Determination of degree of conversion as a function of depth of a photo-initiated dental restoration composite—III application to commercial Prodigy Condensable™

In this third work, we evaluated the degree of conversion (DC) versus depth of dental filling composite named Prodigy Condensable™ using infrared spectroscopy. Confirming previous results, there was a gradual reduction of DC with increasing depth but the composite exhibited extreme values of DC, an upper value (45.9%) on the surface and a lower one (6.1%) at a depth of 5 mm. The composite presented the worst performance among materials studied. The composite formulation was 80% of inorganic fillers and BisfenolA/dimethacrylate (BisGMA) (18%)/triethyleneglycoldimethacrylate (TEGDMA) (2.0%) as monomers. As stated before, type/ratio/viscosity of monomers and type, amount, size and size distribution of fillers all together had an important role in the cure reaction contributing to the final performance of the composite.     

Thermal analysis study on vaporization of some analgesics. Acetanilide and derivatives

The thermal behaviour of acetanilide (Ac) and two of its analogues, namely the para-ethoxyacetanilide (p-Eto Ac) and the para-bromoacetanilide (p-Br Ac), which are used as analgesics in the pharmaceutical industry was studied with a simultaneous TG/DSC unit. The examined analgesics showed two endothermic DSC peaks due to melting and vaporization. By combining the experimental TG data with the corresponding reference vapour pressure data obtained with the Antoine equation the plot of P versus v was derived. From the slope of this equation the constant k-value was determined for Ac. Then, using the same k-value the vapour pressures of p-Eto Ac and p-Br Ac were determined in the same temperature range. The vaporization enthalpies for all the studied compounds were obtained from different methods and a very good agreement was found. Vaporization follows a zero-order kinetics. The activation energy of vaporization (E_vap) was calculated from the dynamic TG experiments, using the Arrhenius equation.     

Thermal studies of pre-formulates of metronidazole obtained by spray drying technique

Compatibility studies between active drugs and excipients are substantial in the pharmaceutical technology. The objective of the present work was to develop pre-formulated mixtures of metronidazole (MT) obtained by spray drying (SPDR) and their thermoanalytical characterization. Dynamic and isothermal TG, conventional DSC and DSC coupled to a photovisual system were used. DSC experiments with both techniques confirmed the homogeneity of the conventional and pre-formulated mixtures. The TG data made possible the comparison the thermal stability of the different mixtures. Similar thermal stabilities were found of the conventional and pre-formulated mixtures, with slower particles sizes of MT.     

Liquid chromatography-diode array detection-electrospray ionisation mass spectrometry/nuclear magnetic resonance analyses of the anti-hyperglycemic flavonoid extract of Genista tenera. Structure elucidation of a flavonoid-C-glycoside

The anti-hyperglycemic flavonoid extract obtained from Genista tenera was first studied by liquid chromatography (LC)-diode array detection (DAD) which showed the presence of two major compounds. One of them was identified as genistein-7-O-glucoside. Luteolin-7-O-glucoside was detected as a minor constituent, while luteolin-7,3'-di-O-glucoside and rutin were found in trace amounts. LC-DAD-ESI-MS and NMR were used to confirm the structure of these compounds and allowed the elucidation of the structure of the unknown major compound, which is the flavonoid 5,7,4'-trihydroxyisoflavone-8-C-glucoside.     

The Effects of Beating,Web Forming and Sizing on the Surface Energy of <Emphasis Type="Italic">Eucalyptus globulus</Emphasis> Kraft Fibres Evaluated by Inverse Gas Chromatography

In this work attention has been focused on the effects of papermaking beating, web forming and sizing operations on the physical/chemical surface properties of bleached Eucalyptus globulus kraft fibres. Inverse gas chromatography (IGC) was used to determine the dispersive component of surface tension (γ_s^d) as well as the acidic/basic character (according to the Lewis concept) of the solid surfaces (pulp fibres and pulp handsheets). The results have shown that the main effect of beating is to increase the fibre's Lewis acidic character. Web forming caused a strong decrease in γ_s^d and significant increments in the adhesion works of both acidic and basic probes, lowering the ratio between the two. Nevertheless, the surface of handsheets still exhibited a dominant acidic character. The sizing operation did not change the dispersive component of the surface tension significantly but decreased the difference between the adhesion works of the acidic and basic probes, rendering the handsheet surface less Lewis acidic and more Lewis basic. Thus, although internal sizing is expected to strongly influence liquid spreading at the paper surface and liquid penetration of the fibre's network, it is concluded that beating and web forming lead to important changes in the surface energetic properties of the Eucalyptus globulus kraft fibres.     

