Improved branching ratio measurement for the decay K(0)(L) --> &mgr;(+)&mgr;(-)

We report results from Experiment 871, performed at the BNL AGS, of a measurement of the branching ratio K(0)(L)-->&mgr;(+)&mgr;(-) with respect to the CP-violating mode K(0)(L)-->pi(+)pi(-). This experiment detected over 6200 candidate &mgr;(+)&mgr;(-) events, a factor of 6 more than that seen in all previous measurements combined. The resulting branching ratio gamma(K(0)(L)-->&mgr;(+)&mgr;(-))/gamma(K(0)(L)-->pi(+)pi(-)) = (3. 474+/-0.057)x10(-6) leads to a branching fraction B(K(0)(L)-->&mgr;(+)&mgr;(-)) = (7.18+/-0.17)x10(-9), which is consistent with the current world average, and reduces the uncertainty in this decay mode by a factor of 3.     

Studying the active-site loop movement of the S?o Paolo metallo-β-lactamase-1

Metallo-β-lactamases (MBLs) catalyse the hydrolysis of almost all β-lactam antibiotics. We report biophysical and kinetic studies on the São Paulo MBL (SPM-1), which reveal its Zn(ii) ion usage and mechanism as characteristic of the clinically important di-Zn(ii) dependent B1 MBL subfamily. Biophysical analyses employing crystallography, dynamic ¹⁹F NMR and ion mobility mass spectrometry, however, reveal that SPM-1 possesses loop and mobile element regions characteristic of the B2 MBLs. These include a mobile α3 region which is important in catalysis and determining inhibitor selectivity. SPM-1 thus appears to be a hybrid B1/B2 MBL. The results have implications for MBL evolution and inhibitor design.     

Mechanism of white phosphorus activation by three-coordinate molybdenum(III) complexes: a thermochemical, kinetic, and quantum chemical investigation

White phosphorus (P(4)) reacts with three-coordinate molybdenum(III) trisamides or molybdaziridine hydride complexes to produce either bridging or terminal phosphide (P(3)(-)) species, depending upon the ancillary ligand steric demands. Thermochemical measurements have been made that place the MoP triple bond dissociation enthalpy at 92.2 kcal.mol(-)(1). Thermochemical measurements together with computational analysis rule out simple P-atom abstraction from P(4) as a step in the phosphorus activation mechanism. Kinetic measurements made by the stopped-flow method show that the reaction between the monomeric molybdenum complexes and P(4) is first-order both in metal complex and in P(4). Cyclo-P(3) complexes can be obtained when ancillary ligand steric demands are small, but kinetic measurements rule them out as monometallic intermediates in the P(4) activation mechanism. Also studied by calorimetric, kinetic, and in one case variable-temperature NMR methods is the process of mu-phosphide bridge formation. Post-rate-determining steps of the P(4) activation process were examined in a search for minima on the reaction's potential energy surface, leading to the proposal of two plausible, parallel, bimetallic reaction channels.     

The inhibition of factor inhibiting hypoxia-inducible factor (FIH) by beta-oxocarboxylic acids

Cyclic beta-oxocarboxylic acids inhibit factor inhibiting hypoxia-inducible factor via ligation to the active site iron.     

The turnover of a tissue specific cell surface ligand which inhibits lectin induced capping

Ten-day-old embryonic chick neural retina release into the environment glycoprotein ligands which bind to homologous cells, inhibiting the lectin-induced redistribution of cell surface receptors. Material with identical activity is released from trypsin-dissociated neural retina cells that are allowed to repair in culture for 2 h and are then transferred to fresh medium. Release of ligand is inhibited by cytosine arabinoside, hydroxyurea, UDP, and EDTA, and is potentiated by MnCl2. These data suggest that a glycosyltransferase reaction plays a critical role in the turnover of the cell surface ligand. Reactivation of enzymatically deglycosylated ligand solutions by intact cells provides further support for this hypothesis. Release of ligand is also accompanied by a loss of the agglutinability of the cells by a tissue-specific component which accumulates in monolayer conditioned medium. Conditions which inhibit release maintain maximal agglutinability suggesting similar mechanisms mediate both processes.     

