On-line measurement of intramolecular carbon isotope distribution of acetic acid by continuous-flow isotope ratio mass spectrometry

Molecular and intramolecular carbon isotope measurements of acetic acid present in natural environments have been performed by off-line procedures. The off-line method is complicated and time-consuming and requires micromolar to millimolar amounts of sample. This limits geochemical isotopic studies, especially at the intramolecular level, on acetic acid present in natural samples. Here, we examine an on-line measurement of intramolecular carbon isotope distribution of acetic acid using continuous-flow isotope ratio mass spectrometry (CF-IRMS) coupled with an on-line pyrolysis system. This is achieved by measurement of the respective carbon isotope ratios of CH4 and CO2 produced by on-line pyrolysis of acetic acid. Results for authentic standards of pure acetic acid demonstrated the practicality of this on-line method, although the carbon isotope ratio of the methyl group could not be determined directly. The precision of the carbon isotope measurements was 0.4 per thousand (1sigma). The carbon isotope distribution determined by the on-line method was identical to that determined by the conventional off-line method within analytical error. The advantages of the on-line method compared with the conventional off-line method are that it is less laborious, requires less analytical time (less than one hour per sample) and, most importantly, uses smaller sample sizes (ca. 10 nanomole). An application of this on-line method to natural geochemical samples will provide an insight into the geochemical cycle of acetic acid.     

Efficient regioselective aldol condensation of methyl ketones promoted by organoaluminum compounds,and its application to muscone synthesis

Regioselective aldol condensation of 2-octanone and 2-butanone at the methyl side proceeded in high yields using a system of dialkylaluminum phenoxide/tertiary amine. The intramolecular aldol condensation of 2,15-hexadecanedione was carried out by the same system, especially di-i-butylaluminum phenoxide/pyridine, to give dehydromuscone in 65% yield. Its hydrogenation afforded muscone (3-methylcyclopentadecanone).     

Metal-complex assemblies constructed from the flexible hinge-like ligand H2bhnq: structural versatility and dynamic behavior in the solid state

Novel metal-complex assemblies constructed from the flexible hinge-like ligand H(2)bhnq (H(2)bhnq=2,2'-bi(3-hydroxy-1,4-naphthoquinone)) have been synthesized. The X-ray crystal structures of these compounds reveal that four types of architectures are accessible by variation of the metal ions. In copper(II) compounds 1-3, the chelating bhnq(2-) ions bridge copper(II) centers to form one-dimensional zigzag chains. The chains of 1-3 are arranged by hydrogen-bonding interactions and stacking interactions to produce porous structures. Cobalt(II) and zinc(II) compounds 4 and 5 form one-dimensional helical chains. In 4 and 5, the crystal packing induces spontaneous resolution of the helical chains with chiral cavities formed perpendicular to the helices. Nickel(II) compounds 6 and 7 form cyclic tetramers. The fourth architecture, a dimer (compound 8), is obtained by the reaction of zinc(II) and bhnq(2-) in MeOH. In these compounds, changes of the dihedral angles and the metal-coordination mode of the bhnq(2-) ion induce the structural versatility. The assemblies of the zigzag chains of the copper(II) compounds exhibit reversible vapochromic behavior. UV/Vis, powder X-ray diffraction, EPR, and adsorption isotherm measurements indicate that this vapochromic behavior is based on the hinge-like flexibility of the bhnq(2-) ion.     

Chlorovulones,new halogenated marine prostanoids with an antitumor activity from the stolonifer clavularia viridis Quoy and Gaimard

New halogenated marine prostanoids, chlorovulone I, II and III were isolated from the stolonifer $\text{Clavularia}$$\text{viridis}$ Quoy and Gaimard. The structure elucidation and the antitumor activity of chlorovulones were described.     

Triple hydrogen bonds direct crystal engineering of metal-assembled complexes: the effect of a novel organic-inorganic module on supramolecular structure

Novel triply hydrogen bonded suprastructures based on [M(tdpd)2(L)2]2- (H2tdpd=1,4,5,6-tetrahydro-5,6-dioxo-2,3-pyrazinedicarbonitrile, L=solvent) and melamine-analogous cations have been synthesized and characterized. The use of anions containing two AAA sets from [M(tdpd)2(L)2]2- together with cations containing one DDD set (A=hydrogen-bond acceptor, D=hydrogen-bond donor) leads to the formation of complementary triply hydrogen bonded modules in the solid state. In all cases, the building module is further extended via additional hydrogen-bonding interactions to produce a tape, and tapes are assembled into sheets. These results show that a hydrogen-bonded module consisting of different kinds of building blocks, one of which is a metal complex that includes hydrogen-bond acceptor sites and the other is a hydrogen-bond donor molecule, will be attractive for constructing metal-containing supramolecular systems by the self-assembly technique.     

