Combined NMR and quantum chemical studies on the interaction between trehalose and dienes relevant to the antioxidant function of trehalose

In a previous study (Oku, K.; Watanabe, H.; Kubota, M.; Fukuda, S.; Kurimoto, M.; Tujisaka, Y.; Komori, M.; Inoue, Y.; Sakurai, M. J. Am. Chem. Soc. 2003, 125, 12739), we investigated the mechanism of the antioxidant function of trehalose against unsaturated fatty acids (UFAs) and revealed that the key factor relevant to the function is the formation of OH...pi and CH...O hydrogen bonds between trehalose and the cis double bonds of the UFA. Here, we investigate whether such intriguing interactions also occur between this sugar and cis double bonds in other unsaturated compounds. For this purpose, we selected various diene compounds (1,3-butadiene, 1,3-pentadiene, 1,4-pentadiene, and 2,5-heptadiene) as interaction partners. All NMR experiments performed, including 1H-1H NOESY measurements, indicated that trehalose selectively interacts with the cis-olefin proton pair in the above diene with a 1:1 stoichiometry, and the C-3 (C-3') and C-6' (C-6) sites of the sugar are responsible for the interaction. Similar interactions were not observed for the mixtures of the diene and other saccharides (neotrehalose, kojibiose, nigerose, maltose, isomaltose, sucrose, maltitol, and sorbitol). Quantum chemical calculations revealed that the OH-3 and OH-6 groups bind to the olefin double bonds of the diene through OH...pi and CH...O types of hydrogen bonds, respectively, and the stabilization energy of the resulting complex is 5-6 kcal mol(-1). These results strongly support the above NMR results. Finally, the activation energies were calculated for the hydrogen abstraction reactions from the activated methylene group of heptadiene. In particular, when the reaction was initiated by a methyl radical, the activation energy was only 10 kcal mol(-1) for the free heptadiene, but on complexation with trehalose it drastically increased to ca. 40 kcal mol(-1). This indicates that trehalose has a significant depression effect on the oxidation of the diene compounds. These results strongly support the antioxidant mechanism deduced in the previous study and indicate that the formation of unique multiple hydrogen bonds between trehalose and cis-olefin bonds is rather a general event not confined to the case of UFA.     

Preparation and properties of metallacyclobutanes of nickel and palladium

Bis(phosphine)-3,3-dimethylnickela- and palladacyclobutanes have been prepared by intramolecular C-H insertion reaction of the corresponding dineopentyl metal complexes. Nickelacyclobutane complexes decompose when heated thereby undergoing competitive carbon-carbon bond cleavage to give isobutene and ethylene, with reductive elimination affording 1,1-dimethylcyclopropane and skeletal isomeri-zation of the metallacyclic ring yielding 3-methyl-1-butene, whereas the palladium analog gave no significant amounts of CC bond cleavage products.Added phos-phine was seen to have an effect on CC bond scission of nickelacyclobutane complexes. Nickelacyclobutane complexes in solution are thought to be in equilibrium with olefin-coordinated nickel-carbene complex on the basis of available experimental evidence from hydrogenolysis, carbene-trap reactions with olefins and reaction with carbon monoxide     

Synthesis of pyrazolo[3,4-d]pyrimidine derivatives using ketene dithioacetals

The cyclization of 5-amino-3-methylthiopyrazole-4-carbonitriles or 4-carboxamides 3a-j , which were prepared by the reaction of ketene dithioacetals 1a,b [1a : bis(methylthiomethylenemalononitrile; 1b : bis(methylthio)methylenecyanoacetamide] with hydrazines (hydrazine hydrate, phenylhydrazine, p-chlorophenylhydrazine, p-nitrophenylhydrazine), with formamide or carbon disulfide proceeded to give the corresponding 4-amino- or 4-hydroxy-3-methylthiopyrazolo[3,4-d]pyrimidines 6a-h in good yields. 3-Aminopyrazolo[3,4-d]pyrimidine derivatives 6i-1 were also obtained by the application of the cyclization reaction of 3,5-diaminopyrazoles with formamide.     

Quantitative analysis of protein adsorption on a planar surface by Fourier transform infrared spectroscopy: lysozyme adsorbed on hydrophobic silicon-containing polymer

The adsorption of hen egg white lysozyme onto a solid polytris(trimethylsiloxy)silylstyrene (pTSS) surface from a D(2)O solution at pD 7 containing 100 mM NaCl and 10 mM sodium deuterated phosphate was monitored at 25 degrees C by Fourier transform infrared spectroscopy using the attenuated total reflection (ATR) method. The infrared spectrum attributed to only the adsorbed lysozyme was derived from the observed spectrum, and the amount of adsorbed lysozyme was determined as a function of time and lysozyme concentration. The kinetics of adsorption could be decomposed into two components, one of which was a process with a time constant of larger than 4 h(-1) and the other was a process with one of about 0.1 h(-1). These spectra showed that the lysozyme adsorbed in the faster process had a higher beta-structure content than the dissolved lysozyme. It was also found that the slower adsorption induced some conformational change in the lysozyme adsorbed in the faster process and/or that adsorbed in the slower process. After adsorption for 24 h, the pTSS surface was rinsed out with lysozyme-free solution. The resultant spectra of the surface indicated that the lysozyme adsorbed in the faster process was bound irreversibly on the surface and was changed to a conformer with a higher beta-structure content during the slower process. The experimental procedures and the theoretical applications for such a quantitative analysis in the ATR spectroscopic method are presented in detail.     

