Water-soluble porphyrin detection in a pure-silica photonic crystal fiber

Aqueous solutions of the water-soluble porphyrin 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrinatomanganese(III) acetate were inserted into the holes of a photonic crystal fiber, and the porphyrin absorption bands were identified. Results were obtained for three concentrations. The porphyrins in water show no surface interactions with the silica walls of the capillary channels. We discuss the implications for future hybrid electronic and photonic fiber devices.     

Combined X‐ray diffraction and alpha particle X‐ray spectrometer analysis of geologic materials

The shallow interrogation depth of the lightest elements (Na, Mg, Al, and Si) detected by the particle‐induced X‐ray emission branch of the Curiosity Rover's alpha particle X‐ray spectrometer suggests that the X‐rays of these elements very likely emerge from a single mineral grain. This reality violates the assumption of atomic homogeneity at the micron scale made in both existing spectrum‐reduction approaches for the alpha particle X‐ray spectrometer. Consequently, analytical results for these elements in igneous geochemical reference materials exhibit deviations from certified concentrations in a manner that can be related to the total alkali‐silica diagram. A computer code is introduced here to provide quantitative prediction of these deviations using the mineral abundances determined from X‐ray diffraction. The latter are converted to area coverage fractions to represent the sample surface, and a fundamental parameters computation predicts the elemental X‐ray yields from each mineral and sums these. In this process, the chemistry of each individual mineral has to be varied by an iterative simplex approach; X‐ray yields are computed and compared with the peak areas from the fit of the bulk sample. When the difference between mineral yields and peak areas for each element are minimized, the mineral formulae are set and elemental X‐ray yields provided. The ratio between the summed mineral X‐ray yields and the corresponding yields based on the homogeneity assumption may then be compared directly with the concentration deviations measured in our earlier work. For several rock types, good agreement is found, thereby consolidating our understanding of the effects of sample mineralogy on alpha particle X‐ray spectrometer results. Copyright © 2017 John Wiley & Sons, Ltd.     

Mesoporous carbon amperometric glucose sensors using inexpensive,commercial methacrylate-based binders

Two ordered, soft-templated mesoporous carbon powders with cubic and hexagonal framework structure and four different commercial, low cost methacrylate-based polymer binders with widely varying physical properties are investigated as screen printed electrodes for glucose sensors using glucose oxidase and ferricyanide as the mediator. Both the chemistry and concentration of the binder in the electrode formulation can significantly impact the performance. Poly(hydroxybutyl methacrylate) as the binder provides hydrophilicity to enable transport of species in the aqueous phase to the carbon surface, but yet is sufficiently hydrophobic to provide mechanical robustness to the sensor. The current from the mesoporous carbon electrodes can be more than an order of magnitude greater than for a commercial printed carbon electrode (Zensor) with improved sensitivity for model glucose solutions. Even when applying these sensors to rabbit whole blood, the performance of these glucose sensors compares favorably to a standard commercial glucose meter with the lower detection limit of the mesoporous electrode being approximately 20 mg dL⁻¹ despite the lack of a separation membrane to prevent non-specific events; these results suggest that the small pore sizes and high surface areas associated with ordered mesoporous carbons may effectively decrease some non-specific inferences for electrochemical sensing.     

On spacelike submanifolds with parallel mean curvature in an indefinite space form

In this work we use a Simon??s type inequality for a suitable tensor and apply it to obtain sharp estimates for the supremum of the scalar curvature for complete spacelike submanifold M ⁿ with parallel mean curvature vector in an indefinite space form ${N^{n+p}_p(c)}$ .     

Cu(II)-promoted methanolysis of N,N-dipicolylacetamide. multistep activation by decoupling of > ̈̈N-C═O resonance via Cu(II)-N binding, delivery of the Cu(II):((-)OCH3) nucleophile, and metal ion assistance of the departure of the leaving group

The methanolysis of the Cu(II) complex of N-acetyl-N,N-bis(2-picolyl)amine (2) was investigated by a kinetic study as a function of pH in methanol at 25 °C and computationally by DFT calculations. The active species is the basic form of the complex (3(-)), or (1:Cu(II))((-)OCH(3))(HOCH(3))), and the rate constant for its solvolysis is k(max) = 1.5 × 10(-4) s(-1). The mechanism involves Cu(II) binding to the amide N lone pair, decoupling it from >N-C═O resonance, concomitant with Cu(II):((-)OCH(3)) delivery to the adjacent >N-C═O unit, followed by Cu(II)-assisted departure of the N,N-bis(2-picolyl)amide from a tetrahedral intermediate.     

Rapid determination of actinides in emergency food samples

A new rapid method for the determination of actinides in food samples has been developed at the Savannah River Site Environmental Lab (Aiken, SC, USA) that can be used for emergency response or routine food samples. If a radiological dispersive device or improvised nuclear device event occurs, there will be a urgent need for rapid analyzes of many different environmental matrices, as well as food samples, to support dose mitigation and protect general populations from radioactivity that may enter the food chain. The recent accident at Fukushima nuclear power plant in March, 2011 reinforces the need to have rapid analyzes for radionuclides in environmental and food samples. The new method to determine actinides in food samples utilizes a furnace ashing step, a rapid sodium hydroxide fusion method, a lanthanum fluoride matrix removal step, and a column separation process with stacked TEVA, TRU, and DGA resin cartridges. The furnace ashing and rapid fusion steps are performed in relatively inexpensive, reusable zirconium crucibles. Alpha emitters are prepared using rare earth micro precipitation for counting by alpha spectrometry. The method showed high chemical recoveries and effective removal of interferences. The determination of actinides in food samples can be performed in less than 8 h for 10 g samples with excellent quality for emergency samples using short count times. Larger food samples (100 g) may be processed in 24 h or less. The rapid fusion technique is a rugged sample digestion method that ensures that any refractory actinide particles are effectively digested. This method can be used to meet the derived intervention level guidelines recommended by the U.S. Food and Drug Administrations.     

Cu3V2O7(OH)2·2H2O纳米线的制备及光吸收性能

以CuSO4·5H2O和 NH4VO3为原料,采用水热法制备了Cu3V2O7(OH)2·2H2O纳米线.采用X射线衍射(XRD)和场发射扫描电子显微镜(FE-SEM)对样品的组成和表面形貌进行了表征,结果显示:Cu3V2O7(OH)2·2H2O纳米线直径约80 nm,长度达到几个微米.对纳米线形成机理研究表明:该纳米线的形成主要取决于反应温度和反应体系pH值等因素.紫外-可见光吸收测试显示Cu3V2O7(OH)2·2H2O纳米线具有较宽的紫外-可见光吸收范围,计算其带隙宽度为1.94 eV.     

载Ag二氧化钛纳米线的制备及其光催化性能

利用水热合成法,制备出了二氧化钛纳米线,通过葡萄糖还原Ag(NH3)+2,在制备出的二氧化钛纳米线表面负载了 Ag纳米颗粒.利用透射电镜(TEM)、高分辨透射电镜(HRTEM)、X射线光电子能谱(XPS)和紫外-可见光谱(UV-Vis)对产物进行了表征.结果表明:该Ag/TiO2纳米线在可见光区域表现出较强的吸收性能.测试了样品降解酸性红3R溶液的活性.结果表明,TiO2纳米线表面负载Ag纳米颗粒对提高其光催化性能具有积极的作用.