N-Arylation of 4-fluoro-5-trimethylsilyl-1H-pyrazole

The 1,3-dipolar cycloaddition reaction of fluoro(trimethylsilyl)acetylene prepared in situ with an excess of diazomethane smoothly proceeded to give the corresponding 4-fluoro-5-trimethylsilyl-1H-pyrazole in 84% yield. The copper iodide-catalyzed N-arylation of the fluorinated pyrazole with a variety of aryl iodides afforded N-aryl-4-fluoropyrazoles as desilylation products in good to excellent yields.     

Neutron activation analysis of low level lithium in water samples

For determining low level lithium concentrations in water, a neutron activation method based on the measurement of tritium radioactivity produced by⁶Li(n,)³H reaction has been developed. This method is specific and free from interference by other chemical elements. Using a low background liquid scintillation counter for tritium measurement, the detection limit is approximately 0.3 ppm during irradiation at a thermal neutron flux density of 1.1·10⁷n·cm^–2·s^–1 for 6 hours by a small nuclear reactor and liquid scintillation counting for 2000 minutes     

Polycyclic N-heterocyclic compounds. XLI. Synthesis of 4-substituted 6,7-dihydro-5H-pyrimido[5,4-d][1]benzazepines, 1,2,5,6-tetrahydro-4H-imidazo[1′,2′:1,6]pyrimido[5,4-d][1]benzazepines and their related compounds as a series of potential blood platelet aggregation inhibitors

As a series of polyheterocyclic compounds for exploitation as anti-platelet agents, tricyclic heterocyclic compounds, 4-substituted 6,7-dihydro-5H-pyrimido[5,4-d][1]benzazepines 3–6, 9, 12–14 , and 16–26 , having nitrogen, oxygen, or sulfur containing functional groups at the 4-position, were prepared. In addition, tetra-cyclic heterocyclic compounds, 3-methyl-1,2,5,6-tetrahydro-4H-imidazo[1′,2′:1,6]pyrimido[5,4-d][1]benzaze-pinium chloride ( 7 ), 1,2,5,6-tetrahydro-4H-imidazo[1′,2′:1,6]pyrimido[5,4-d][1]benzazepines 10a-e , 2,3,6,7-tetrahydro-1H 5H-pyrimido[1′,2′:1,6]pyrimido[5,4-d][1]benzazepine ( 11 ), and 1,2,5,6-tetrahydro-4H-thiazolo-[3′,2′:1,6]pyrimido[5,4-d][1]benzazepinium chloride ( 15 ) via ring closure of 4-(hydroxyalkylamino)- 6, 9a-e , and 3c , and 4-(2-hydroxyethylthio)-6,7-dihydro-5H-pyrimido[5,4-d][1]benzazepine ( 14 ) with phosphoryl chloride or thionyl chloride, respectively, were also prepared. Their inhibitory activities against collagen-induced aggregation of rabbit blood platelets in vitro were investigated. Among them, compound 5 having a morpholino group at the 4-position on the tricyclic nucleus, which enhanced the activity more than 14-fold as compared with aspirin, was found to have the most satisfactory in inhibitory activity.     

Assembly of Carbohydrates on a Nickel(II) Center by Utilizing N-Glycosidic Bond Formation with Tris(2-aminoethyl)amine (tren). Syntheses and Characterization of [Ni{N-(aldosyl)-tren}(H(2)O)](2+), [Ni{N,N'-bis(aldosyl)-tren}](2+) and [Ni{N,N',N"-tris(aldosyl)-tren}](2+)

