Bridged ring systems—VIII A novel ring expansion reaction

Acid treatment of 2-(β-Benzoylethyl)-cyclopentanone (III) leads directly to a phenylcycloheptene carboxylic acid (VII) and the related lactone (XI), via a bicyclic intermediate.     

一种新型无冲突访问存贮系统的分析

本文叙述了一种新型存贮系统的特点,分析了交叉访问存贮系统无冲突成组访问的过程,讨论了影响存贮器带宽和访问速度的因素。计算确定了AP-601计算机存贮器所采用的素数模块的个数,导出了地址变换公式并设计了相应的逻辑网络。     

Buffer-gas cooling of NH via the beam loaded buffer-gas method

NH radicals from a molecular beam are cooled using a novel beam-loaded buffer gas method. The radicals are produced in a glow discharge beam source and injected into cryogenic helium gas. Up to 10¹² molecules in their ground electronic, vibrational, and rotational state are detected in the buffer gas and translational temperatures under 6 K are achieved. The cooling method presented is general and can be applied to any molecules in a molecular beam.Received: 20 July 2004, Published online: 26 October 2004PACS: 33.80.Ps Optical cooling of molecules; trapping - 34.50.Ez Rotational and vibrational energy transfer - 39.10. + j Atomic and molecular beam sources and techniquesB. Friedrich: Present address: Department of Molecular Physics, Fritz-Haber-Institut der Max-Planck-Gesellschaft, Berlin, Germany.     

Rapid separation method for emergency water and urine samples

The Savannah River Site Environmental Bioassay Lab participated in the 2008 NRIP Emergency Response program administered by the National Institute for Standards and Technology (NIST) in May, 2008. A new rapid column separation method was used for analysis of actinides and ⁹⁰Sr in the NRIP 2008 emergency water and urine samples. Significant method improvements were applied to reduce analytical times. As a result, much faster analysis times were achieved, less than 3 hours for determination of ⁹⁰Sr and 3–4 hours for actinides. This represents a 25%–33% improvement in analysis times from NRIP 2007 and a ∼100% improvement compared to NRIP 2006 report times. Column flow rates were increased by a factor of two, with no significant adverse impact on the method performance. Larger sample aliquots, shorter count times, faster cerium fluoride microprecipitation and streamlined calcium phosphate precipitation were also employed. Based on initial feedback from NIST, the SRS Environmental Bioassay Lab had the most rapid analysis times for actinides and ⁹⁰Sr analyses for NRIP 2008 emergency urine samples. High levels of potential matrix interferences may be present in emergency samples and rugged methods are essential. Extremely high levels of ²¹⁰Po were found to have an adverse effect on the uranium results for the NRIP-08 urine samples, while uranium results for NRIP-08 water samples were not affected. This problem, which was not observed for NRIP-06 or NRIP-07 urine samples, was resolved by using an enhanced ²¹⁰Po removal step, which will be described.     

Synthesis and characterization of novel PDMS nanocomposites using POSS derivatives as cross‐linking filler

We report the synthesis and characterization of novel elastomeric nanocomposites containing polyhedral oligomeric silsesquioxanes (POSS) as both the cross‐linker and filler within a polydimethylsiloxane (PDMS) polymer matrix. These polymer composites were prepared through the reaction of octasilane‐POSS (OS‐POSS) with vinyl‐terminated PDMS chains using hydrosilylation chemistry. In addition, larger super‐POSS cross‐linkers, consisting of two pendant hepta(isobutyl)POSS molecules attached to a central octasilane‐POSS core, were also used in the fabrication of the PDMS composites. The chemical incorporation of these POSS cross‐linkers into the PDMS network was verified by solid‐state ¹H magic angle spinning NMR. Based on dynamic mechanical analysis, the PDMS nanocomposites prepared with the octafunctional OS‐POSS cross‐linker exhibited enhanced mechanical properties relative to polymer systems prepared with the tetrafunctional TDSS cross‐linker at equivalent loading levels. The observed improvements in mechanical properties can be attributed to the increased dimensionality of the POSS cross‐linker. The PDMS elastomers synthesized from the larger super‐POSS molecule showed improved mechanical properties relative to both the TDSS and OS‐POSS composites due to the increased volume‐fraction of POSS filler in the polymer matrix. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2589–2596, 2009     

The structure of events triggered by direct photons in π− p, π+ p andpp collisions at 280 GeV/c

The structure of events associated with the production of direct photons in π^? p, π⁺ p andpp reactions of 280 GeV/c has been studied using data from the WA 70 experiment at the CERN SPS. Results are presented on the distributions of the fractional momenta of the colliding partons and on the fragmentation of the recoil jet and a comparison is made with predictions using the structure functions of Duke and Owens in the Lund Monte Carlo with string fragmentation.     

Effect of boundary layer losses on 2D detonation cellular structures

We evaluate the effect of boundary layer losses on two-dimensional H2/O2/Ar cellular detonations obtained in narrow channels. The experiments provide the details of the cellular structure and the detonation speed deficits from the ideal CJ speed. We model the effect of the boundary layer losses by incorporating the flow divergence in the third dimension due to the negative boundary layer displacement thickness, modeled using Mirels’ theory. The cellular structures obtained numerically with the resulting quasi-2D formulation of the reactive Euler equations with two-step chain-branching chemistry are found in excellent agreement with experiment, both in terms of cell dynamics and velocity deficits, provided the boundary layer constant of Mirels is modified by a factor of 2. A significant increase in the cell size is found with increasing velocity deficit. This is found to be very well captured by the induction zone increase in slower detonations due to the lower temperatures in the induction zone.     

Interaction of surfactants with hydrophobic surfaces in nanopores

Surfactant-induced wetting of hydrophobic nanopores is investigated. SDS micelles interact with the C18 layer on the nanopore walls with their hydrophobic tails, creating a charged wall lining with their head groups and inducing a breakthrough of the aqueous solution to wet the pores. The surface coverage of the surfactant molecules is evaluated electrophoretically. A surprising discovery is that pore wetting is achieved with 0.73 μmol/m(2) coverage of SDS surfactant, corresponding to only 18% of a monolayer on the walls of the nanopores. Clearly, the surfactant molecules cannot organize as a compact uninterrupted monolayer. Instead, formation of hemimicelles is thermodynamically favored. Modeling shows that, to be consistent with the experimental observations, the aggregation number of hemimicelles is lower than 25 and the size of hemimicelle is limited to a maximum radius of 11.7 ?. The hydrophobic tails of SDS thus penetrate into and intercalate with the C18 layer. The insight gained in the C18-surfactant interactions is essential in the surfactant-induced solubilization of hydrophobic nanoporous particles. The results have bearing on the understanding of the nature of hydrophobic interactions.