Influence of pi-stacking on the redox properties of oligothiophenes: (alpha-alkyloligo-thienyl)para[2.2]cyclophanes

[structure: see text] Oligothienyl-substituted paracyclophanes bearing alpha-thienyl substituents, which block polymerization at these sites, undergo oxidation to form stable radical cations and dications. Splitting of the first voltammetric oxidation wave of stacked dimers into two single-electron processes corresponding to formation of the stacked mono(radical cation) and the stacked bis(radical cation) illustrates the influence of pi-stacking on the behavior of conjugated chains, which serve as models for stacked polarons in conjugated polymers.     

Collisional relaxation of the three vibrationally excited difluorobenzene isomers by collisions with CO2: effect of donor vibrational mode

Relaxation of highly vibrationally excited 1,2-, 1,3-, and 1,4-difluorobenzne (DFB) by collisions with carbon dioxide has been investigated using diode laser transient absorption spectroscopy. Vibrationally hot DFB (E' approximately 41,000 cm(-1)) was prepared by 248 nm excimer laser excitation followed by rapid radiationless relaxation to the ground electronic state. Collisions between hot DFB isomers and CO2 result in large amounts of rotational and translational energy transfer from the hot donors to the bath. The CO2 nascent rotational population distribution of the high-J (J = 58-80) tail of the 00(0)0 state was probed at short times following the excimer laser pulse to measure rate constants and probabilities for collisions populating these states. The amount of translational energy gained by CO2 during collisions was determined using Doppler spectroscopy to measure the width of the absorption line for each transition. The energy transfer probability distribution function, P(E,E'), for the large DeltaE tail was obtained by resorting the state-indexed energy transfer probabilities as a function of DeltaE. P(E,E') was fit to a biexponential function to determine the average energy transferred in a single DFB/CO2 collision and fit parameters describing the shape of P(E,E'). P(E,E') fit parameters for DFB/CO2 and the previously studied C6F6/CO2 system are compared to various donor molecular properties. A model based on Fermi's Golden Rule indicates that the shape of P(E,E') is primarily determined by the low-frequency out-of-plane donor vibrational modes. A fractional mode population analysis is performed, which suggests that for energy transfer from DFB and C6F6 to CO2 the two key donor vibrational modes from which energy leaks out of the donor into the bath are nu11 and nu16. These "gateway" modes are some of the same modes determined to be the most efficient energy transfer modes by quantum scattering studies of benzene/He collisions.     

A specific spectrophotometric determination of ozone in air in the presence of sulfur dioxide and nitrogen oxides

A sensitive, specific spectrophotometric method for the determination of ozone in air by the ozonolysis of 1,1-di-phenylethylene (DPE) is described. The yield of formaldehyde from the ozonolysis of several terminal olefins was determined, and DPE was found to give the highest yield, 90%. The method was checked against the EPA iodimetric method, and gives a consistent yield of formaldehyde over the ozone range 0.05–5.00 μg g^-1 of air. As sulfur dioxide is used as a reagent, its presence in air does not interfere. Interference by nitrogen oxides and other free radical oxidants is prevented by the addition of mesitol (2,4,6-trimethylphenol). Formaldehyde in air interferes, but can be determined by using the method with DPE omitted from the sampling train, and so accounted for. In the procedure, formaldehyde is determined by the reverse of the West—Gaeke method for sulfur dioxide.     

Control of anchoring of nematic fluids at polymer surfaces created by in situ photopolymerization

In situ photopolymerization of alkyl acrylate monomers in the presence of a nematic fluid provides a cellular matrix of liquid crystalline droplets in which the chemical structure of the encapsulating polymer exerts control over the alignment (anchoring) of the liquid crystalline molecules. Control is obtained by variation of the alkyl side chains and through copolymerization of two dissimilar monofunctional acrylates. For example, among a series of poly(methylheptyl acrylate)s, the 1-methylheptyl analogue prefers planar anchoring of a nematic (TL205) over the temperature range studied. However, the polymers of other methylheptyl side chains display a homeotropic-to-planar anchoring thermal transition temperature similar to that of the n-heptyl analogue. Copolymerization of two monofunctional acrylates with opposing tendencies of aligning liquid crystal leads to tunability of anchoring behavior over a wide temperature range. The broad anchoring transitions we observed provide a way of achieving highly tilted anchoring.     

Enantio-, Regio- and Chemoselective Copper-Catalyzed 1,2-Hydroborylation of Acylsilanes

Enantioselective synthesis of synthetically significant (α-hydroxyallyl)silanes, (α-hydroxyaryl)silanes, and (α-hydroxyalkyl)silanes is reported. The present copper-catalyzed 1,2-selective hydroborylation of acylsilanes affords the aforementioned products in high yields and with high enantiomeric excesses. This robust and scalable additive-free catalytic system relies on the use of low copper(II) acetate and diphosphine ligand loadings at room temperature in the presence of a commercially available and bench-stable hydride source.     

