Influence of hydrogenated oligo(cyclopentadiene) on the structure and the thermal degradation of polypropylene-based nanocomposites

Polypropylene has been compounded with a commercial organoclay both in the absence and in the presence of hydrogenated oligo(cyclopentadiene) (HOCP) as a compatibiliser. The characteristics and the properties of the nanocomposites were evaluated and compared. HOCP favours the intercalation of the polypropylene in the organoclay galleries and enables a more homogeneous dispersion of the nanoclay throughout the polymer matrix. In the compatibilised nanocomposite, the diluent effect ascribed to the HOCP component is associated with the nucleating action of the nanoclay, resulting in the development of the β-crystalline form of the polypropylene. The presence of HOCP preserves the molecular weight of the polymer during the processing and gives good overall mechanical properties to the compatibilised nanocomposite. The thermo-oxidative degradation of the polypropylene is strongly delayed in the compatibilised nanocomposite.     

Peptide anchored Langmuir–Blodgett films of a fullerene amphiphile

A new amphiphilic derivative of fullerene C₆₀ bearing an oligoglycyl tail (C₆₀CHCOgly₂OEt, 2) formed stable Langmuir floating films at the air–water interface. This occurred when the molecular assembly was stabilized by anchoring the amphiphilic C₆₀'s to the aqueous subphase, via hydrogen bonding interactions between a dipeptide (Gly–L–Leu) dissolved in the water subphase, and the oligoglycyl chain. The compression (π−A) isotherm of the Langmuir floating film constructed in such a way showed no hysteresis, was steep, and evidenced that the monolayer collapsed at a surface pressure π65 mN m⁻¹, thus confirming that the film was tightly packed, extremely stable, and rigid. A limiting area per molecule of 89.1 Ų was extrapolated, in agreement with the calculated cross-section area of the C₆₀ fullerene. On the contrary, when the dipeptide was absent and pure water was used as the subphase, the π−A isotherm yielded a limiting area <55 Ų which indicated the formation of multiple layers; moreover it showed significant hysteresis, the film was fragile, and it collapsed at π≈50 mN m⁻¹. Once anchored by the dipeptide, the floating monolayer of 2 could be transferred onto hydrophobic quartz, glass and silicon substrates, by successive vertical dipping cycles, each cycle made up of two down-strokes and two up-strokes, to yield the Langmuir–Blodgett film. Up to 200 down- and up-strokes could be repeated reproducibly, a noteworthy result for non-covalently assembled LB films of fullerenes. The transfer ratio was 1.0, except for the second down-stroke of each cycle that gave a transfer ratio of zero, making the sequence of successful transfers: D, U, U, (cleaning and spreading), D, U, U, (cleaning and spreading), and so on (D=down-stroke, U=up-stroke). The total number of deposited layers was therefore 150. X-ray diffraction spectra were registered and exhibited a peak, which was fitted by a Montecarlo method of simulation to obtain the distribution of the repeat unit responsible for scattering; such distribution, with thickness between 20 and 60 Å, was consistent with the size of the amphiphile and the transfer sequence. The UV–Vis spectra of the LB film exhibited the characteristic C₆₀ bands, and the absorption peaks in the 200–400 nm range were proportional to the number of layers, indicating that the deposition was reproducible and that the molecular environment of C₆₀ in each layer remained constant.     

Synthesis of monoprotected 1,4-diketones by photoinduced alkylation of enones with 2-substituted-1,3-dioxolanes

Photosensitized hydrogen abstraction from 2-alkyl-1,3-dioxolanes by triplet benzophenone gives the corresponding 1,3-dioxolan-2-yl radicals and these are trapped by ,β-unsatured ketones yielding monoprotected 1,4-diketones. With open chain ketones (3-buten-2-one and 4-penten-3-one) the yields are low and competitive pathways in part consume the radicals. With cyclic enones however, yields are good as tested with cyclopentenone, cyclohexenone and 4-hydroxy-cyclopentenone. More generally, this is a viable alternative for the synthesis of 1,4-diketones via radicals while the thermal initiation gives only low yield. The reaction cannot be extended to strongly stabilized radicals, such as the 2-phenyl-1,3-dioxolanyl radical.     

Selective C(sp3)−H Aerobic Oxidation Enabled by Decatungstate Photocatalysis in Flow

A mild and selective C(sp³)?H aerobic oxidation enabled by decatungstate photocatalysis has been developed. The reaction can be significantly improved in a microflow reactor enabling the safe use of oxygen and enhanced irradiation of the reaction mixture. Our method allows for the oxidation of both activated and unactivated C?H bonds (30 examples). The ability to selectively oxidize natural scaffolds, such as (?)‐ambroxide, pregnenolone acetate, (+)‐sclareolide, and artemisinin, exemplifies the utility of this new method.     

On the occurrence of the central line (1025 cm) in the SERS spectra of pyridine adsorbed on silver hydrosols

The occurrence of a central line at 1025 cm⁻¹ between the surface-enhanced Raman scattering (SERS) bands of pyridine at 1008 and 1036 cm⁻¹ has been first detected in silver hydrosols. This band, which has no counterpart in the Raman spectrum of the free ligand, is observed in acidic aqueous suspension as corresponding to that observed in an electrochemical cell and attributed to adsorption of pyridinium cation. When pyridine is adsorbed on an aged colloid in an alkaline medium two different species are detected. A central band at about the same wave number occurs, attributable to pyridine bound to silver ion cluster on the metal surface, oxidised by ambient air.     

