Microwave synthesis of zeolites. 2. Effect of vessel size, precursor volume, and irradiation method

The enhancement of synthesis reactions under microwave heating is dependent on many complex factors. We investigated the importance of several reaction engineering parameters relevant to microwave synthesis. Of interest to this investigation were the reaction vessel size, volume of precursor reacted, microwave power delivery, and microwave cavity design. The syntheses of NaY zeolite and beta-zeolite were carried out under a number of varying conditions to determine the influence of these parameters on the nucleation rate, the crystallization rate, and the particle size and morphology. The rates of NaY and beta-zeolite nucleation and crystallization were more rapid in the multimode CEM MARS-5 oven compared to the more uniform field CEM Discover. The faster synthesis rate in the MARS-5 may be the result of the multimode microwave electric field distribution. Slower rates of NaY and beta-zeolite formation observed in the Discover and a circular waveguide may be the result of a more uniform microwave electric field distribution. Changes in reaction vessel size and precursor volume during the microwave synthesis of beta- and NaY zeolite were found to influence the rate of zeolite formation. These results indicate that reactor geometry needs to be considered in the design of systems used for microwave synthesis. Comparative synthesis reactions were carried out with conventional heating, and microwave heating was shown to be up to over an order of magnitude faster for most of these syntheses.     

Photoisomerizable DNA Ligands. A Simple Method to Probe the Regions of AT-Rich Sequences

The dramatic effect of the microenvironment on the mechanism and quantum yield of photoisomerization have been widely evidenced; therefore, one can expect that the DNA matrix can modulate photoisomerization of properly designed ligands, and it may have an analytical importance.     

Determination of substitutional sites in heterocycles from the topological analysis of the electron localization function (ELF)

The topological analysis of the electron localization function ELF has been carried out on five‐membered (C₄H₄NH, C₄H₄PH, C₄H₄O, C₄H₄S) and six‐membered (C₅H₅N, C₅H₅P) heterocycles. The bonding in these molecules is discussed on the basis of the valence basin populations. It is shown that the values of the ELF function at the (3,−1) critical points between disynaptic basins related to a given center provide a criterion to determine substitutional sites. © 2000 John Wiley & Sons, Inc. J Comput Chem 21: 509–514, 2000     

Structural analysis of minimized models for syndiotactic polypropylene

In previous work we have shown that the stable form of syndiotactic polypropylene (sPP) adopts a fully antichiral packing in its crystalline lattice. At the same time, we had also discovered a number of prohibited reflections from crystallographic planes with a c-axis component, indicating distortions or defects along the molecular-chain direction and possible departures from the ideal Ibca unit-cell structure. Three studies that appeared in 1996 have proposed a number of possible minimized structures to explore the energetics of departure from such an ideal Ibca symmetry and to account for the prohibited reflections. Two of the studies were based upon energy minimization of the unit cell using empirical or spectroscopically derived force fields. The third model was based upon Rietveld refinement of the bulk X-ray diffractogram combined with ad hoc choices of space groups selected to reproduce the prohibited reflections, and results in a structure with minimal departures from Ibca. In the present article we examine the structural implications of all these models on various reciprocal-lattice sections of sPP by comparing calculated electron-diffraction patterns for appropriate zones with those we obtained experimentally from single crystals. We find that none of the proposed models fully accounts for the experimental data. One of the energy-minimized models (involving translation along the molecular axis) and the Rietveld-refined structure reproduce some of the observed reflections but are not in agreement with observed intensities and introduce additional unobserved reflections or other artifacts. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 2523–2533, 1997     

New pH sensitive network: Combination of an amphiphilic degradable polyester with a β-cyclodextrin copolymer

