Immunoaffinity screening with capillary electrochromatography

Highly efficient capillary electrochromatographic separations of cardiac glycosides and other steroids are presented. Employing butyl-derivatized silica particles as stationary phase resulted in a nearly three times faster electroosmotic flow (EOF) compared to capillary electrochromatography (CEC) with octadecyl silica particles. On-column focusing with a preconcentration factor of 180 was performed and separation efficiencies of up to 240,000 plates per meter were obtained. Using label-free standard UV absorbance, detection limits of 10-80 nM were reached for all steroids tested. For screening of cardiac glycosides, e.g., digoxin and digitoxin in mixtures of steroids, CEC was combined with immunoaffinity extraction using immobilized polyclonal anti-digoxigenin antibodies and F(ab) fragments. Simply adding small amounts of antibody carrying particles to the samples and comparing chromatograms before and after antibody addition allowed screening for high affinity antigens in mixtures with moderate numbers of compounds. Under conditions of competing antigens, affinity fingerprints of immobilized anti-digoxigenin and anti-digitoxin antibodies were obtained, reflecting the cross-reactivity of eleven steroids. The method provides high selectivity due to the combination of bioaffinity interaction with highly efficient CEC separation and UV detection at several wavelengths in parallel. This selectivity was exploited for the detection of four cardiac glycosides in submicromolar concentrations in an untreated urine sample.     

Investigation of polymer-protected noble metal nanoparticles by transmission electron microscopy: control of particle morphology and shape

 Noble metal nanoparticles were prepared by the in situ reduction of the respective metal salt precursors in the presence of various protective polymers. Transmission electron microscopy (TEM) has been used to determine the particle shapes and morphologies. These are strongly influenced by the reduction methods and conditions chosen, but the choice of the protective polymer is equally important for controlling the particle morphologies and for the stabilization of the colloids. A whole spectrum of nanoparticle morphologies and shapes was obtained, ranging from nanoagglomerates which are nevertheless well-defined and well-stabilized to nanosized single crystals with triangular shape. Received: 2 February 1998 Accepted: 29 May 1998     

Die chemie der schweren carben-analogen R2M,M = Si,Ge, Sn: IX. Eigenschaften und thermolyse von neuen 7-silabicyclo[2.2.1]heptadienen

Factors governing the ease and mechanism of 7-silabicyclo[2.2.1]heptadienes thermolysis in order to generate free silylenes and the corresponding benzene derivatives are investigated. For this purpose, 29 new compounds of the types VII–X have been prepared. No indications for a polar mechanism or an intermediate biradical could be found. The degradation is exactly of first order in all cases investigated sofar, and is enhanced by phenyl groups at the bridgehead C atoms, if a conformation coplanar with the basic ring is allowed by the neighbouring substituents, but is not enhanced by phenyl groups at the Si. The X-ray structure of two typical derivatives is discussed with this respect. A special mechanism is operating in the easy thermolysis of carbomethoxy-substituted compounds leading to cyclic sila enolether intermediates.     

Antihydrophobic cosolvent effects for alkylation reactions in water solution, particularly oxygen versus carbon alkylations of phenoxide ions

Antihydrophobic cosolvents such as ethanol increase the solubility of hydrophobic molecules in water, and they also affect the rates of reactions involving hydrophobic surfaces. In simple reactions of hydrocarbons, such as the Diels-Alder dimerization of 1,3-cyclopentadiene, the rate and solubility data directly reflect the geometry of the transition state, in which some hydrophobic surface becomes hidden. In reactions involving polar groups, such as alkylations of phenoxide ions or S(N)1 ionizations of alkyl halides, cosolvents in water can have other effects as well. However, solvation of hydrophobic surfaces is still important. By the use of structure-reactivity relationships, and comparing the effects of ethanol and DMSO as solvents, it has been possible to sort out these effects. The conclusions are reinforced by an ab initio computer model for hydrophobic solvation. The result is a sensible transition state for phenoxide ion as a nucleophile, using its oxygen n electrons to avoid loss of conjugation. The geometry of alkylation of aniline is very different, involving packing (stacking) of the aniline ring onto the phenyl ring of a benzyl group in the benzylation reaction. The alkylation of phenoxide ions by benzylic chlorides can occur both at the phenoxide oxygen and on ortho and para positions of the ring. Carbon alkylation occurs in water, but not in nonpolar organic solvents, and it is observed only when the phenoxide has at least one methyl substituent ortho, meta, or para. The effects of phenol substituents and of antihydrophobic cosolvents on the rates of the competing alkylation processes indicate that in water the carbon alkylation involves a transition state with hydrophobic packing of the benzyl group onto the phenol ring. The results also support our conclusion that oxygen alkylation uses the n electrons of the phenoxide oxygen as the nucleophile and does not have hydrophobic overlap in the transition state. The mechanisms and explanations for competing oxygen and carbon alkylations differ from previous proposals by others.     

Electrochemical synthesis and characterization of conducting polymers in supercritical carbon dioxide

This contribution reports the first synthesis of conducting polymers (CPs), specifically, polyaniline (PAn) and polypyrrole (PPy), in supercritical carbon dioxide (scCO2). CPs synthesized electrochemically in scCO2 were characterized with cyclic voltammetry (CV), four-point probe conductivity, scanning electron microscopy (SEM), and UV-vis spectroscopy. Preliminary data indicate that CPs synthesized by this method exhibit novel morphology and high conductivity comparable to that synthesized by traditional methods.     