Synchronous fluorescence spectroscopy and gas chromatography to determine the effect of UV irradiation on crude oil

The fate of the crude oil under irradiation was studied. After the UV irradiation, the fraction present in the highest percentage shifted from C8–C9 fraction to C13 one, in GC–MS analysis. An increase of the relative amount of the C13–C25 fraction was observed, while a decrease in the relative amount of the C7–C12 fractions was present. The synchronous fluorescence spectrum showed a maximum at 396 nm. Two hours irradiation of the sample induced an increase of the fluorescence emission in the region 420–550 nm. After 20, 40, 60, and 100 h irradiation we observed a decrease of the fluorescence emission.     

A study on the essential oil of Ferulago campestris: How much does extraction method influence the oil composition?

The essential oil of different parts of Ferulago campestris (Bess.) collected in Sicily has been extracted by microwave-assisted hydrodistillation (MAHD) and by classic hydrodistillation (HD). A comparative qualitative-quantitative study on the composition of the oils was carried out. A total of 100 compounds were identified in the oils obtained by MAHD, whereas 88 compounds characterized the HD oils. The most prominent components were, in all different parts of F. campestris and in both extraction methods, 2,4,5-trimethylbenzaldehyde and 2,4,6-trimethylbenzaldehyde isomers; the latter was not previously found. The attempt to evaluate where the oil components are located in all parts of the plant was carried out by means of a kinetic study. Then, electron microscopy observation on the different parts before and after MAHD and HD was performed.     

Stochastic theory of size exclusion chromatography by the characteristic function approach

A general stochastic theory of size exclusion chromatography (SEC) able to account for size dependence on both pore ingress and egress processes, moving zone dispersion and pore size distribution, was developed. The relationship between stochastic-chromatographic and batch equilibrium conditions are discussed and the fundamental role of the 'ergodic' hypothesis in establishing a link between them is emphasized. SEC models are solved by means of the characteristic function method and chromatographic parameters like plate height, peak skewness and excess are derived. The peak shapes are obtained by numerical inversion of the characteristic function under the most general conditions of the exploited models. Separate size effects on pore ingress and pore egress processes are investigated and their effects on both retention selectivity and efficiency are clearly shown. The peak splitting phenomenon and peak tailing due to incomplete sample sorption near to the exclusion limit is discussed. An SEC model for columns with two types of pores is discussed and several effects on retention selectivity and efficiency coming from pore size differences and their relative abundance are singled out. The relevance of moving zone dispersion on separation is investigated. The present approach proves to be general and able to account for more complex SEC conditions such as continuous pore size distributions and mixed retention mechanism.     

Optical Nanocomposite Planar Waveguides Doped with Rare-Earth and Noble Metal Elements

The present paper is focused on multilayer Er³⁺-doped silica-titania planar waveguides, co-doped with silver, which were prepared by spin-coating on silica glass, or buffered single crystal silicon substrates. The single layer thickness (0.4 m) and refractive index (1.60–1.63) were measured by spectroscopic ellipsometry at 715 nm. The thickness of the waveguides (measured by mechanical profilometry) was 1 m and their optical propagation losses were measured at different laser wavelengths (488 nm, 514 nm and 633 nm), exhibiting an approximately Rayleigh-like behavior. The thermal precipitation of silver nanocrystallites was achieved, both in air and under a controlled atmosphere (dry nitrogen) and these were characterized by visible absorption spectroscopy, which clearly showed the development of a plasmon absorption band near 415 nm, by X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM). The Er³⁺ metastable level lifetimes for the emission at ca. 1.54 m were found to be ca. 4–6 ms, for Er³⁺ concentrations varying between 0.2–2.0 mol% (or (0.4–4.4) × 10²⁰ ions/cm³), but no significant variation was observed with the Ag concentration added (up to 2.5 mol%).     

Study of Glow Wire Ignition Temperature (GWIT) and Comparative Tracking Index (CTI) performances of engineering thermoplastics and correlation with material properties

Recent regulation IEC 60335-1 ed.4 (2008) was introduced for materials used in electric appliance, establishing new limits in Glow Wire Ignition Temperature (GWIT) performance for materials used for electric connectors. Development of new products with high GWIT is possible, but the main issue is to keep good mechanical properties and processability, as well as tracking resistance (Comparative Tracking Index-CTI). Only a few patents and scientific publications exist about glow wire test performance of polymers. In this work we report GWIT and CTI properties for three engineering thermoplastic polymers (PBT, PET and PC). We have also studied the phenomena involved in this test, treating the phenomena with the parameterisation approach already used in the studies of the fire behaviour of polymers. PC, PBT and PET filled with 30% w/w glass fibres have been tested, and material properties that can be related to GWIT and CTI performance have been measured by TGA, Laser Flash Thermal Diffusivity (LFTD), Pyrolysis-GC/MS. CTI seems to be correlated with the char formation tendency of the materials, so PBT show a higher tracking resistance than PET and PC. Polycarbonate was the only material that passed the glow wire test (GWIT higher than 775 °C) but generally GWIT performance is not directly related with degradation temperature, since PET is thermally more stable compared with PBT, but less stable in glow wire test. The ignition process, together with the unsteady heat and mass transfer process characteristic of glow wire testing, are affected by many parameters at the same time. That’s why it is not easy to relate results of TGA, Laser flash, Pyrolysis-GC/MS with the glow wire ignition temperature of the materials tested, but the whole of these properties can give useful indication.