Adsorption properties of activated carbon from waste newspaper prepared by chemical and physical activation

Adsorption properties of activated carbons prepared from waste newspaper by chemical and physical activation were investigated using water vapor, ammonia, methane, and methylene blue (MB) as adsorbents. The water vapor adsorption isotherms show type V behavior and the maximum vapor adsorption of the chemically and physically activated products is about 1050 and 450 ml/g, respectively. The higher water vapor adsorption of the chemically activated products is attributed to the higher specific surface area (S(BET)) and greater hydrophilic activity (arising from the surface oxygen-containing functional groups) than in the physically activated products. The adsorption of ammonia and methane was measured by temperature-programmed desorption (TPD). NH(3) adsorption is found to be higher in the chemically activated product than in the physically activated product while methane adsorption is slightly higher in the physically activated products even though these have lower S(BET) values. In the MB adsorption, the chemically activated products show higher adsorption (390 mg/g) than the physically activated product. These results are suggested to be related to the surface characteristics.     

Photoreaction of anthracenyl phosphine oxides: Usual reversible photo- and heat-induced emission switching,and unusual oxidative PC bond cleavage

Anthracenyl(diphenyl)phosphine oxide and dianthracenylphenylphosphine oxide as photoactive compounds have been synthesized. Anthracenyl group of these compounds indicate the multi-functional roles such as an emission component, a photodimerization component, and a leaving group. When the light irradiation was performed under an oxygen atmosphere, photo-oxidative PC bond cleavage to leave the antharacenyl group was observed. Moreover, phosphonyl radical was produced and then PP bond formation to form diphosphane was observed.     

Study on the structures of 2-substituted iminothiazolidine derivatives

The reaction of 2-bromoethylamine 1 with methylisothiocyanate 2 under mild condition gave 2-methyl-amino-2-thiazoline 3 as the major product together with two kinds of byproducts, 3-(N-methylthiocar-bamoyl)-2-methyliminothiazolidine 4 and N,N′-dimethyl-N-(2-thiazolin-2-yl)thiourea 5. Thermal isomer-ization of 5 to 4 was observed. The structures of the byproducts were confirmed by X-ray crystallography.     

Phylogenetic analysis of picoplankton in Lake Biwa and application to legal medicine

Three strains of picoplankton designated as brown, green, and pink belonging to the Synechococcus genus in cyanobacteria (approximately 1 microm in size) are found ubiquitously in Lake Biwa, Japan. However, they could not be morphologically discriminated from other bacteria such as Proteobacteria and Bacillus by microscopy. In this study, we attempted to use the polymerase chain reaction (PCR) analysis of the 16S ribosomal DNA (rDNA) from picoplankton for the diagnosis of death by drowning. A segment of 16S rDNA was sequenced in order to investigate their phylogenetic relationships and to design the specific primers. The PCR products from three picoplanktons were compared with those from five other cyanobacteria, Melosira (diatom), Staurastrum (green alga), bacteria from Lake Baikal, and humans. The picogram order of template DNA from picoplankton was specifically amplified by the primers. When the template of picoplankton was mixed with human tissue, at least 10 ng of template DNA was needed to obtain a PCR product. The efficiency of PCR was increased more than hundredfold by isolating the picoplankton from human lung tissue. The specific PCR products of the picoplankton were obtained from a formalin-fixed drowning body (lung and liver) that was found in a downstream river and Lake Biwa. The PCR analysis of the picoplanktion 16S rDNA is considered useful for the diagnosis of death by drowning.     

PtBr2-catalyzed consecutive enyne metathesis-aromatization of 1-(1-methoxy-but-3-enyl)-2-(1-alkynyl)benzenes: dual role of the Pt catalyst

1,7-Enynes 1, connected through an aromatic ring and bearing a leaving methoxy group at the 4-position, underwent the PtBr(2)-catalyzed enyne metathesis followed by aromatization in one pot to afford vinyl naphthalenes 3 in good to acceptable yields. The cyclobutene intermediate 11a and another intermediate 2a were isolated, indicating that PtBr(2) acts as a dual role catalyst: (1) as a transition metal catalyst, it induces the enyne metathesis to produce 11a starting from 1a, and (2) as a Lewis acid catalyst, it facilitates elimination of MeOH from 2a to give the aromatized product 3a.     

