On the Parametrization of the Afocal Stable Distributions

Thanks to Hall's documentation of a situation he described asa ‘Comedy of errors’ in the earlier literature onstable distributions, there is now general agreement as to theparametrization of these distributions when standardized asto location and scale. However, two subtly different parametrizationsof location and scale remain current in the afocal stable cases,defined as those with characteristic exponent = 1 and skewnessparameter ß 0. The more widely used parametrization,adopted by Hall and two recent monographs, lacks the linearityproperty that is ordinarily expected of location and scale parameters.This note shows that the alternative parametrization has thislinearity property, and compares the implications of the twoparametrizations for properties of stable distributions. A thirdrecent monograph seeks to avoid these issues by denying thatthe afocal stable distributions are stable at all, but it isshown that they are, in fact, integral members of the stablefamily.     

Synthesis of two dihydropyrroloindoledione‐based copolymers for organic electronics

Two novel dihydropyrroloindoledione (DPID)‐based copolymers have been synthesized in a two directional approach and characterized (gel permeation chromatography (GPC), ultraviolet‐visible (UV–vis), cyclic voltammetry, and computational models). These planar, broad absorption copolymers show promise for use in organic electronics, with deep energy levels and low bandgaps. The two‐directional Knoevenagel condensation used demonstrates the versatility of DPID as a useful yet underexploited conjugated unit. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

The U.S. Department of Energy (DOE) Sampling and Analytical Chemistry Guide: Doe Methods for Evaluating Environmental and Waste Management Samples

Abstract

DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) is a guidance/methods document to support sampling and analysis activities at DOE sites. DOE Methods is intended to supplement existing guidance documents (e.g., EPA's Test Methods for Evaluating Solid Waste, SW-846), which generally apply to low-level or nonradioactive samples. DOE Methods targets the complexities of DOE radioactive mixed waste and environmental samples. The document contains quality assurance (QA), quality control (QC), safety, sampling, organic analysis, inorganic analysis, and radioanalytical guidance as well as sampling and analytical methods. An addendum is distributed every six months (April and October) with updated guidance and additional methods.

DOE Methods provides a vehicle for technology transfer within the environmental restoration (ER) and waste management (WM) (collectively known as EM) community. As DOE Methods evolves, its usefulness and applicability are anticipated to grow to meet the demands of the DOE/EM mission. At the present time, DOE Methods contains methods and guidance information supplied by DOE sites. Because the EM activities in DOE are not unique to the United States, the international environmental community could benefit from the information gathered for the DOE program. This information could provide additional resources for their EM activities.     

Nuclear Uptake of Gold Nanoparticles Deduced Using Dual‐Angle X‐Ray Fluorescence Mapping

Studies into the cell nucleus' incorporation of gold nanoparticles (AuNPs) are often limited by ambiguities arising from conventional imaging techniques. Indeed, it is suggested that to date there is no unambiguous imaging evidence for such uptake in whole cells, particularly at the single nanoparticle level. This shortcoming in understanding exists despite the nucleus being the most important subcellular compartment in eukaryotes and gold being the most commonly used metal nanoparticle in medical applications. Here, dual‐angle X‐ray flouresence is used to show individually resolved nanoparticles within the cell nucleus, finding them to be well separated and 79% of the intranuclear population to be monodispersed. These findings have important implications for nanomedicine, illustrated here through a specific exemplar of the predicted enhancement of radiation effects arising from the observed AuNPs, finding intranuclear dose enhancements spanning nearly five orders of magnitude.     

Effect of crystallographic orientation on the anodic formation of nanoscale pores/tubes in TiO2 films

Self-organized nanopores and nanotubes have been produced in thin films of titanium (Ti) prepared using filtered cathodic vacuum arc (FCVA), DC- and RF-sputter deposition systems. The anodization process was performed using a neutral electrolyte containing fluoride ions with an applied potential between 2 and 20 V (for clarity the results are only presented for 5 V). Scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD) techniques were used to characterise the films. It was found that the crystallographic orientation of the Ti films played a significant role in determining whether pores or tubes were formed during the anodic etching process.     

