Study on the interaction of platinum(IV), gold(III) and silver(I) ions with DNA

Fluorescence, absorption spectra have been produced by the interaction of platinum(IV), silver(I) and gold(III) ions with the berberine–DNA system (berberine, Scheme 1). Platinum(IV) and gold(III) ions show different effects from that of silver(I) ion on the spectral characteristics of the berberine–DNA system. Quenching fluorescence is seen with platinum(IV) and gold(III) ions addition, whereas increasing fluorescence is observed for silver(I) ions. The addition of gold(III) and silver(I) ions cause an increase in absorption of the berberine–DNA system. The above results suggest that different metal ions exhibit different affinities when binding to DNA correlates well with the ions’ charge, structure and the coordination ability.     

In-capillary micro solid-phase extraction and capillary electrophoresis separation of heterocyclic aromatic amines with nanospray mass spectrometric detection

A miniaturised technique to analyse and detect heterocyclic aromatic amines (HAs) using micro solid-phase extraction (SPE) coupled on-line (in-capillary) to capillary electrophoresis (CE) separation with nanospray (nESI) mass spectrometry (MS) detection has been developed. HAs are mutagenic and carcinogenic compounds formed at low levels in protein-rich food during cooking. Due to the low concentrations of HAs and the high complexity of the matrix in which they exist, sensitive and selective analytical methods are required for quantification. SPE was performed on a packed bed of C₁₈ particles inside the CE capillary, which minimised the dead volume. The on-line coupling of SPE, CE and nESI-MS reduced the time for extraction and identification to less than half an hour, which will allow for screening of several samples per day. The new technique provides short analysis time, low sample and solvent consumption, and HAs in standard solutions were easily detected at 12–17 fmol injections, and in spiked urine samples at 750–810 fmol injections.     

Standard pH values for potassium hydrogenphthalate reference buffer solutions in 10, 30 and 50% (w/w) 1,4-dioxane/water mixed solvents at temperatures from 288.15 to 318.15 K

Standard pH(S) values for 0.05 mol kg^?1 potassium hydrogenphthalate (KHpH) reference buffer solutions in 10, 30 and 50% (w/w) 1,4-dioxane/water solvent mixtures within the temperature range 288.15–318.15 K are determined from e.m.f. measurements of the cell without transference Pt|H₂|KHPh + KCl|AgCl|Ag|Pt. The consistency of the results is analysed by a recently described method of multilinear regression of the quantity p(a_Hγ_Cl) as a function of both solution composition and temperature. The standard pH(S) determined can be reproduced to within ±0.01 by the equation pH(S) - 4.004 + 3.309w + 0.408z + 1.037w³ - 14.95zw² + 27.1zw³, where w is the weight fraction of dioxane in the solvent mixture,z = (T –θ)/θ, and θ - 298.15 K. Values of the first ionization constant of phthalic acid (H₂Ph; benzene-1,2-dicarboxylic acid) in the above solvent mixtures are also determined from e.m.f. measurements of the cell without transference Pt|H₂|H₂Ph + KHPh + KCl|AgCl|Ag|Pt.     

Reaction of singlet oxygen with some benzylic sulfides

Product distribution, total quenching rate (k_T), and rate of chemical reaction (k_r) with singlet oxygen have been determined for some alkyl, benzyl, α-methylbenzyl, and cumyl sulfides. Their contributions depend on the steric hindering around the sulfur atom. In protic solvents, the sulfoxide is the main product via a hydrogen-bonded persulfoxide. In apolar solvents, intramolecular α-H abstraction leads to oxidative C-S bond cleavage, with varying efficiency. The behavior of sulfides is compared to that of alkenes and amines.     

High-performance liquid chromatographic determination of cocaine and benzoylecgonine by direct injection of human blood plasma sample into an alkyl-diol-silica (ADS) precolumn

A column-switching high-performance liquid chromatographic method with UV detection for the determination of cocaine (COC) and benzoylecgonine (BZE) in human blood plasma samples is described. The method uses an alkyl-diol-silica ADS-C18 extraction precolumn. A 50- micro L plasma sample was introduced to the ADS precolumn in order to separate the analytes from proteins and endogenous compounds. The fraction containing COC and BZE was back-flushed and transferred to an Alltech mixed-mode C(18)/cation-exchange analytical column for final separation. The validation of the method revealed quantitative recoveries from 95.0 to 99.0% for COC at three different concentrations (0.5, 1.0 and 2.0 micro g mL(-1)), and from 96.0 to 99.0% for BZE at the same concentration levels with coefficients of variation <4.00% (n=5). The detection limit (signal to noise ratio (S/N)>3) was 0.03 micro g mL(-1) for all the compounds with an injection volume of 50 micro L. However, it was possible to enhance the sensitivity further by injecting larger plasma volumes, up to 200 micro L, at the same optimal conditions. The overlap of sample preparation, analysis and reconditioning of the extraction column, increase the overall sample throughput to 5 samples h(-1). The developed method has been applied to human blood plasma samples from subjects suspected of cocaine abuse.     

Determination of S-carboxymethyl-L-cysteine and some of its metabolites in urine and serum by high-performance liquid chromatography using fluorescent pre-column labelling.

