Optimization of Ormosil Films for Optical Sensor Applications

Recent work has indicated that Ormosil films, fabricated from organically modified precursors, produce better sensor performance for some specific applications, compared to films fabricated from conventional sol-gel precursors such as TEOS or TMOS. This paper aims to compare film properties and sensor behavior for films fabricated from tetraethoxysilane (TEOS) and tetramethoxysilane (TMOS) silica precursors and both methyltrimethoxysilane (MTMS) and methyltriethoxysilane (MTES) organically modified precursors. Microstructural differences, for example, porosity changes due to the different precursor backbone structures, are interrogated by monitoring oxygen gas and aqueous-phase sensor response. Oxygen sensing using these films is enabled by incorporating in the films an oxygen-sensitive ruthenium dye whose fluorescence is quenched in the presence of oxygen. Film properties such as thickness, thickness stabilization time, as well as sensor response, are discussed in terms of relative hydrolysis and condensation behavior for the different precursors. Film hydrophobicity, an issue which has been identified as being of crucial importance for optimum dissolved oxygen sensor response, is discussed and contact angle measurements are used to investigate the degree of hydrophobicity for different film types. The main motivation for this work is film optimization for optical gas-phase and dissolved oxygen sensors.     

Ionic Association and Mobility IV. Ionophores in Dimethylsulfoxide at 25°C

The results of conductance measurements on pyridinium picrate, tetraphenylo-sonium picrate, potassium picrate, tetraphenylantimony picrate, tetrapropylam-monium, tetrafluoroborate, tetramethylammonium hexafluorophosphate ion association noncoulombic interaction in dimethyl sulfoxide (DMSO) at 25°C in the concentration range 1–15×10^–4 M are reported. The data were analyzed by the Justice modification of the Fuoss–Hsia equation. Except for pyridinium picrate all salts studied were found to be associated.Application of the Justice Barthel–Bjerrum model of ion association permitted calculation of the noncoulombic portion of the potential of mean force, W _±. Ionic limiting conductances were calculated for six ions using known values of previously determined transport numbers. A table of most current limiting ionic conductances for a variety of ions in DMSO at 25°C has been established.     

The raised-cosine wavelets in computerized tomography

In Computerized Tomography (CT), an image must be recovered from its sampled projections in the form of values of the Radon transform. In this work a method of recovering the image is based on the properties of the raised-cosine wavelet. This wavelet has a closed form which allows for certain precomputations and avoids convolution. The rate of convergence of the resulting algorithm to the image density function is found under suitable hypotheses. This algorithm is then tested on the standard Shepp–Logan     

Polynomials: a theme which should not be forgotten

There is a definite movement to remove many of the topics concerning polynomials from the school curriculum. The purpose of this paper is to point out why this movement is misguided and should be reversed.     

Mathematical attitudes and semantic differentials

The semantic differential—one approach to attitude measurement— basically records a combination of a person's associations with a particular concept with a scaling procedure. This paper considers the implications of such a device for teachers of mathematics.     

Spectrally selective coatings of gold nanorods on architectural glass

Infrared-blocking coatings on window glass can be produced by dispersing gold nanorods into a polymer coating. The spectral selectivity of the coating is controlled by the shape and aspect ratio of the nanoparticles, which are in turn determined by the conditions applied during their synthesis. Coatings of nanorods in polyvinyl alcohol were deposited onto glass and characterized in both laboratory and sun-lit conditions. Selective attenuation of the near-infrared was demonstrated with the test panels transmitting approximately one-third of the incident solar radiation and absorbing nearly two-thirds. The high absorptive cross sections of the gold nanorods suggest that they can be applied in efficacious coatings at relatively low volume fractions.     

