Quantitative analysis of phenobarbital in dosage form by thin-layer chromatography combined with densitometry

In this paper, a high-performance thin-layer chromatography (HPTLC) method combined with densitometry has been described. Chromatography was performed on silica gel Si 60F254 plates using dichloromethane-ethyl acetate-formic acid (9.5 +/- 0.5 +/- 0.1, v/v) mobile phase. This method has been successfully applied for the determination of phenobarbital in pharmaceuticals. Obtained results were comparable with traditionally used column high-performance liquid chromatography (HPLC) methods. For the proposed procedure, linearity (r > 0.999), sensitivity (limit of detection 0.4 microg/spot), recovery (97.8-102.1%), and repeatability were found to be satisfactory. The HPTLC-densitometry method has many advantages, such as simplicity, reasonable sensitivity, rapidity, and low cost, and it can be successfully used in routine quality control of multidrug preparations containing barbiturates.     

Detection of arsenic-containing hydrocarbons in canned cod liver tissue

Arsenic is a metalloid well known to be potentially toxic depending of its species. Lipid-soluble arsenicals (arsenolipids) are present in a wide range of biological samples in which they could play a role in the biosynthesis of organoarsenic compounds from inorganic arsenic compounds. Arsenolipids have recently attracted considerable interest. In order to gain deeper insights into the impact of arsenolipids new analytical approaches for reliable determination of this class of arsenic-containing hydrocarbons in various matrices are needed.High concentrations of arsenolipids were found in seafood which served as sample material in this study. We report the investigation of three arsenolipids found in canned cod liver from which they were extracted and purified by solid phase extraction (SPE) using a silica gel column and ethyl acetate/methanol as eluent. Analytical studies were conducted by means of gas chromatography coupled with ICP-MS, MIP-AES and EI-qMS and by TOF-MS. The results obtained by GC-ICP-MS and GC-MIP-AES showed the existence of numerous arsenic compounds in the SPE fractions collected. Three major peaks were found within a retention time window between 10 and 25 min. The presence of arsenic compounds in the fish tissue could be confirmed using GC-EI-qMS analysis. Corresponding information of the molecular weights of the major arsenic species were provided by TOF-MS which allows highly accurate mass determinations. The results showed the presence of the arsenic-containing hydrocarbons with the following molecular formulas: C₁₇H₃₇AsO (calculated for [M+H]⁺ 333.2133; found 333.2136; Δm = 0.90 ppm); C₁₉H₄₁AsO (calculated for [M+H]⁺ 361.2446; found 361.2446; Δm = 0.00 ppm); C₂₃H₃₇AsO (calculated for [M+H]⁺ 405.2133; found 405.2145; Δm = 2.96 ppm). Suggestions for the corresponding structures are discussed.     

Chromatographic analysis of penstemide and serrulatoloside by high-performance liquid chromatography and gradient thin-layer chromatography

Summary A sensitive capillary gas chromatographic method is described for the simultaneous determination of lidocaine, tetracaine, procaine and dibucaine. The method was applied to the determination of anesthetics in tissue homogenates incubated at 38°C at doses between 10 and 400 mg/kg. In the liver tissue thein vitro metabolization of the studied anesthetics is most rapid for tetracaine, also fast for procaine, while for lidocaine and dibucaine the metabolization is very slow. In brain tissue thein vitro metabolization of anesthetics is very slow.The method shows good analytical parameters: linearity between 5 and 40 g/ml; day-to-day reproducibility ca. 8% for a concentration of 20 g/ml, precision ca. 7% for a concentration of 20g/ml. Accuracy is also very good.     

Capillary batch injection analysis and capillary flow injection analysis with electrochemical detection: a comparative study of both methods

Capillary batch injection analysis (CBIA) and capillary flow injection analysis (CFIA) in combination with electrochemical detection as well as optical detection methods were studied and compared with respect to their performance. Despite the differences in technical equipment both techniques share the same idea of reproducible transport and washout of nanolitre samples over sensing surfaces. Thus the same electrochemical flow cell can be used for both CBIA and CFIA. The amperometric and potentiometric CBIA responses were studied under various experimental conditions in order to optimise the CBIA set-up. In particular, the density of the sample solution relative to that of the cell electrolyte had a remarkable effect on the hydrodynamic characteristics of CBIA. Dispersion in CFIA was investigated using on column UV-detection for electroosmotic flow (EOF) conditions as well as for gravity flow conditions. It is demonstrated for a 75 μm capillary that the relative band broadening of the sample plug under gravity flow is only about twice as large as under EOF. Furthermore, dispersion in a system that involves a chemical reaction between the sample and the carrier solution, namely CrO₇ ^2– and Fe²⁺ has been investigated by amperometric detection and exploited for the determination of dichromate microsamples.     