New organosols of nickel sulfides,palladium sulfides,manganese sulfide,and mixed metal sulfides and their use in preparation of semiconducting polymer-metal sulfide composites

Organosols of NiS, PdS, and MnS in N,N-dimethylformamide were prepared by reaction of the metal acetate with H₂S. Organosols of mixed-metal sulfides (Zn _x Cd_1–x S, Hg _x Cd_1–x S, Hg _x Cu_1–x S, Cd _x Mn_1–x S, Hg _x Mn_1–x S, Hg _x Cd_1–x S, and Mn _x Zn_1–x S) were similarly obtained by reaction of mixtures of the metal salts with H₂S. The organosol of Zn_0.5Cd_0.5S contained particle with two particle size distributions centered at 6.5 nm and 29 nm, as revealed by Ar laser-scattering analysis. The metal sulfides are recovered by addition of Et₂O to the organosols. Zn _x Cd_1–x S thus obtained shows magnetic susceptibility in the range 0.5×10^–6–2.3×10^–6 emug^–1 depending on thex value. Addition of polymers to the organosols affords semiconducting films of metal sulfide-polymer composites.     

A novel oligothiophene derivative as a hole‐transport with emitting material for OLED

A novel oligothiophene derivative containing the triphenylamine moiety with high glass transition temperature (T_g; 135 °C), 5,5′‐{bis[4‐di(4‐thiophenyl)amino]phenyl}‐2,2′‐bithiophene (TTPA‐dimer) was synthesized by the dimerization of tris[4‐(2‐thienyl)phenyl]amine (TTPA) with a palladium catalysis. Some types of electroluminescent (EL) devices that use the amorphous material for a hole‐ and an electron‐transporting with an emitting layer were fabricated. These devices emitted a bright green‐yellowish light (λ_emi; around 510 nm) with a small full width at half maximum (FWHM) rather than that of Alq₃. The single layer EL device showed a maximum luminance of 221 cd/m² at 8 V (0.06 lm/W at 100 cd/m²). On the other hand, the double layer (TTPA‐dimer/Alq₃) EL device that used Alq₃ as the electron transport material was increased up to 10830 cd/m² at 12 V (0.89 lm/W at 300 cd/m²) and with a lower turn‐on voltage (3.2 V at 0.1 cd/m²) than other types of EL devices. Copyright © 2003 John Wiley & Sons, Ltd.     

Stereoselective acid-catalyzed homoallylic rearrangement of cyclopropylsilylmethanols: an efficient route to Z-homoallyl derivatives

Treatment of cyclopropylsilylmethanols derived from cyclopropyl silyl ketones with acid catalyst gives the corresponding silyl-substituted homoallyl derivatives in high yields with good stereoselectivity, independent of the substituents on the cyclopropyl ring. Cyclopropylsilylmethanols having a n-, s-butyl or phenyl group on the carbinyl carbon react to afford the E-homoallyl derivatives selectively. On the other hand, the reaction of cyclopropylsilylmethanols having a tert-butyl group gives Z-isomers exclusively. The following protiodesilylation of the resulting homoallyl derivatives proceeds with retention of configuration.     

Elucidation of solid-state complexation in ground mixtures of cholic acid and guest compounds

The solid-state complexation between cholic acid (CA) and either methyl p-hydroxybenzoate (MPB) or ibuprofen (IBP) was investigated. Powder X-ray diffractometry, IR spectroscopy and thermal analysis suggested the complex formation between CA and MPB as well as between CA and IBP by co-grinding method. The stoichiometry of CA-MPB was 1 : 1 while that of CA-IBP was 2 : 1, reflecting the effect of guest size on complex formation. The guest compounds were assumed to be included in the channel of complexes formed by hydrogen bonds among CA molecules.     

Classical trajectory calculations of intramolecular vibrational energy redistribution. I. Methanol-water complex

Intramolecular vibrational energy redistributions of the O-H stretching (nuOH) vibration for the methanol monomer and its water complex, the methanol-water dimer, are investigated by using ab initio full-dimensional classical trajectory calculations. For the methanol monomer, in the high-energy regime of the 5nuOH overtone, the time dependence of the normal-mode energies indicates that energy flowed from the initial excited O-H stretching mode to the C-H stretching mode. This result confirms the experimental observation of energy redistribution between the O-H and C-H stretching vibrations [L. Lubich et al., Faraday Discuss. 102, 167 (1995)]. Furthermore, a lot of dynamical information in the time domain is contained in the power spectra, whose density is given by the Fourier transformation of the total momentum obtained from trajectory calculations. For the methanol-water hydrogen-bonded complex, at the high-energy level of the 5nuOH overtone, the calculated power spectrum shows considerable splitting and broadening, indicating significant energy redistribution through strong coupling between the O-H stretching vibration and other vibrations. It is thus clear that the A-H...B hydrogen-bond formation facilitates energy redistribution subsequent to the vibrational excitation of the hydrogen-bonded A-H stretching mode.