At-line bioprocess monitoring by immunoassay with rotationally controlled serial siphoning and integrated supercritical angle fluorescence optics

In this paper we report a centrifugal microfluidic “lab-on-a-disc” system for at-line monitoring of human immunoglobulin G (hIgG) in a typical bioprocess environment. The novelty of this device is the combination of a heterogeneous sandwich immunoassay on a serial siphon-enabled microfluidic disc with automated sequential reagent delivery and surface-confined supercritical angle fluorescence (SAF)-based detection. The device, which is compact, easy-to-use and inexpensive, enables rapid detection of hIgG from a bioprocess sample. This was achieved with, an injection moulded SAF lens that was functionalized with aminopropyltriethoxysilane (APTES) using plasma enhanced chemical vapour deposition (PECVD) for the immobilization of protein A, and a hybrid integration with a microfluidic disc substrate. Advanced flow control, including the time-sequenced release of on-board liquid reagents, was implemented by serial siphoning with ancillary capillary stops. The concentration of surfactant in each assay reagent was optimized to ensure proper functioning of the siphon-based flow control. The entire automated microfluidic assay process is completed in less than 30 min. The developed prototype system was used to accurately measure industrial bioprocess samples that contained 10 mg mL⁻¹ of hIgG.     

II. Ionic association and mobility in propylene carbonate

Conductance data are reported for Ph₄AsPic, Ph₄PPic, Ph₄SbPic, Hex₄NPic, Bu₄PPic, Et₄NSbCl₆ in propylene carbonate at 25°C in the concentration range 1×10^–4 to 15×10^–4 M. The data were analyzed by the Justice modification of the Fuoss-Hsia equation and all salts studied were found to be associated and to form solvent separated ion pairs. Application of the Barthel-Bjerrum model of ion association permitted calculation of the non coulombic portion of the potentials of mean force, W_±. Ionic limiting equivalent conductances of six ions were calculated using known values of R₄N⁺, and Pic^– ions. Walden products of ions in propylene carbonate were examined in the light of modern ion mobility theories, including Boyd-Zwanzig, Hubbard-Onsager, and Hubbard-Kayser models of ion solvent interactions.     

Demonstration of a surface plasmon-coupled emission (SPCE)-based immunoassay in the absence of a spacer layer

The technique of surface plasmon-coupled emission (SPCE) involves the coupling of light which is emitted from a fluorophore into the surface plasmon of an adjacent thin metal film, giving rise to highly directional emission. We have combined the advantages of SPCE with the high light collection efficiency of supercritical angle fluorescence by carrying out an immunoassay on a paraboloid array biochip in the absence of the conventional SPCE spacer layer normally used to minimize metal quenching of the fluorescence. In this work, we have successfully demonstrated an SPCE-based assay by utilizing the protein assay layer as the spacer layer. A novel 3 × 3 injection molded polymer biochip with paraboloid elements was used. The paraboloid elements served to enhance the light collection efficiency while the top surface was coated with a gold layer to use excitation of surface plasmons and detection of SPCE emission. Theoretical modeling of the gold-protein layer structure showed that the surface plasmon resonance angles were located in the detection range of the paraboloid biochip. The polarization dependence of SPCE emission was also demonstrated. Finally, a human IgG sandwich immunoassay was carried out which exhibited a limit of detection of ~10 ng/ml using 3σ. The results demonstrate the potential of the SPCE-based paraboloid array biochip as a novel platform for high-throughput analysis of biomolecular interactions.     

Microwave bonding of poly(methylmethacrylate) microfluidic devices using a conductive polymer

Component binding within microfluidic devices is a problem that has long been seeking a solution. In this investigation, the use of microwave radiation to seal PMMA components has been investigated using polyaniline as an absorber that is capable of inducting interfacial bonding. Straight microchannels were machined into PMMA using a Datron CAT3DM6 CNC machine with widths and depths across a range of 100-1000 μm. Prototype fluidic devices were prepared with channel patterns utilizing varying feature sizes, bends and flow profiling to demonstrate the application of the technique to real microfluidic devices. Experimental data illustrated the successful bonding of channels in the range stated previously and bonding (tensile) strength was assessed via pull tests on bonded PMMA using an Engstrom Zwick 100 tensile testing system (Engstrom Ltd, US). Coherent, defect free seals were attained with breakage tests requiring an excess of 1 kN force.