Complete selection of a self-assembling homo- or hetero-cavitand cage via metal coordination based on ligand tuning

Selective formation of a homo- or hetero-cavitand cage via metal-coordination, by using tetra(4-pyridyl)-cavitand (1), tetrakis(4-pyridylethynyl)-cavitand (2), or tetrakis(4-cyanophenyl)-cavitand (3) as deep cavitand ligands and Pd(dppp)(OTf)2 (4) as a connector, has been investigated by 1H NMR and CSI-MS. When the cavitand and 4 were mixed in CDCl3 in a 2:4 molar ratio, 1 gave a complicated mixture, whereas 2 or 3 formed a homo-cavitand cage {2(2).4[Pd(dppp)]}8+.8(TfO-) (5) or {2(3).4[Pd(dppp)]}8+.8(TfO-) (6), respectively, as a single species. In a 1:1:4 mixture of 2, 3, and 4, homo-cavitand cages 5 and 6 were observed in a 1:1 ratio. In marked contrast, a mixture of 1, 3, and 4 in a 1:1:4 ratio was exclusively self-assembled into a hetero-cavitand cage {1.3.4[Pd(dppp)]}8+.8(TfO-) (7). The selectivity for the self-assembly of the homo- or hetero-cavitand cage via metal coordination would arise from a combination of factors such as coordination ability and steric demand of cavitand ligands.     

Aqueous Titanate Sols from Ti Alkoxide-α-Hydroxycarboxylic Acid System and Preparation of Titania Films from the Sols

Aqueous titanate sols were prepared by reactions of titanium tetraisopropoxide (TIP) with -hydroxycarboxylic acids in water. IR and Raman spectra, and elemental analyses of the precipitates obtained from the sols revealed that the carboxylates were chelated to titanium but the Ti species were polymerized to form a cluster that had a colloidal nature. Spin-coating of titania (TiO₂) thin films from these sols was also examined. Interestingly, it was found that (004) preferentially oriented anatase films with refractive index of 2.54 were obtained from TIP-lactic acid-NH₃ (1:1:1, molar ratio) aqueous sol. This crystallographic orientation was characteristic of the TIP-lactic acid-NH₃ (1:1:1) system, and was not affected by the kinds of substrates used and the heating rate of the film. TEM observation indicated that small anatase grains had already formed at 200°C. Therefore, the crystallographic orientation might depend strongly on the structure of the chemical species of the precursor solutions.     

Asymmetric sequential Michael reaction: Synthesis of optically active bicyclo[2.2.2]octane derivatives

The sequential Michael reaction of (S)-4,5-di-O-isopropylidenepent-2- enoate and with lithium enolate afforded diastereo- and enantioselectively bicyclo[2.2.2]octane and (or ), respectively. The adducts were efficiently converted into both enantiomeric keto aldehydes (−)- and (+)- .     

(2,7-Disubstituted-1,8-biphenylenedioxy)bis(dimethylaluminum) as bidentate organoaluminum Lewis acids: elucidation and synthetic Utility of the double electrophilic activation phenomenon

A series of (2,7-disubstituted-1,8-biphenylenedioxy)bis(dimethylaluminum) (2) has been readily prepared in situ by treatment of the requisite 2,7-disubstituted-1,8-biphenylenediol (1) with Me3Al (2 equiv) in CH2Cl2 at room temperature; this primarily relies on the successful establishment of a new synthetic procedure of 1 starting from inexpensive m-anisidine. Evaluation of 2 as a bidentate organoaluminum Lewis acid has been performed by the reduction of ketonic substrates using Bu3SnH as a hydride source in comparison to the conventional monodentate Lewis acid dimethylaluminum 2,6-xylenoxide (11), uncovering the significantly high activation ability of 2 toward carbonyl. Particularly, (2,7-dimethyl-1,8-biphenylenedioxy)bis(dimethylaluminum) (2a) exerted the highest reactivity, which has also been emphasized in the Mukaiyama aldol reaction. The structure of the bidentate Lewis acid 2 was unambiguously determined by single-crystal X-ray diffraction analysis of 2g possessing a bulky 3,5-di-tert-butylphenyl substituent, revealing the rigid dimeric assembly in the solid state. The double electrophilic activation of carbonyl substrate by 2a has been supported by low-temperature 13C NMR analysis as well as theoretical study using the Gaussian 98 program. Moreover, unique stereoselectivity has been observed in the 2a-promoted Mukaiyama Michael addition, and highly chemoselective functionalization of carbonyl compounds in the presence of their acetal counterparts has been realized using 2a. Finally, the effectiveness of 2a for the activation of ether functionality has been demonstrated in the Claisen rearrangement of allyl vinyl ethers.     