Reactions of [Ni(tren)(H(2)O)(2)]X(2) (tren = tris(2-aminoethyl)amine; X = Cl (1a), Br (1b); X(2) = SO(4) (1c)) with mannose-type aldoses, having a 2,3-cis configuration (D-mannose and L-rhamnose), afforded {bis(N-aldosyl-2-aminoethyl)(2-aminoethyl)amine}nickel(II) complexes, [Ni(N,N'-(aldosyl)(2)-tren)]X(2) (aldosyl = D-mannosyl, X = Cl (2a), Br (2b), X(2) = SO(4) (2c); aldosyl = L-rhamnosyl, X(2) = SO(4) (3c)). The structure of 1c was confirmed by X-ray crystallography to be a mononuclear [Ni(II)N(4)O(2)] complex with the tren acting as a tetradentate ligand (1c.2H(2)O: orthorhombic, Pbca, a = 15.988(2) ?, b = 18.826(4) ?, c = 10.359(4) ?, V = 3118 ?(3), Z = 8, R = 0.047, and R(w) = 0.042). Complexes 2a,c and 3c were characterized by X-ray analyses to have a mononuclear octahedral Ni(II) structure ligated by a hexadentate N-glycoside ligand, bis(N-aldosyl-2-aminoethyl)(2-aminoethyl)amine (2a.CH(3)OH: orthorhombic, P2(1)2(1)2(1), a = 16.005(3) ?, b = 20.095(4) ?, c = 8.361(1) ?, V = 2689 ?(3), Z = 4, R = 0.040, and R(w) = 0.027. 2c.3CH(3)OH: orthorhombic, P2(1)2(1)2(1), a = 14.93(2) ?, b = 21.823(8) ?, c = 9.746(2) ?, V = 3176 ?(3), Z = 4, R = 0.075, and R(w) = 0.080. 3c.3CH(3)OH: orthorhombic, P2(1)2(1)2(1), a = 14.560(4) ?, b = 21.694(5) ?, c = 9.786(2) ?, V = 3091 ?(3), Z = 4, R = 0.072, and R(w) = 0.079). The sugar part of the complex involves novel intramolecular sugar-sugar hydrogen bondings around the metal center. The similar reaction with D-glucose, D-glucosamine, and D-galactosamine, having a 2,3-trans configuration, resulted in the formation of a mono(sugar) complex, [Ni(N-(aldosyl)-tren)(H(2)O)(2)]Cl(2) (aldosyl = D-glucosyl (4b), 2-amino-2-deoxy-D-glucosyl (5a), and 2-amino-2-deoxy-D-galactosyl (5b)), instead of a bis(sugar) complex. The hydrogen bondings between the sugar moieties as observed in 2 and 3 should be responsible for the assembly of two sugar molecules on the metal center. Reactions of tris(N-aldosyl-2-aminoethyl)amine with nickel(II) salts gave the tris(sugar) complexes, [Ni(N,N',N"-(aldosyl)(3)-tren)]X(2) (aldosyl = D-mannosyl, X = Cl (6a), Br (6b); L-rhamnosyl, X = Cl (7a), Br (7b); D-glucosyl, X = Cl (9); maltosyl, X = Br (10); and melibiosyl, X = Br (11)), which were assumed to have a shuttle-type C(3) symmetrical structure with Delta helical configuration for D-type aldoses on the basis of circular dichroism and (13)C NMR spectra. When tris(N-rhamnosyl)-tren was reacted with NiSO(4).6H(2)O at low temperature, a labile neutral complex, [Ni(N,N',N"-(L-rhamnosyl)(3)-tren)(SO(4))] (8), was successfully isolated and characterized by X-ray crystallography, in which three sugar moieties are anchored only at the N atom of the C-1 position (8.3CH(3)OH.H(2)O: orthorhombic, P2(1)2(1)2(1), a = 16.035(4) ?, b = 16.670(7) ?, c = 15.38(1) ?, V = 4111 ?(3), Z = 4, R = 0.084, and R(w) = 0.068). Complex 8 could be regarded as an intermediate species toward the C(3) symmetrical tris(sugar) complexes 7, and in fact, it was readily transformed to 7b by an action of BaBr(2).     

Synthesis of 3-aminopyrazolo[3,4-d]pyrimidine derivatives using N-bis(methylthio)methylene-p-toluenesulfonamide

N-Bis(methylthio)methylene-p-toluenesulfonamide ( 1 ) reacted with active methylene compounds such as malononitrile ( 2a ) and, cyanoacetamide ( 2b ) to give the corresponding 3-methylthio-3-p-toluenesulfonylami-nopropenenitrile derivatives 3a,b which were found to be convenient starting materials for the synthesis of 3,5-diaminopyrazole derivatives. Reaction of 3a and 3b with hydrazines gave the corresponding 3,5-diaminopyrazoles 4a-e , key intermediates for the synthesis of 3-aminopyrazolo[3,4-d]pyrimidine derivatives 5a-d .