RhIAr/AuIAr′ Transmetalation: A Case of Group Exchange Pivoting on the Formation of M−M′ Bonds through Oxidative Insertion

By combining kinetic experiments, theoretical calculations, and microkinetic modeling, we show that Pf/Rf (C₆F₅/C₆Cl₂F₃) exchange between [AuPf(AsPh₃)] and trans‐[RhRf(CO)(AsPh₃)₂] does not occur by typical concerted Pf/Rf transmetalation via electron‐deficient double bridges. Instead, it involves asymmetric oxidative insertion of the Rh^I complex into the (Ph₃As)Au?Pf bond to produce a [(Ph₃As)Au?RhPfRf(CO)(AsPh₃)₂] intermediate, followed by isomerization and reductive elimination of [AuRf(AsPh₃)]. Interesting differences were found between the LAu?Ar asymmetric oxidative insertion and the classical oxidative addition process of H₂ to Vaska complexes.     

Undesired Bulk Oxidation of LiMn2O4 Increases Overpotential of Electrocatalytic Water Oxidation in Lithium Hydroxide Electrolytes

Chemical and structural changes preceding electrocatalysis obfuscate the nature of the active state of electrocatalysts for the oxygen evolution reaction (OER), which calls for model systems to gain systematic insight. We investigated the effect of bulk oxidation on the overpotential of ink-casted LiMn₂O₄ electrodes by a rotating ring-disk electrode (RRDE) setup and X-ray absorption spectroscopy (XAS) at the K shell core level of manganese ions (Mn−K edge). The cyclic voltammogram of the RRDE disk shows pronounced redox peaks in lithium hydroxide electrolytes with pH between 12 and 13.5, which we assign to bulk manganese redox based on XAS. The onset of the OER is pH-dependent on the scale of the reversible hydrogen electrode (RHE) with a Nernst slope of −40(4) mV/pH at −5 μA monitored at the RRDE ring. To connect this trend to catalyst changes, we develop a simple model for delithiation of LiMn₂O₄ in LiOH electrolytes, which gives the same Nernst slope of delithiation as our experimental data, i. e., 116(25) mV/pH. From this data, we construct an E^RHE-pH diagram that illustrates robustness of LiMn₂O₄ against oxidation above pH 13.5 as also verified by XAS. We conclude that manganese oxidation is the origin of the increase of the OER overpotential at pH lower than 14 and also of the pH dependence on the RHE scale. Our work highlights that vulnerability to transition metal redox may lead to increased overpotentials, which is important for the design of stable electrocatalysts.     

Making Use of the Direct Process Residue: Synthesis of Bifunctional Monosilanes

The industrial production of monosilanes Me_nSiCl_4−n (n=1–3) through the Müller–Rochow Direct Process generates disilanes Me_nSi₂Cl_6−n (n=2–6) as unwanted byproducts (“Direct Process Residue”, DPR) by the thousands of tons annually, large quantities of which are usually disposed of by incineration. Herein we report a surprisingly facile and highly effective protocol for conversion of the DPR: hydrogenation with complex metal hydrides followed by Si−Si bond cleavage with HCl/ether solutions gives (mostly bifunctional) monosilanes in excellent yields. Competing side reactions are efficiently suppressed by the appropriate choice of reaction conditions.     

Hydridoorganostannylene Coordination: Group 4 Metallocene Dichloride Reduction in Reaction with Organodihydridostannate Anions

Organodihydridoelement anions of germanium and tin were reacted with metallocene dichlorides of Group 4 metals Ti, Zr and Hf. The germate anion [Ar*GeH₂]⁻ reacts with hafnocene dichloride under formation of the substitution product [Cp₂Hf(GeH₂Ar*)₂]. Reaction of the organodihydridostannate with metallocene dichlorides affords the reduction products [Cp₂M(SnHAr*)₂] (M=Ti, Zr, Hf). Abstraction of a hydride substituent from the titanium bis(hydridoorganostannylene) complex results in formation of cation [Cp₂M(SnAr*)(SnHAr*)]⁺ exhibiting a short Ti–Sn interaction. (Ar*=2,6-Trip₂C₆H₃, Trip=2,4,6-triisopropylphenyl).     

Cooperativity of Catechols and Amines in High‐Performance Dry/Wet Adhesives

The outstanding adhesive performance of mussel byssal threads has inspired materials scientists over the past few decades. Exploiting the amino‐catechol synergy, polymeric pressure‐sensitive adhesives (PSAs) have now been synthesized by copolymerizing traditional PSA monomers, butyl acrylate and acrylic acid, with mussel‐inspired lysine‐ and aromatic‐rich monomers. The consequences of decoupling amino and catechol moieties from each other were compared (that is, incorporated as separate monomers) against a monomer architecture in which the catechol and amine were coupled together in a fixed orientation in the monomer side chain. Adhesion assays were used to probe performance at the molecular, microscopic, and macroscopic levels by a combination of AFM‐assisted force spectroscopy, peel and static shear adhesion. Coupling of catechols and amines in the same monomer side chain produced optimal cooperative effects in improving the macroscopic adhesion performance.     