Crystal violet combined with Merocyanine 540 for the ex vivo purging of hematopoietic stem cell grafts

The purpose of this study was to determine in a preclinical purging model, how effective crystal violet-mediated photodynamic therapy (CV-PDT) is against solid tumor and drug-resistant mutant tumor cells, and if certain limitations of CV-PDT can be overcome by using crystal violet (CV) in combination with the membrane-active photosensitizer, Merocyanine 540 (MC540). When used under conditions that preserved an adequate fraction of normal human granulocyte/macrophage progenitors (CFU-GM), CV-PDT failed to achieve meaningful reductions of DU145 prostate, H69 small cell lung cancer, and MDA-MB-435S breast cancer cells. Melphalan-resistant L1210/L-PAM1, adriamycin-resistant P388/ADR, and adriamycin-resistant HL-60/ADR leukemia cells were markedly less sensitive to CV-PDT than their wild-type counterparts, whereas cisplatin-resistant H69/CDDP cells were more sensitive than wild-type H69 cells. Sequential exposure to MC540- and CV-PDT under conditions that preserved an adequate fraction (73% and 29%, respectively) of normal CD34-positive hematopoietic stem cells and granulocyte/macrophage progenitors was highly effective against H69 (99.997% reduction) and H69/CDDP (99.999% reduction) cells, but ineffective against HL-60/ADR, MDA-MB-435S, and DU145 cells. CV thus shows only limited promise as a single-modality purging agent. However, in certain situations, clinically meaningful tumor cell depletions can be obtained by using CV in combination with a second photosensitizer such as MC540.     

Separation and simultaneous determination of cobalt, nickel and copper with 2-(4-methyl-2-quinolylazo)-5-diethylaminophenol by reversed-phase high-performance liquid chromatography

Performance of six quinolylazo compounds was studied as a pre-column derivatizing reagent for the separation of metal ions in the reversed-phase high-performance liquid chromatography. 2-(4-Methyl-2-quinolylazo)-5-diethylaminophenol (QADP) was suited for the determination of Co, Ni and Cu in the presence of a large amount of Fe. The detection limits under the optimized conditions [stationary phase: L-column ODS; mobile phase: acetone-water (62:38, v/v) containing 0.01 M NH(4)SCN and 0.01 M 2-morpholinoethanesulfonic acid-NaOH (pH 6); injection volume: 10 mul] were 0.24 ng for Co, 0.22 for Ni and 0.53 for Cu. This method was successfully applied to the determination of these metal ions in a standard steel sample.     

Synthesis, structure and thermal stability of fully hydrophobic porphyrin-DNA conjugates

The DNAs modified with tetraphenyl porphyrin at the center of 13mer oligonucleotide were synthesized using phosphoramidite chemistry and automated DNA synthesis. When the porphyrin modified oligonucleotide was annealed with its complementary strand, they formed a standard B-form duplex. The porphyrin moiety intercalated in the duplex, and moderately lowered the thermal stability.     

