Generation of hard X-ray radiation using the triboelectric effect by peeling adhesive tape

The triboelectric effect describes electrical charging when bringing different materials into contact. We report on the generation of hard X-ray radiation by peeling various adhesive tapes under medium vacuum conditions. Beside vacuum housing and pumps as instrumentation only an electric motor, two rolls and a metal foil as target material are necessary. The spectral distribution of generated X-rays was analyzed using an energy-dispersive detector. Depending on peeling speed, pressure and choice of material combination, electrons with energies sufficient to excite emission in the hard X-ray region are produced. The results are discussed in terms of triboelectric separation of charge carriers.     

Physical mechanisms responsible for the water-induced degradation of PC61BM P3HT photovoltaic thin films

We show that [6,6]-phenyl-C61-butyric acid methyl ester (PC₆₁BM) at the surface of thin film blends of poly(3-hexylthiophene) (P3HT):PC₆₁BM can be patterned by water. Using a series of heating and cooling steps, water droplets condense onto the blend film surface. This is possible due to the liquid-like, water swollen layer of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate. Breath pattern water deformation and subsequent drying on the film surface results in isolated PC₆₁BM structures, showing that migration of PC₆₁BM takes place. This was confirmed by selective wavelength illumination to spatially map the photoluminescence from the P3HT and PC₆₁BM. Within a device, redistribution of the surface PC₆₁BM into aggregates would be catastrophic, as it would markedly alter device performance. We also postulate that repeated volume change of the poly(3,4-ethylenedioxythiophene) polystyrene sulfonate layer by water swelling may be, in part, responsible for the delamination failure mechanism in thin film solar cells devices. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 141–146     

Electronic modification of an aminotroponiminate zinc complex leading to an increased reactivity in the hydroamination of alkenes

The electronically modified zinc complex 5-phenylsulfanyl-N-isopropyl-2-(isopropylamino)troponiminate zinc methyl, [(PhS-ATI(iPr)2)ZnMe], was synthesized. It showed an increased reactivity in the intramolecular hydroamination reaction of non-activated alkenes compared to a previously-reported, non-substituted complex.     

Anion Storage Chemistry of Organic Cathodes for High-Energy and High-Power Density Divalent Metal Batteries

Multivalent batteries show promising prospects for next-generation sustainable energy storage applications. Herein, we report a polytriphenylamine (PTPAn) composite cathode capable of highly reversible storage of tetrakis(hexafluoroisopropyloxy) borate [B(hfip)₄] anions in both Magnesium (Mg) and calcium (Ca) battery systems. Spectroscopic and computational studies reveal the redox reaction mechanism of the PTPAn cathode material. The Mg and Ca cells exhibit a cell voltage >3 V, a high-power density of ∼∼3000 W kg⁻¹ and a high-energy density of ∼∼300 Wh kg⁻¹, respectively. Moreover, the combination of the PTPAn cathode with a calcium-tin (Ca−Sn) alloy anode could enable a long battery-life of 3000 cycles with a capacity retention of 60 %. The anion storage chemistry associated with dual-ion electrochemical concept demonstrates a new feasible pathway towards high-performance divalent ion batteries.     

Catalytic Alkyne Semihydrogenation with Polyhydride Ni/Ga Clusters

The bimetallic, decanuclear Ni₃Ga₇-cluster of the formula [Ni₃(GaTMP)₃(μ²-GaTMP)₃(μ³-GaTMP)] ( 1 , TMP=2,2,6,6-tetramethylpiperidinyl) reacts reversibly with dihydrogen under the formation of a series of (poly-)hydride clusters 2 . Low-temperature 2D NMR experiments at −80 °C show that 2 consist of a mixture of a di- ( 2_Di ), tetra- ( 2_Tetra ) and hexahydride species ( 2_Hexa ). The structures of 2_Di and 2_Tetra are assessed by a combination of 2D NMR spectroscopy and DFT calculations. The cooperation of both metals is essential for the high hydrogen uptake of the cluster. Polyhydrides 2 are catalytically active in the semihydrogenation of 4-octyne to 4-octene with good selectivity. The example is the first of its kind and conceptually relates properties of molecular, atom-precise transition metal/main group metal clusters to the respective solid-state phase in catalysis.     

Pyridyl‐Endcapped Polyynes: Stabilized Wire‐like Molecules

A 4‐ethynylpyridyl derivative with sterically shielding phenyl groups in the 3‐ and 5‐positions has been synthesized and used to terminate a series of polyynes. This approach allows for the synthesis of stable polyynes up to an octayne, twice as long as previous accessible for “unstabilized” pyridyl‐endcapped polyynes. The potential of these polyynes as wire‐like linkers to metal centers is demonstrated by axial coordination of pyridyl groups to zinc‐ and ruthenium‐metalloporphyrins.     

Double-bridge bonding of aluminium and hydrogen in the crystal structure of gamma-AlH3

Aluminum trihydride (alane) is one of the most promising among the prospective solid hydrogen-storage materials, with a high gravimetric and volumetric density of hydrogen. In the present work, the alane, crystallizing in the gamma-AlH3 polymorphic modification, was synthesized and then structurally characterized by means of synchrotron X-ray powder diffraction. This study revealed that gamma-AlH3 crystallizes with an orthorhombic unit cell (space group Pnnm, a = 5.3806(1) A, b = 7.3555(2) A, c = 5.77509(5) A). The crystal structure of gamma-AlH3 contains two types of AlH6 octahedra as the building blocks. The Al-H bond distances in the structure vary in the range of 1.66-1.79 A. A prominent feature of the crystal structure is the formation of the bifurcated double-bridge bonds, Al-2H-Al, in addition to the normal bridge bonds, Al-H-Al. This former feature has not been previously reported for Al-containing hydrides so far. The geometry of the double-bridge bond shows formation of short Al-Al (2.606 A) and Al-H (1.68-1.70 A) bonds compared to the Al-Al distances in Al metal (2.86 A) and Al-H distances for Al atoms involved in the formation of normal bridge bonds (1.769-1.784 A). The crystal structure of gamma-AlH3 contains large cavities between the AlH6 octahedra. As a consequence, the density is 11% less than for alpha-AlH3.