On the High Viscosity of Aqueous Solution of Lysozyme Induced by Some Organic Solvents

A remarkably high viscosity has been induced in protein aqueous solutions by the addition of certain structurally related organic solvents. The effect has been observed for lysozyme aqueous solutions containing tetramethylurea (TMU), dimethylsulfoxide (DMSO), dimethylformamide, and hexamethylphosphortriamide. The effect has also been induced in ferrocytochrome c aqueous solutions by TMU. Critical concentrations for both the protein and organic solvent were verified for the onset of the viscosity increase. A common feature of the solvents which were able to induce the effect is a dipolar moiety (C=O, S → O and P → O) and a nonpolar region represented by the methyl groups. The resulting fluids show an extremely restricted flow and a typical non-Newtonian, pseudoplastic behavior. Use was made of¹H nuclear magnetic resonance (NMR) and Raman spectroscopy to characterize protein structural modifications and of¹³C NMR to investigate changes in relaxation times and chemical shifts in the solvent/water solutions. A systematic rheological characterization of the systems was undertaken for some of the solvents, and unusual patterns of viscous effects were identified for the solvent/water systems both with and without protein. The process was found to be at least partially reversible, as concluded from the recovered original solution rheological characteristics and the original protein¹H NMR spectrum, after eliminating the organic solvent by ultrafiltration. The whole process was characterized as consisting of two mutually independent stages. The first involves an extensive conformational transition of the polypeptide backbone, from a predominantly α-helical to increased random coiled and β-sheet structures, with the occurrence of nonorthodox protein secondary structures at regions above the solvent critical point. The second stage consists of short-lived interchain contacts leading to an entanglement of the macromolecular system as a whole. A microphase reversion in the organic solvent/water mixture, supported by¹³C NMR and rheological results, is proposed as the driving force causing the observed behavior.     

Adsorption-penetration studies of glucose oxidase into phospholipid monolayers at the 1,2-dichloroethane/water interface.

The interaction between glucose oxidase (GOx) and phospholipid monolayers is studied at the 1,2-dichloroethane/water interface by electrochemical impedance spectroscopy. Electrochemical experiments show that the presence of GOx induces changes in the capacitance curves at both negative and positive potentials, which are successfully explained by a theoretical model based on the solution of the Poisson-Boltzmann equation. These changes are ascribed to a reduced partition coefficient of GOx and an increase of the permittivity of the lipid hydrocarbon domain. Our results show that the presence of lipid molecules enhances the adsorption of GOx molecules at the liquid/liquid interface. At low lipid concentrations, the adsorption of GOx is probably the first step preceding its penetration into the lipid monolayer. The experimental results indicate that GOx penetrates better and forms more stable monolayers for lipids with longer hydrophobic tails. At high GOx concentrations, the formation of multilayers is observed. The phenomenon described here is strongly dependent on 1) the GOx and lipid concentrations, 2) the nature of the lipid, and 3) the potential drop across the interface.     

Determination of dopamine in synthetic cerebrospinal fluid by SWV with a graphite–polyurethane composite electrode

This work describes an electroanalytical investigation of dopamine using cyclic voltammetry (CV) and the graphite–polyurethane composite electrode (GPU). In CV studies, well-defined redox peaks characterize the oxidation process at the GPU electrode, which is indicative of electrocatalytic effects associated with active sites on the GPU electrode surface. A new analytical methodology was developed using the GPU electrode and square wave voltammetry (SWV) in BR buffer solution (0.1 mol L^–1; pH 7.4). Analytical curves were constructed under optimized conditions (f=60s^–1, E_a=50 mV, E_I=2 mV) and detection and quantification limits of 6.4×10^–8 mol L^–1 (12.1 g L^–1) and 5.2×10^–6 mol L^–1 (0.9 mg L^–1), respectively, were achieved. The precision of the method was checked by performing ten successive measurements for a 9.9×10^–6 mol L^–1 dopamine solution. For intra-assay and inter-assay precisions, the relative standard deviations were 1.9 and 2.3%, respectively. In order to evaluate the developed methodology, the determination of dopamine was performed with good sensitivity and selectivity, without the interference of ascorbic acid in synthetic cerebrospinal fluid, which indicates that the new methodology enables reliable analysis of dopamine.     

Stereochemistry and dynamic behavior of some synthetic “angular” profisetinidin tetraflavanoid derivatives

The structure and stereochemistry of four synthetic “angular” tetraflavanoid-condensed tannin derivatives are examined by high-resolution variable temperature ¹H NMR. spectroscopy, and hence correlated with their dynamic behavior. Three “angular” oligomers exist as stable rotational isomers at ambient temperatures, thus contrasting with the mobility about their interflavanoid bonds of most natural profisetinidin “trimeric” and “tetrameric” homologs. A “linear” tetraflavanoid analog results from one of these regioselectively controlled condensations.     

Molecular dynamics simulations of a nucleoside analogue of 1,4-dihydro-4-oxoquinoline-3-carboxylic acid synthesized as a potential antiviral agent: Conformational studies in vacuum and in water

Conformational analysis of nucleosides may have direct applications to the structure–activity relationship (SAR) studies and in the design of new drug candidates. Although conformational analysis may be accessed in many different ways, in this work it was performed using molecular dynamics (MD) simulation in order to study the dynamic behavior of a nucleoside derivative of 1,4-dihydro-4-oxoquinoline-3-carboxylic acid, synthesized by our group as a potential antiviral agent. The MD simulation was carried out during 10 ns in vacuum and in a box of water at two different temperatures (i.e., 300 and 600 K) using the AMBER force field. The in vacuum MD simulation results are in agreement with the crystallographic structure and with the DFT calculations of the nucleoside, revealing the anti conformer as the more stable one. The simulation in water, however, shows that both conformers may exist at 300 K, the temperature of the in vivo and in vitro assays, revealing that both the syn and anti conformers should be considered in a MD simulation study of the inhibitor–enzyme complex. Simulations are also in agreement with the NOE experiment, which shows that the anti conformer is the preferential one in DMSO-d6 solution at 298 K.