Resonance Raman spectra of 15N enriched metallooctaethylorphyrins. Characterization of the oxidation state marker bands of hemoproteins

Resonance Raman spectra of ¹⁵N enriched metallooctaethylporphyrins [M(OEP) ? ¹⁵N₄] [M = Ni²⁺, Fe³⁺ (high spin), and Fe³⁺ (low spin)] were observed. Polarized Raman lines corresponding to the oxidation state marker band of hemoproteins were observed at 1377 (Ni), 1369 (Fe high spin) and 1372^?1 (Fe low spin) which were shifted to lower frequency from those of the ¹⁴N compounds by 6, 5, and 6 cm^?1, respectively. The vibrational mode for this band was shown to include an appreciable contribution of the C_αN symmetric stretching vibration and to be associated with ca. 0.01 Å of in-phase displacement of the four pyrrole nitrogens toward the metal ion.     

Practical synthesis of d-[1-C]mannose, l-[1-C] and l-[6-C]fucose

The chemical synthesis of ¹³C-labeled mannose and fucose is important for the preparation of molecular probes used in the conformational study of the oligosaccharide portions of glycoproteins. A new method for the synthesis of the title [1-¹³C]-labeled compounds via the corresponding olefin compounds, which are in turn derived from d-mannitol or l-arabinose by efficient introduction of ¹³C, by the Wittig reaction using Ph₃P¹³CH₃I and n-BuLi, is described. The introduction of ¹³CH₃I to produce the [1-¹³C]- and [6-¹³C]-labeled compounds was accomplished in 62%, 56%, and 71% yields, respectively. All mannose and fucose protons, from H-1 to H-6, were observed by the HMQC-TOCSY technique using 1:1 mixtures of [1-¹³C]- and [6-¹³C]-labeled compounds.     

SmI2-induced reductive cyclization of optically active β-alkoxyvinyl sulfoxides with aldehyde

SmI₂-induced reductive cyclization of optically active (E)- and (Z)-β-alkoxyvinyl sulfoxides with aldehyde was developed for the construction of several stereoisomers of tetrahydropyran derivatives.     

A practical procedure for the synthesis of multifunctional aldehydes through the Fukuyama reduction and elucidation of the reaction site and mechanism

A highly efficient heterogeneous Pd/C catalyst D1 was found to effect the reduction of thiol esters 1 to the corresponding aldehydes 2 with such a low catalyst loading as 0.5-1.0 mol %. The chemical properties of the Pd/C catalysts together with the XRF analysis reveal that the reduction is most likely to proceed on the solid surface of the Pd/C catalyst rather than in the solution phase outside the pores. A reaction mechanism through oxidative addition of Pd to the thiol esters 1 was postulated by detection of the oxidative addition intermediate by React IR analysis. A practical purification of 2 was accomplished by conversion to water-soluble bisulfite adducts 7.     

Asymmetric [2 + 1] Cycloaddition Reactions of 1-Seleno-2-silylethene

The reaction of (E)-1-(phenylseleno)-2-(trimethylsilyl)ethene (1) and vinyl ketones 2a-d in the presence of a chiral Lewis acid prepared from TiCl(4), Ti(O(i)Pr)(4), (R)- or (S)-1,1'-binaphthol (BINOL), and MS4A gave enantiomerically enriched cis cyclopropane products 3a-d. The enantiomeric excess and chemical yield varied depending on the ratio of TiCl(4) and Ti(O(i)Pr)(4) to 1. Reproducible results (43-47% ee/33-41% yields) for cis-1-acetyl-2-[(phenylseleno)(trimethylsilyl)methyl]cyclopropane (3a) were obtained using 1.1 equiv of TiCl(4), 0.54-0.65 equiv of Ti(O(i)Pr)(4), and 1.65 equiv of BINOL. The observed enantioselectivity was explained by consideration of the structure of the postulated intermediates, alkoxy titanium-carbonyl complexes, via ab initio MO calculations.     

Fixation of Atmospheric Nitrogen: Synthesis of Heterocycles with Atmospheric Nitrogen as the Nitrogen Source

Dry air is the source of molecular nitrogen for reactions with TiL₄, Li, and TMSCl (L = Cl, OiPr; TMS = trimethylsilyl). The nitrogen–titanium complexes thus prepared can be used to synthesize indoles, pyrroles, and lactams from carbonyl compounds. Applying this method to 1 provides access to 2 , the key compound in the synthesis of (±)-lycopodine.