PtCl2-catalyzed cycloisomerizations of 5-en-1-yn-3-ol systems

5-En-1-yn-3-ol substrates bearing a free hydroxyl group or an acyl group are highly versatile partners for PtCl2-catalyzed cycloisomerizations. Electrophilic activation of the alkyne moiety triggers at wish a hydride or an O-acyl migration yielding at the end to regioisomeric keto derivatives. The efficient preparation of Sabina ketone, an important monoterpene precursor, has been worked out.     

Scaling behavior of nonisothermal phase separation

The phase separation process in a critical mixture of polydimethylsiloxane and polyethylmethylsiloxane (PDMS/PEMS, a system with an upper critical solution temperature) was investigated by time-resolved light scattering during continuous quenches from the one-phase into the two-phase region. Continuous quenches were realized by cooling ramps with different cooling rates kappa. Phase separation kinetics is studied by means of the temporal evolution of the scattering vector qm and the intensity Im at the scattering peak. The curves qm(t) for different cooling rates can be shifted onto a single mastercurve. The curves Im(t) show similar behavior. As shift factors, a characteristic length Lc and a characteristic time tc are introduced. Both characteristic quantities depend on the cooling rate through power laws: Lc approximately kappa(-delta) and tc approximately kappa(-rho). Scaling behavior in isothermal critical demixing is well known. There the temporal evolutions of qm and Im for different quench depths DeltaT can be scaled with the correlation length xi and the interdiffusion coefficient D, both depending on DeltaT through critical power laws. We show in this paper that the cooling rate scaling in nonisothermal demixing is a consequence of the quench depth scaling in the isothermal case. The exponents delta and rho are related to the critical exponents nu and nu* of xi and D, respectively. The structure growth during nonisothermal demixing can be described with a semiempirical model based on the hydrodynamic coarsening mechanism well known in the isothermal case. In very late stages of nonisothermal phase separation a secondary scattering maximum appears. This is due to secondary demixing. We explain the onset of secondary demixing by a competition between interdiffusion and coarsening.     

Synthesis and characterization of heavier dioxouranium(VI) dihalides

The synthesis and characterization of the dioxouranium(VI) dibromide and iodide hydrates, UO(2)Br(2)x3H(2)O (1), [UO(2)Br(2)(OH(2))(2)](2) (2), and UO(2)I(2)x2H(2)Ox4Et(2)O (3), are reported. Moreover, adducts of UO(2)I(2) and UO(2)Br(2) with large, bulky OP(NMe(2))(3) and OPPh(3) ligands such as UO(2)I(2)(OP(NMe(2))(3))(2) (4), UO(2)Br(2)(OP(NMe(2))(3))(2) (5), and UO(2)I(2)(OPPh(3))(2)(6) are discussed. The structures of the following compounds were determined using single-crystal X-ray diffraction techniques: (1) monoclinic, P2(1)/c, a = 9.7376(8) A, b = 6.5471(5) A, c = 12.817(1) A, beta = 94.104(1) degrees , V = 815.0(1) A(3), Z = 4; (2) monoclinic, P2(1)/c, a = 6.0568(7) A, b = 10.5117(9) A, c = 10.362(1) A, beta = 99.62(1) degrees , V = 650.5(1) A(3), Z = 2; (4) tetragonal, P4(1)2(1)2, a = 10.6519(3) A, b = 10.6519(3) A, c = 24.0758(6) A, V = 2731.7(1) A(3), Z = 4; (5) tetragonal, P4(1)2(1)2, a = 10.4645(1) A, b = 10.4645(1) A, c = 23.7805(3) A, V = 2604.10(5) A(3), Z = 4, and (6) monoclinic, P2(1)/c, a = 9.6543(1) A, b = 18.8968(3) A, c = 10.9042(2) A, beta =115.2134(5) degrees , V = 1783.01(5) A(3), Z = 2. Whereas 1 and 2 are the first UO(2)Br(2) hydrates and the last missing members of the UO(2)X(2) hydrate (X = Cl --> I) series to be structurally characterized, 4 and 6 contain room-temperature stable U(VI)-I bonds with 4 being the first structurally characterized room temperature stable U(VI)-I compound which can be conveniently prepared on a gram scale in quantitative yield. The synthesis and characterization of 5 using an analogous halogen exchange reaction to that used for the preparation of 4 is also reported.     

Polyampholytic Graft Copolymers as Matrix for TiO2/Eosin Y/[Mo3S13]2− Hybrid Materials and Light-Driven Catalysis

An effective strategy to enhance the performance of inorganic semiconductors is moving towards organic-inorganic hybrid materials. Here, we report the design of core–shell hybrid materials based on a TiO₂ core functionalized with a polyampholytic (poly(dehydroalanine)-graft-(n-propyl phosphonic acid acrylamide) shell (PDha-g-PAA@TiO₂). The PDha-g-PAA shell facilitates the efficient immobilization of the photosensitizer Eosin Y (EY) and enables electronic interactions between EY and the TiO₂ core. This resulted in high visible-light-driven H₂ generation. The enhanced light-driven catalytic activity is attributed to the unique core–shell design with the graft copolymer acting as bridge and facilitating electron and proton transfer, thereby also preventing the degradation of EY. Further catalytic enhancement of PDha-g-PAA@TiO₂ was possible by introducing [Mo₃S₁₃]²⁻ cluster anions as hydrogen-evolution cocatalyst. This novel design approach is an example for a multi-component system in which reactivity can in future be independently tuned by selection of the desired molecular or polymeric species.