Suzuki cross-coupling reactions catalyzed by palladium nanoparticles in aqueous solution

Palladium nanoparticles stabilized by poly(N-vinyl-2-pyrrolidone) (PVP) are efficient catalysts for the Suzuki reactions in aqueous medium. The time dependence of the fluorescence intensity of the biphenyl product in the reaction between iodobenzene and phenylboronic acid is used to determine the initial rate of the catalytic reaction. The initial rate depends linearly on the concentration of Pd catalyst, suggesting that the catalytic reaction occurs on the surface of the Pd nanoparticles.     

Competition Between π–π and CH/π Interactions: A Comparison of the Structural and Electronic Properties of Alkoxy‐Substituted 1,8‐Bis((propyloxyphenyl)ethynyl)naphthalenes

The structural and electronic consequences of π–π and C?H/π interactions in two alkoxy‐substituted 1,8‐bis‐ ((propyloxyphenyl)ethynyl)naphthalenes are explored by using X‐ray crystallography and electronic structure computations. The crystal structure of analogue 4 , bearing an alkoxy side chain in the 4‐position of each of the phenyl rings, adopts a π‐stacked geometry, whereas analogue 8 , bearing alkoxy groups at both the 2‐ and the 5‐positions of each ring, has a geometry in which the rings are splayed away from a π‐stacked arrangement. Symmetry‐adapted perturbation theory analysis was performed on the two analogues to evaluate the interactions between the phenylethynyl arms in each molecule in terms of electrostatic, steric, polarization, and London dispersion components. The computations support the expectation that the π‐stacked geometry of the alkoxyphenyl units in 4 is simply a consequence of maximizing π–π interactions. However, the splayed geometry of 8 results from a more subtle competition between different noncovalent interactions: this geometry provides a favorable anti‐alignment of C?O bond dipoles, and two C?H/π interactions in which hydrogen atoms of the alkyl side chains interact favorably with the π electrons of the other phenyl ring. These favorable interactions overcome competing π–π interactions to give rise to a geometry in which the phenylethynyl substituents are in an offset, unstacked arrangement.     

Oxygen reactivity in flavoenzymes: context matters

Many flavoenzymes--oxidases and monooxygenases--react faster with oxygen than free flavins do. There are many ideas on how enzymes cause this. Recent work has focused on the importance of a positive charge near N5 of the reduced flavin. Fructosamine oxidase has a lysine near N5 of its flavin. We measured a rate constant of 1.6 × 10(5) M(-1) s(-1) for its reaction with oxygen. The Lys276Met mutant reacted with a rate constant of 291 M(-1) s(-1), suggesting an important role for this lysine in oxygen activation. The dihydroorotate dehydrogenases from E. coli and L. lactis also have a lysine near N5 of the flavin. They react with O(2) with rate constants of 6.2 × 10(4) and 3.0 × 10(3) M(-1) s(-1), respectively. The Lys66Met and Lys43Met mutant enzymes react with rate constants that are nearly the same as those for the wild-type enzymes, demonstrating that simply placing a positive charge near N5 of the flavin does not guarantee increased oxygen reactivity. Our results show that the lysine near N5 does not exert an effect without an appropriate context; evolution did not find only one mechanism for activating the reaction of flavins with O(2).     

Investigation of 3C-SiC growth on Si(111) by vapor–liquid–solid transport using a SiGe liquid phase

The crystal growth of 3C-SiC onto silicon substrate by Vapor–Liquid–Solid (VLS) transport, where a SiGe liquid phase is fed with propane, has been investigated. Three sample configurations were used. In a preliminary approach, the VLS growth of SiC was conducted directly onto Si substrate using a Ge film as liquid catalyst. It led to the growth of a thick continuous SiC polycrystalline layer which was floating over a SiGe alloy located between the silicon substrate and the topping SiC layer. In the second configuration, a thin seeding layer of 3C-SiC grown by chemical vapor deposition (CVD) was used and the VLS growth was localized using a SiO₂ mask. The liquid phase was a CVD deposited SiGe alloy. The growth of a few hundred nanometers thick 3C-SiC epitaxial layer was demonstrated but the process was apparently affected by the presence of the oxide which was dramatically etched at the end. In the last configuration, the silicon substrate was patterned down to 10 μm and a thin seeding layer of 3C-SiC was grown by CVD onto this patterned substrate. The liquid phase was again a CVD deposited SiGe alloy. In this last configuration, the presence of epitaxial SiC was evidenced but it grew as trapezoidal islands instead of an uniform layer.     

GC/MS determination of incidental PCBs in complex chlorinated-hydrocarbon process and waste streams

An electron-impact gas chromatography/mass spectrometry method using selected ion monitoring for the determination of incidental polychlorinated biphenyls in complex chlorinated-hydrocarbon samples is described. Ions in the molecular-ion cluster for each degree of chlorination (from monochloro- to decachlorobiphenyl) are monitored. Individual PCB isomers are used as standards. Validation data collected for several complex chlorinated-hydrocarbon matrices in three different laboratories had a relative precision (2sigma) of 20% with a limit of detection (3 x standard deviation of base-line noise) of 5 ppm for a single isomer at any degree of chlorination. The method has been used for the determination of incidental PCBs in more than 1000 samples from more than 30 different chlorinated-hydrocarbon sample matrices.