Electron Impact Induced Fragmentation of Aromatic Alkoxyimines II [5]. Formation and Transformation of Heterocyclic Radical Cations in the Gas Phasea

 The molecular ion 1 of N-(n-propoxy)benzaldimine I rearranges by an 1,5-H-shift to the δ-distonic ion 2 which subsequently cyclizes to the α-distonic ion 3. Homolytic cleavage of the N–O bond in 3 results in the δ-distonic ion 4 which expels CH₂O leading to the β-distonic ion 5. Ion 5 is also formed from the molecular ions of tetrahydrooxazines II and III and from M^+• of phenylazetidine IVa. In a subsequent step, ion 5 cyclizes to the N-protonated 3,4-dihydroisoquinolinium ion 6. The syntheses of II–IV and their derivatives are described.     

MPW1K Performs Much Better than B3LYP in DFT Calculations on Reactions that Proceed by Proton-Coupled Electron Transfer (PCET)

DFT calculations have been performed with the B3LYP and MPW1K functional on the hydrogen atom abstraction reactions of ethenoxyl with ethenol and of phenoxyl with both phenol and alpha-naphthol. Comparison with the results of G3 calculations shows that B3LYP seriously underestimates the barrier heights for the reaction of ethenoxyl with ethenol by both proton-coupled electron transfer (PCET) and hydrogen atom transfer (HAT) mechanisms. The MPW1K functional also underestimates the barrier heights, but by much less than B3LYP. Similarly, comparison with the results of experiments on the reaction of phenoxyl radical with alpha-naphthol indicates that the barrier height for the preferred PCET mechanism is calculated more accurately by MPW1K than by B3LYP. These findings indicate that the MPW1K functional is much better suited than B3LYP for calculations on hydrogen abstraction reactions by both HAT and PCET mechanisms.     

Electron impact induced fragmentation of aromatic N-alkoxy-imines I. Ring closure in (M-CH2O)+• ions by intramolecular aromatic substitution

Summary N-Butoxy- and N-propoxy-imines derived fromo-,m-, andp-substituted benzaldehydes (X = F, Cl, Br, I) decompose upon electron impact to the respective aldoximes by loss of C _n H_2n and competitivelyvia 1,5-distonic radical cations by loss of CH₂O to 1,3-distonic ions which eliminate H and/or a halogen atom in the course of homolytic aromatic substitution, giving rise to cyclic (M-CH₂O-H)⁺ or (M-CH₂O-X )⁺ ions.Dedicated with warm regards to Prof. Dr.D. Seebach, Zürich, on the occasion of his 60^th birthday     

Ultrafast proton-coupled electron-transfer dynamics in pyrene-modified pyrimidine nucleosides: model studies towards an understanding of reductive electron transport in DNA.

5-(Pyren-1-yl)-2'-deoxyuridine (PydU) and 5-(Pyren-1-yl)-2'-deoxycytidine (PydC) were used as model nucleosides for DNA-mediated reductive electron transport (ET) in steady-state fluorescence and femtosecond time-resolved transient absorption spectroscopy studies. Excitation of the pyrene moiety in PydU and PydC leads to an intramolecular electron transfer that yields the pyrenyl radical cation and the corresponding pyrimidine radical anion (dU.- and dC.-. By comparing the excited state dynamics of PydC and PydU, we derived information about the energy difference between the two pyrimidine radical anion states. To determine the influence of protonation on the rates of photoinduced intramolecular ET, the spectroscopic investigations were performed in acetonitrile, MeCN, and in water at different pH values. The results show a significant difference in the basicity of the generated pyrimidine radical anions and imply an involvement of proton transfer during electron hopping in DNA. Our studies revealed that the radical anion dC.- is being protonated even in basic aqueous solution on a picosecond time scale (or faster). These results suggest that protonation of dC.- may also occur in DNA. In contrast, efficient ET in PydU could only be observed at low pH values (< 5). In conclusion, we propose--based on the free energy differences and the different basicities--that only dT.- but not dC.- can participate as an intermediate charge carrier for excess electron migration in DNA.     

Polyhedral members of the Mg2nP2m family derived from dimeric magnesium trialkylsilylphosphandiide

The magnesiation of tri(tert-butyl)silylphosphane in THF yields tetrameric (tetrahydrofuran-O)magnesium tri(tert-butyl)silylphosphandiide 1. The central moiety is a slightly distorted Mg4P4 cube with tetracoordinate magnesium and phosphorus atoms. The reaction of dibutylmagnesium with H2PSitBu3 in toluene gives tetramagnesium tetrakis[mu-tri(tert-butyl)silylphosphanide] bis[mu 4-tri(tert-butyl)silylphosphandiide] 2. The central fragment is a Mg4P2 octahedron with the phosphorus atoms in a trans position. The Mg...Mg edges are bridged by the phosphanide substituents. Crystallographic data of 1: C68H148Mg4O5P4Si4, monoclinic, P2(1)/c, a = 13.454(1) A, b = 26.123(1) A, c = 24.539(2) A, beta = 96.53(1) degrees, Z = 4; crystallographic data of 2: C72H166Mg4P6Si6, monoclinic, P2(1)/n, a = 13.951(1) A, b = 14.269(1) A, c = 24.209(2) A, beta = 102.415(1) degrees, Z = 2.