Analysis of NAD(P) and NAD(P)H cofactors by means of imprinted polymers associated with Au surfaces:: A surface plasmon resonance study

Crosslinked films consisting of the acrylamide-acrylamidophenylboronic acid copolymer that are imprinted with recognition sites for β-nicotinamide adenine dinucleotide (NAD⁺), β-nicotinamide adenine dinucleotide phosphate NADP⁺, and their reduced forms (NAD(P)H), are assembled on Au-coated glass supports. The binding of the oxidized cofactors NAD⁺ or NADP⁺ or the reduced cofactors NADH or NADPH to the respective imprinted sites results in the swelling of the polymer films through the uptake of water. Surface plasmon resonance (SPR) spectroscopy is employed to follow the binding of the different cofactors to the respective imprinted sites. The imprinted recognition sites reveal selectivity towards the association of the imprinted cofactors. The method enables the analysis of the NAD(P)⁺ and NAD(P)H cofactors in the concentration range of 1×10⁻⁶ to 1×10⁻³ M. The cofactor-imprinted films associated with the Au-coated glass supports act as active interfaces for the characterization of biocatalyzed transformations that involve the cofactor-dependent enzymes. This is exemplified with the characterization of the biocatalyzed oxidation of lactate to pyruvate in the presence of NAD⁺ and lactate dehydrogenase using the NADH-imprinted polymer film.     

Structural and mechanistic studies on ion insertion into the molecular box {[CpCo(CN)3]4[Cp*Ru]4}

The molecular box [CpCo(CN)₃]₄[Cp*Ru]₄ (Co₄Ru₄) reacts readily with a variety of monocations to form M⊂Co₄Ru₄⁺ (M=K⁺, Cs⁺, Rb⁺). Ion competition experiments, monitored by ESI-MS, show that the molecular box binds the smaller K⁺ more rapidly than Cs⁺, but that thermodynamically Co₄Ru₄ prefers the larger ion. The rates of ion-insertion for K⁺ and Cs⁺ into Co₄Ru₄ were found to qualitatively follow second order kinetics with K⁺, 300 M⁻¹ s⁻¹ and Cs⁺, 36 M⁻¹ s⁻¹. The ratio k_K/k_Cs qualitatively matched the ESI-MS results from ion competition experiments. The rates of ion-insertion into Co₄Ru₄ were found to depend on the counter anions. In particular, RbBF₄ reacted with Co₄Ru₄ more slowly than did RbOTf. The slower rates allowed us to establish second order kinetics. ¹H NMR studies reveal that the Cp signal for Co₄Ru₄ is very sensitive to the presence of entering ions, e.g., Rb⁺, whereas the corresponding Cp signal for Rb⊂Co₄Ru₄⁺ was insensitive to the presence of Rb⁺. The molecular structures of [Co₄Ru₄] · 6MeCN, [K⊂Co₄Ru₄]BF₄ · 7MeCN, [Cs⊂Co₄Ru₄]BF₄ · 6MeCN and [Tl⊂Co₄Ru₄]BF₄ · 6MeCN, determined by X-ray diffraction, showed that although the compounds crystallized in the same space group I23, a correlation exists between the Ru-N/Co-C bond distances and the size of the interstitial ion.     

On-line measurement of intramolecular carbon isotope distribution of acetic acid by continuous-flow isotope ratio mass spectrometry

Molecular and intramolecular carbon isotope measurements of acetic acid present in natural environments have been performed by off-line procedures. The off-line method is complicated and time-consuming and requires micromolar to millimolar amounts of sample. This limits geochemical isotopic studies, especially at the intramolecular level, on acetic acid present in natural samples. Here, we examine an on-line measurement of intramolecular carbon isotope distribution of acetic acid using continuous-flow isotope ratio mass spectrometry (CF-IRMS) coupled with an on-line pyrolysis system. This is achieved by measurement of the respective carbon isotope ratios of CH4 and CO2 produced by on-line pyrolysis of acetic acid. Results for authentic standards of pure acetic acid demonstrated the practicality of this on-line method, although the carbon isotope ratio of the methyl group could not be determined directly. The precision of the carbon isotope measurements was 0.4 per thousand (1sigma). The carbon isotope distribution determined by the on-line method was identical to that determined by the conventional off-line method within analytical error. The advantages of the on-line method compared with the conventional off-line method are that it is less laborious, requires less analytical time (less than one hour per sample) and, most importantly, uses smaller sample sizes (ca. 10 nanomole). An application of this on-line method to natural geochemical samples will provide an insight into the geochemical cycle of acetic acid.