Random benzotrithiophene-based donor-acceptor copolymers for efficient organic photovoltaic devices

A series of benzotrithiophene-containing random terpolymers for polymer solar cells is reported. Through variations of the two other components in the terpolymers, the absorption profile and the frontier energy levels are optimized and maximum power conversion efficiencies are nearly doubled (5.14%) relative to the parent alternating copolymer.     

Lamination method for the study of interfaces in polymeric thin film transistors

A method for the fabrication of polymeric thin-film transistors (TFTs) by lamination is described. Poly(dimethylsiloxane) stamps were used to delaminate thin films of semiconducting polymers from silicon wafers coated with a self-assembled monolayer (SAM) formed from octyltrichlorosilane. These supported films were laminated onto electrode structures to form coplanar TFTs. The fabrication process was used to make TFTs with poly(3-hexylthiophene), P3HT, and poly[5,5'-bis(3-dodecyl-2-thienyl)-2,2'-bithiophene], PQT-12. TFTs, where these polymers were laminated onto gate dielectrics coated with SAMs from octyltrichlorosilane, had effective field-effect mobilities of 0.03 and 0.005 cm2/(V s), respectively. TFTs where PQT-12 was laminated onto gate dielectrics that were not coated with a SAM also had mobility of 0.03 cm2/(V s). In contrast, TFTs fabricated by spin-coating PQT-12 onto the same structure had mobilities ranging from 10-3 to 10-4 cm2/(V s). These results suggest that the lower mobilities of polymer TFTs made with hydrophilic gate dielectrics are caused by molecular ordering in the semiconducting film rather than electronic effects of dipolar groups at the interface.     

Synthesis of novel thieno[3,2-b]thienobis(silolothiophene) based low bandgap polymers for organic photovoltaics

Thieno[3,2-b]thienobis(silolothiophene), a new electron rich hexacyclic monomer has been synthesized and incorporated into three novel donor-acceptor low-bandgap polymers. By carefully choosing the acceptor co-monomer, the energy levels of the polymers could be modulated and high power conversion efficiencies of 5.52% were reached in OPV devices.     

The phase behavior of a polymer‐fullerene bulk heterojunction system that contains bimolecular crystals

Polymer:fullerene blends have been widely studied as an inexpensive alternative to traditional silicon solar cells. Some polymer:fullerene blends, such as blends of poly(2,5‐bis(3‐tetradecylthiophen‐2‐yl)thieno[3,2‐b]thiophene (pBTTT) with phenyl‐c71‐butyric acid methyl ester (PC₇₁BM), form bimolecular crystals due to fullerene intercalation between the polymer side chains. Here we present the determination of the eutectic pBTTT:PC₇₁BM phase diagram using differential scanning calorimetry (DSC) and two‐dimensional grazing incidence X‐ray scattering (2D GIXS) with in‐situ thermal annealing. The phase diagram explains why the most efficient pBTTT:PC₇₁BM solar cells have 75–80 wt % PC₇₁BM since these blends lie in the center of the only room‐temperature phase region containing both electron‐conducting (PC₇₁BM) and hole‐conducting (bimolecular crystal) phases. We show that intercalation can be suppressed in 50:50 pBTTT:PC₇₁BM blends by using rapid thermal annealing to heat the blends above the eutectic temperature, which forces PC₇₁BM out of the bimolecular crystal, followed by quick cooling to kinetically trap the pure PC₇₁BM phase. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Gibbs Sampling with Diffuse Proper Priors: A Valid Approach to Data-Driven Inference?

Abstract

This article demonstrates by example that the use of the Gibbs sampler with diffuse proper priors can lead to inaccurate posterior estimates. Our results show that such inaccuracies are not merely limited to small sample settings.