Monomer and copolymer synthesis

A novel sulfonated diamine, 3,3′‐disulfonic acid‐bis[4‐(3‐aminophenoxy)phenyl]sulfone (SA‐DADPS), was prepared from m‐aminophenol and disodium‐3,3′‐disulfonate‐4,4′‐dichlorodiphenylsulfone. The conditions necessary to synthesize and purify SA‐DADPS in high yields were investigated in some detail. This disulfonated aromatic diamine, containing ether and sulfone linkages, was used to prepare N‐methyl‐2‐pyrrolidinone‐soluble, six‐membered ring polyimide copolymers containing pendent sulfonic acid groups by a catalyzed one‐step high‐temperature polycondensation in m‐cresol. These materials showed much improved hydrolytic stability with respect to phthalimides. High‐molecular‐weight film‐forming statistical copolymers with controlled degrees of disulfonation were prepared through variations in the stoichiometric ratio of disulfonated diamine (SA‐DADPS) in its soluble triethylamine salt form to several unsulfonated diamines. Three unsulfonated diamines, bis[4‐(3‐aminophenoxy)phenyl] sulfone, 4,4′‐oxydianiline, and 1,3‐phenylenediamine, were used to prepare the copolymers. The characterization of the copolymers by ¹H NMR, Fourier transform infrared, ion‐exchange capacity, and thermogravimetric analysis demonstrated that SA‐DADPS was quantitatively incorporated into the copolymers. Solution‐cast films of the sulfonated copolymers were prepared and afforded tough, ductile membranes with high glass‐transition temperatures. Methods were developed to acidify the triethylammonium salt membranes into their disulfonic acid form, this being necessary for proton conduction in a fuel cell. The synthesis and characterization of these materials are described in this article. Future articles will describe the performance of these copolymers as proton‐exchange membranes in hydrogen/air and direct methanol fuel cells. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 862–874, 2004     

Semiempirical Predictions of Chemical Degradation Reaction Mechanisms of CL-20 as Related to Molecular Structure

Combining computer chemistry calculation with experimental verification is useful both in proving concepts and what is chemically possible. Computational predictions, using MOPAC quantum mechanical and classical force field mechanics, were used to investigate most likely first-tier intermediates of cyclic and cage cyclic nitramines—comparing bond lengths and angles, heats of formation, steric energy, dipole moments, solvent accessibility and electrostatic potential surfaces, partial charges, and Highest Occupied Molecular Orbitals/Lowest Unoccupied Molecular Orbitals (HOMO/LUMO) energies. Two competing modes of degradation are summarized: through addition of hydroxide ions and through addition of photo-induced free radicals. UV/VIS measured concentrations and followed the course of reactions. FTIR followed CL-20 degradation through alkali hydrolysis, where FTIR measurements verified theoretical predictions.     

Adsorption of polymers at the solution–solid interface. XIV. Adsorption and steric stabilization with styrene–acrylonitrile copolymers

The adsorption of random copolymers of styrene and acrylonitrile of azeotropic composition from their trichloroethylene solutions onto precipitated silica exhibits a maximum at intermediate molecular weights. These copolymers are able to stabilize dispersions of some, but not all, grades of precipitated silica; here, too, a maximum effect is found at intermediate molecular weights. Copolymers are partially desorbed by ethyl cyanide, which destabilizes silica dispersions. Block copolymers of low acrylonitrile contents do not stabilize well but, when preadsorbed, affect the behavior of subsequently adsorbed random copolymers. In particular, high molecular weight random copolymers flocculate the pretreated silica; silica with grafted polyacrylonitrile chains may also be flocculated by these copolymers.     

Synthesis and characterization of sulfonated poly(acrylene ether sulfones)

Ionic groups incorporated into a polymer have a decided effect on its physical properties. A number of ionomers and polyelectrolytes have been widely applied. In particular, sulfonated bisphenol-A polysulfone (SPSF) has been used as a composite or single-component membrane for the desalination of water. In this article, the synthesis and physical characteristics of sulfonated polysulfone are addressed. A detailed synthesis route is provided and methods that yield determinable levels of sulfonation are described. These ion-containing polymers retain an excessive amount of residual salts, which, of course, are impurities to the system. Therefore, before any analyses were made the polymers were subjected to a thorough soxhlet extraction process with boiling water, which appeared to be quite effective. The degree of sulfonation was assessed by several methods such as ¹H NMR and FT-IR. A new ¹H NMR method was derived because the method cited in the literature proved to be too inconsistent for our work. The new ¹H NMR method used a quaternary ammonium counterion [N(CH₃)₄]. These methyl protons are easily measured and may be ratioed against the isopropylidene protons in the polymer backbone that act as an internal standard. Characterization of the physical properties of SPSF consisted of water uptake, differential scanning calorimetry (DSC), thermomechanical analysis (TMA), and solubility studies. Its physical appearance and mechanical behavior were improved by the solution procedure. Also addressed were the effects of different counterions (Na⁺ & Mg⁺⁺) with SPSFs of low levels of sulfonation. The variation in physical properties between the divalent and monovalent counterions is dramatic, especially when observed by TMA in the rubber plateau above the apparent glass temperature.     

Microwave Transmission Technique for Accurate Impedance Characterization of Superconductive Bolometric Mixers

The impedance of the submillimeter superconducting hot-electron bolometer mixer was measured in the range 0.2-4 GHz. A special technique relying on determination of the S ₂₁ transmission parameter of the device was used. Many advantages of the technique (wide frequency range, in situ calibration, low test power, accuracy) are demonstrated. The estimate of the mixer bandwidth from the impedance data using the mixer theory is in good agreement with the results of the direct bandwidth measurements.     

Gol’danskii–Karyagin effect and induced fieldsin rare earth-transition metal stannides

The asymmetric doublet obtained in earlier ¹¹⁹Sn Mssbauer measurements of ternary stannides is re-interpreted as being due to the Gol’danskii–Karyagin effect instead of a β-Sn impurity included in the structure. Measurements in applied magnetic fields show that the conduction electron polarization at the Sn(2) site of ErRh_1.1Sn_3.6 is of the opposite sign to that of PrRh _x Sn _y and PrCo _x Sn _y .