Pre-column labelling techniques are described for the determination of S-carboxymethyl-L-cysteine (CMC) and its metabolites in urine and plasma samples by high-performance liquid chromatography (HPLC) without prior extraction. All substances containing an amino group were converted into fluorescent fluorenylmethyl derivatives with 9-fluorenylmethyloxycarbonyl chloride (FMOC). Deaminated or N-acetylated carbocysteine metabolites were coupled with 1-pyrenyldiazomethane (PDAM) to give fluorescent PDAM esters. Similar results were obtained with the two commercially available and stable diazomethane derivatives PDAM and 9-anthryldiazomethane (ADAM). Following double derivatization with PDAM and FMOC, in a single chromatographic run with two fluorescence detectors connected in series, amines and amino(carboxylic) acids could be detected by their FMOC residues and, simultaneously, carboxylic acids were detected as fluorescent PDAM esters. The (R) and (S) enantiomers of the sulphoxides of CMC, of methylcysteine and of N-acetyl CMC were separated, although the reversed-phase HPLC system did not contain a chiral additive or stationary phase designed for the separation of enantiomers. The methods do not include liquid extraction steps and can therefore be performed either manually or automatically using an HPLC autosampler. These methods were used for the investigation of a disputed pharmacogenetic polymorphism of S-oxidation of CMC in humans, which until now has most often been studied using paper chromatography. The described techniques were applied to the determination of CMC and its metabolites in human urine and plasma samples.     

Substituent control in the diastereoselectivity of dipolar cycloadditions of nitrones and their Zn(II) complexes with N-arylmaleimides

The π-π stacking interactions between maleimide's and nitrone's aromatic rings during the 1,3-dipolar cycloaddition were assumed to control the exo-endo selectivity of the reaction. The exo-endo ratios change during the reactions until they reach a constant value, which depends on the substituent. Electron-withdrawing groups favour the exo adduct while electron-donating groups favour the endo adduct. The nitrone ZnBr₂ complexes react much more slowly than the free nitrone and the cycloaddition is exo selective in all cases independent of the substituents on the maleimide's aromatic ring. Thermal retrocycloaddition of the cycloadducts produce the corresponding nitrones. The ring opening in the presence of secondary amines did not induce imine formation. endo Adducts were shown for the first time to be the stable paramagnetic compounds.     

Analysis of dinitro- and amino-nitro-toluenesulfonic acids in groundwater by solid-phase extraction and liquid chromatography–mass spectrometry

A reversed-phase LC–MS method with quadrupole-time of flight (QTOF) detection has been developed for the determination of four dinitro-toluenesulfonic acids and two amino-nitro-toluenesulfonic acids in groundwater. The analytes were separated by HPLC with 0.1% (v/v) formic acid as mobile phase modifier compatible with mass spectrometric detection. QTOF-MS analysis with negative ion electrospray ionization afforded good selectivity and sensitivity for analysis of the dinitro- and amino-nitro-toluenesulfonic acids. Structure elucidation and confirmation were accomplished by tandem mass spectrometry. Characteristic ions resulting from the loss of NO, NO₂, and SO₂ from the [M–H]^– ions were detected. An intense fragment ion at m/z 80 representing the [SO₃]^– ion was detected for all dinitro- and amino-nitro-toluenesulfonic acids. Solid-phase extraction using a co-polymer cartridge was developed for preconcentration of the analytes from water. Good recovery (>85%) was achieved when 0.1% formic acid was added into the water samples before extraction. Method detection limits ranged from 10 to 76 ng L^–1 for the targeted compounds when 10 mL water was analyzed. Groundwater samples collected from wells close to a former ammunition plant in Stadtallendorf, Germany, were analyzed for the dinitro- and amino-nitro-toluenesulfonic acids.     

Selective influencing of the migration time of SO4(2-) by forming neutral species with Pb2+ in capillary zone electrophoresis.

Organic and inorganic anions are analyzed using capillary zone electrophoresis with indirect fluorescence detection. As electrolyte 2,5-dihydroxybenzoic acid is used. By adding Pb2+ to the electrolyte the migration time of SO4(2-) can be selectively influenced and the separation of Cl- and SO4(2-) considerably improved. The fluorescence intensity of 2,5-dihydroxybenzoic acid increases in the presence of Pb2+ up to a concentration of 6*10(-4) mol/L Pb2+. Limits of detection in the lower mumol/L range were obtained.     

Determination of affinity constants and response factors of the noncovalent dimer of gramicidin by electrospray ionization mass spectrometry and mathematical modeling

The dimerization of gramicidin, a 15-residue membrane peptide, in solution can be viewed as a model for protein-protein interactions. We reported previously that the dimer can be observed when electrosprayed from organic solvents and that the abundances of the dimer depends on the dielectric constant of the solvent. Here, we report an effort to determine an affinity constant for the dimerization of gramicidin by using gas-phase abundance. Two issues affecting the determination are the electrospray-induced dissociation of the dimer and discrimination in the electrospray of the dimer compared with the monomer. Other methods developed for the purpose of determining affinity from mass spectral abundance do not address the dissociation of the complex in the gas phase or can not be applied for cases of low affinity constant, K(a). We present a mathematical model that uses the ratio of the signal intensities of the dimer and the monomer during a titration. The model also incorporates the dissociation and an electrospray ionization-response factor of the dimer for extracting the affinity constant for the dimerization of gramicidin. The dimerization constants from the new method agree within a factor of two with values reported in the literature.