Comparison of μm and mm sized disk electrodes for end-column electrochemical detection in capillary electrophoresis

End-column electrochemical detection based on either the use of a 25 μm microdisk electrode or a 0.5 mm macrodisk electrode has been compared with respect to performance and influence on non-aqueous capillary electrophoretic separations. Despite the much higher coulometric efficiency obtained with the larger disk electrode, the microdisk electrode configuration offers comparable limits of detection (LOD) for the neutral and positively charged ferrocene compounds employed in conjunction with a non-aqueous acetonitrile-based buffer. The LODs for ferrocene were found to be 4.0 × 10^–8 M and 6.7 × 10^–8 M for the microdisk and macrodisk detector, respectively. In addition, both detector arrangements showed different relative responses for neutral and positively charged analytes. The macroelectrode-based detector introduced additional zone broadening while this was not found to be the case with the microelectrode arrangement. Using the microelectrode detector, the band broadening in an electro-osmotically driven flow system was compared to that in a gravity flow-based system. It was demonstrated that the zone broadening under gravity flow conditions was approximately twice as large as under electro-osmotic flow conditions for a typical set of experimental parameters. Received: 1 June 1998 / Revised: 20 August 1998 / Accepted: 24 August 1998     

Comparison of μm and mm sized disk electrodes for end-column electrochemical detection in capillary electrophoresis

End-column electrochemical detection based on either the use of a 25 μm microdisk electrode or a 0.5 mm macrodisk electrode has been compared with respect to performance and influence on non-aqueous capillary electrophoretic separations. Despite the much higher coulometric efficiency obtained with the larger disk electrode, the microdisk electrode configuration offers comparable limits of detection (LOD) for the neutral and positively charged ferrocene compounds employed in conjunction with a non-aqueous acetonitrile-based buffer. The LODs for ferrocene were found to be 4.0 × 10^–8 M and 6.7 × 10^–8 M for the microdisk and macrodisk detector, respectively. In addition, both detector arrangements showed different relative responses for neutral and positively charged analytes. The macroelectrode-based detector introduced additional zone broadening while this was not found to be the case with the microelectrode arrangement. Using the microelectrode detector, the band broadening in an electro-osmotically driven flow system was compared to that in a gravity flow-based system. It was demonstrated that the zone broadening under gravity flow conditions was approximately twice as large as under electro-osmotic flow conditions for a typical set of experimental parameters.     

Speciation of organotin compounds by capillary electrophoresis: comparison of aqueous and mixed organic-aqueous systems

A capillary electrophoresis method with direct ultraviolet detection was developed for the analysis of organotin species. Despite the fact that direct detection of organotin compounds by ultraviolet absorption is difficult because most organotins possess poor chromophoric properties, the application of low wavelength (=200 nm) and mixed organic-aqueous media enabled a significant enhancement in sensitivity. A mixed organic-aqueous system (10% methanol/40% acetonitrile/50% H₂O) containing acetic acid and tetrabutylammonium perchlorate formed the basis for rapid, efficient and sensitive determinations of organotin cations such as tripropyltin, tributyltin, triphenyltin and diphenyltin. The concentration limits of detection (LOD) for the four organotin compounds were in the range of 0.4–14 M, comparable to that obtained with the most sensitive indirect UV method reported until now, and took advantage of a stable baseline, a symmetric peak shape and an absence of disturbing system peaks. The relative standard deviations (n=7) for the relative peak time and peak area were 0.44–0.77 and 4.8–5.8%, respectively. In addition to sensitivity enhancements, the use of organic-aqueous systems instead of pure aqueous media resulted in improved selectivity and efficiency of separations.     

Recent advances in high resolution scanning electrochemical microscopy of living cells – A review

This review discusses advances in the field of high resolution scanning electrochemical microscopy (HR-SECM) and scanning ion conductance microscopy (SICM) to study living cells. Relevant references from the advent of this technique in the late 1980s to most recent contributions in 2012 are presented with special discussion on high resolution images. A clear progress especially within the last 5 years can be seen in the field of HR-SECM. Furthermore, we also concentrate on the intrinsic properties of SECM imaging techniques e.g. different modes of image acquisition, their advantages and disadvantages in imaging living cells and strategies for further enhancement of image resolution, etc. Some of the recent advances of SECM in nanoimaging have also been discussed which may have potential applications in high resolution imaging of cellular processes.