Thermodynamic and kinetic studies of H atom transfer from HMo(CO)3(eta(5)-C5H5) to Mo(N[t-Bu]Ar)3 and (PhCN)Mo(N[t-Bu]Ar)3: direct insertion of benzonitrile into the Mo-H bond of HMo(N[t-Bu]Ar)3 forming (Ph(H)C=N)Mo(N[t-Bu]Ar)3

Synthetic studies are reported that show that the reaction of either H2SnR2 (R = Ph, n-Bu) or HMo(CO)3(Cp) (1-H, Cp = eta(5)-C5H5) with Mo(N[t-Bu]Ar)3 (2, Ar = 3,5-C6H3Me2) produce HMo(N[t-Bu]Ar)3 (2-H). The benzonitrile adduct (PhCN)Mo(N[t-Bu]Ar)3 (2-NCPh) reacts rapidly with H2SnR2 or 1-H to produce the ketimide complex (Ph(H)C=N)Mo(N[t-Bu]Ar)3 (2-NC(H)Ph). The X-ray crystal structures of both 2-H and 2-NC(H)Ph are reported. The enthalpy of reaction of 1-H and 2 in toluene solution has been measured by solution calorimetry (DeltaH = -13.1 +/- 0.7 kcal mol(-1)) and used to estimate the Mo-H bond dissociation enthalpy (BDE) in 2-H as 62 kcal mol(-1). The enthalpy of reaction of 1-H and 2-NCPh in toluene solution was determined calorimetrically as DeltaH = -35.1 +/- 2.1 kcal mol(-1). This value combined with the enthalpy of hydrogenation of [Mo(CO)3(Cp)]2 (1(2)) gives an estimated value of 90 kcal mol(-1) for the BDE of the ketimide C-H of 2-NC(H)Ph. These data led to the prediction that formation of 2-NC(H)Ph via nitrile insertion into 2-H would be exothermic by approximately 36 kcal mol(-1), and this reaction was observed experimentally. Stopped flow kinetic studies of the rapid reaction of 1-H with 2-NCPh yielded DeltaH(double dagger) = 11.9 +/- 0.4 kcal mol(-1), DeltaS(double dagger) = -2.7 +/- 1.2 cal K(-1) mol(-1). Corresponding studies with DMo(CO)3(Cp) (1-D) showed a normal kinetic isotope effect with kH/kD approximately 1.6, DeltaH(double dagger) = 13.1 +/- 0.4 kcal mol(-1) and DeltaS(double dagger) = 1.1 +/- 1.6 cal K(-1) mol(-1). Spectroscopic studies of the much slower reaction of 1-H and 2 yielding 2-H and 1/2 1(2) showed generation of variable amounts of a complex proposed to be (Ar[t-Bu]N)3Mo-Mo(CO)3(Cp) (1-2). Complex 1-2 can also be formed in small equilibrium amounts by direct reaction of excess 2 and 1(2). The presence of 1-2 complicates the kinetic picture; however, in the presence of excess 2, the second-order rate constant for H atom transfer from 1-H has been measured: 0.09 +/- 0.01 M(-1) s(-1) at 1.3 degrees C and 0.26 +/- 0.04 M(-1) s(-1) at 17 degrees C. Study of the rate of reaction of 1-D yielded kH/kD = 1.00 +/- 0.05 consistent with an early transition state in which formation of the adduct (Ar[t-Bu]N)3Mo...HMo(CO)3(Cp) is rate limiting.     

Molybdenum chalcogenobenzimidato complexes: radical synthesis and nitrile extrusion via beta-EPh (E = S, Se, and Te) elimination

Molybdenum chalcogenobenzimidates of formula (Ph[PhE]C=N)Mo(N[t-Bu]Ar)(3) (Ar = 3,5-C(6)H(3)Me(2)) have been obtained by treatment of Mo(N[t-Bu]Ar)(3) sequentially with benzonitrile and 0.5 equiv of PhEEPh (E = S, Se, and Te). Molecular structure determinations have been carried out for the S and Se variants. The Te variant extrudes PhCN forming structurally characterized (PhTe)Mo(N[t-Bu]Ar)(3) with facility assessed via stopped-flow kinetic measurements, while the Se and S analogues exhibit increasing stability. Quantum chemical calculations and solution calorimetry have been employed as an aid to interpretation of the PhCN extrusion reaction.