A novel hydrophobic monomer, ethyladamantyl malolactonate, has been synthesized and copolymerized with benzyl malolactonate by anionic ring-opening polymerization. The ratio of adamantyl monomer varied from 0 to 100 mol%. Deprotection of benzyl groups leads to a water soluble copolyester with carboxylic acid lateral functions which give a polyelectrolyte character to the corresponding polymers. The mixture of a copolyester containing 10% of adamantyl groups and a β-cyclodextrin/epichlorohydrin copolymer in aqueous solution leads to a new pH-dependant associating system. The solution behavior of this system was studied by viscosimetry as a function of pH, concentration and ratio of both copolymers. At the initial solution pH (pH=2), the copolyester adopts a coiled structure as a result of hydrophobic interactions between the pendant adamantyl groups. Consequently, no network formation is observed as shown by a very low viscosity. As the pH increase, the viscosity of the medium increases and reaches a maximum at pH=5. At this pH, the copolyester expands because of electrostatic repulsions between the carboxylate pendant functions. Consequently, the adamantyl groups are accessible and can be encapsulated into the β-cyclodextrin cavities resulting in a significant increase of the viscosity.     

Surface modification of chlorobutyl rubber by plasma polymerization

Radio frequency (r.f.) plasma polymerization of vinylidene fluoride (CH₂CF₂) has been used to modify the surface properties of chlorobutyl rubber. FTIR-ATR spectra of the treated rubbers and transmission spectra of plasma polymer films on NaCl windows indicated that as power increased the F/H ratio decreased. SIMS tests supported the FTIR results, and showed that the decrease in the F/H ratio was due to a decrease in the amount of F and an increase in the amount of H in the plasma polymer. Sliding friction measurements showed a reduction in the coefficient of friction (μ) from 3.7 for the untreated rubber to values ranging between 0.4 and 1.9 for the plasma-treated rubbers. There did not appear to be any correlation between the coefficient of friction and plasma power or monomer flow rate, and the average coefficient of friction for the plasma-treated samples was 0.9, which was lower than a commercially used silicone oil treatment (μ = 1.1–1.3). Repetitive sliding friction tests showed that the plasma- and silicone oil treated-chlorobutyl rubbers had the similar lubricating lifetimes. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1651–1660, 1997     

Recycled injection-molded and fibre-reinforced polyethylene/polypropylene

In this presentation, we are concerned with the fabrication and characterization of samples of compression-molded and injection-molded recycled polyethylene, with, in some cases, addition of cellulose fibre. We wish to know what is the performance of such plastics, as compared to the virgin materials and what is the effect of added fibre in both molding modes.     

Dramatically Enhanced Fluorescence of Heteroaromatic Chromophores upon Insertion as Spacers into Oligo(triacetylene)s

In continuation of a previous study on the modulation of π‐electron conjugation of oligo(triacetylene)s by insertion of central hetero‐spacer fragments between two (E)‐hex‐3‐ene‐1,5‐diyne ((E)‐1,2‐diethynylethene, DEE) moieties (Fig. 1), a new series of trimeric hybrid oligomers ( 14 – 18 and 22 – 24 , Fig. 2) were prepared (Schemes 1–3). Spacers used were both electron‐deficient (quinoxaline‐based heterocycles, pyridazine) and electron‐rich (2,2′‐bithiophene, 9,9‐dioctyl‐9H‐fluorene) chromophores. With 19–21 (Scheme 4), a series of transition metal complexes was synthesized as potential precursors for nanoscale scaffolding based on both covalent acetylenic coupling and supramolecular assembly. The UV/VIS spectra (Fig. 3) revealed that the majority of spacers provided hetero‐trimers featuring extended π‐electron delocalization. The new hybrid chromophores show a dramatically enhanced fluorescence compared with the DEE dimer 13 and homo‐trimer 12 (Fig. 5). This increase in emission intensity appears as a general feature of these systems: even if the spacer molecule is non‐fluorescent, the corresponding hetero‐trimer may show a strong emission (Table 2). The redox properties of the new hybrid chromophores were determined by cyclic voltammetry (CV) and rotating‐disk voltammetry (RDV) (Table 3 and Fig. 5). In each case, the first one‐electron reduction step in the hetero‐trimers appeared anodically shifted compared with DEE dimer 13 and homo‐trimer 12 . With larger spacer chromophore extending into two dimensions (as in 14 – 18 , Fig. 2), the anodic shift (by 240–490 mV, Table 3) seems to originate from inductive effects of the two strongly electron‐accepting DEE substituents rather than from extended π‐electron conjugation along the oligomeric backbone, as had previously been observed for DEE‐substituted porphyrins.