Thalidomide analogs from diamines: Synthesis and evaluation as inhibitors of TNF-alpha production

Fourteen thalidomide analogs bearing two phthalimido units were prepared in high yields (83-94%) by condensation of different diamines with phthalic or 3-nitrophthalic anhydride. An in vitro investigation of the compounds as inhibitors of the TNF-alpha production was performed. The inhibition was higher for compounds bearing amino and nitro groups and was modulated by increasing the size of the spacers between the phthalimide groups.     

Transfer measurements for the Ti+Ni systems at near barrier energies

Large enhancements have been observed in the sub-barrier fusion cross sections for Ti+Ni systems in our previous studies. Coupled channel calculations incorporating couplings to 2⁺ and 3⁻ states failed to explain these enhancements completely. A possibilty of transfer channels contributing to the residual enhancements had been suggested. In order to investigate the role of relevant transfer channels, measurements of one- and two-nucleon transfer were carried out for ^46,48Ti+⁶¹Ni systems. The present paper gives the results of these studies.     

Modelling of pipeline integrity taking into account the fluid–structure interaction

Two mechanical models have been presented in this paper for structural failure prediction of piping systems conveying liquids subjected to pressure transients. One model takes into account the axial fluid–structure interaction (FSI) phenomenon between fluid and pipe motion, whereas the other refers to an extension of the well-known waterhammer formulation. Both models are described by a system of non-linear hyperbolic equations which are solved by using a numerical procedure based upon the operator splitting technique and Glimm's scheme. To implement Glimm's method, it is presented the solution of a 4×4 Riemann problem with discontinuous coefficients. Numerical predictions of both models are presented and compared, so that the influence of the FSI term on the failure analysis is focused on. © 1998 John Wiley & Sons, Ltd.     

Influence of Cu and Ni on the morphology and composition of the rust layer of steels exposed to industrial environment

Four samples of steels with alloying elements were exposed to an industrial environment during 1,955 days, aiming to elucidate the effect of the alloying elements Cu and Ni on the resistance of weathering steels to corrosion processes. The samples were characterized with optical microscopy, scanning electron microscopy (SEM), powder X-ray diffraction (XRD), saturation magnetization measurements and with energy dispersive (EDS), infrared, Mössbauer and Raman spectroscopies. All the steels originated orange and dark corrosion layers; their thicknesses were determined from the SEM images. EDS data of such rust layers showed that the alloying element content decreases from the steel core towards the outer part of the rust layer. Moreover, in the dark rust layer some light-gray regions were identified in the W and Cu-alloy steel, where relatively higher Cr and Cu contents were found. XRD patterns, infrared, Raman and Mössbauer spectra (298, 110 and 4 K) indicated that the corrosion products are qualitatively the same, containing lepidocrocite (γFeOOH; hereinafter, it may be referred to as simply L), goethite (αFeOOH; G), feroxyhite (δ′FeOOH; F), hematite (αFe₂O₃; H) and magnetite (Fe₃O₄; M) in all samples; this composition does not depend upon the steel type, but their relative concentrations is related to the alloying element. Mössbauer data reveal the presence of (super)paramagnetic iron oxides in the corrosion products. Saturation magnetization measurements suggest that feroxyhite may be an occurring ferrimagnetic phase in the rust layer.     

Determination of cadmium,copper and lead in alumina based catalysts by direct solid sampling graphite furnace atomic absorption spectrometry

Trace impurities of Cd, Cu and Pb were determined in alumina based catalysts using direct solid sampling graphite furnace atomic absorption spectrometry (DSS-GF AAS). The analyzed catalysts are widely used in petrochemical processes. The following analytical parameters were evaluated: pyrolysis and atomization temperatures, feasibility of calibration with aqueous solutions, the necessity for palladium as chemical modifier and the sample mass introduced into the atomizer. Test samples between 0.05 and 8.5 mg were used. Palladium was investigated as chemical modifier but no improvement in analytical performance was obtained and its use was considered unnecessary for all elements. The results obtained by DSS-GF AAS were compared with those of inductively coupled plasma optical emission spectrometry (ICP OES) and also with conventional solution analysis by GF AAS (Sol-GF AAS). Characteristic masses were 1.4, 9 and 20 pg, for Cd, Cu and Pb, respectively. Using DSS-GF AAS the relative standard deviation was always less than 10% and the results agreed with those obtained by Sol-GF AAS and ICP OES. Calibration using aqueous solutions showed good linearity within the working range (R² better than 0.99). Limits of detection (3σ, n = 10) for Cd, Cu and Pb using the proposed procedure were 0.2, 22, and 1.2 ng g^− 1, respectively.     

Capillary electromigration methods for fatty acids determination in vegetable and marine oils: A review

Fatty acids determination is of paramount importance for quality control and suitable labeling of edible oils, required by regulatory agencies in several countries, and fast methods for this determination are worldly desired. This review article aimed to explore the available analytical methods for vegetable and marine oils analyses employing CE, which can be a straightforward and faster alternative than GC methods for fatty acid determination, considering some purposes. CE usually offers the possibility of a rapid analysis with a simple preparation of the sample, without requiring specific columns, which are inherent advantages of the technique. Instrumental conditions and the key points about fatty acids determination employing the technique are highlighted, and the main challenges and perspectives are also approached. Potential use of CE for edible oil analyses has been demonstrated for research and routine, which can be of interest for industries, regulatory agencies, and edible oil researchers. Therefore, we have explored the analytical approaches described in the last decades, intending to spread the interest of CE methods for fatty acid monitoring, label accuracy assessment, and food authenticity evaluation of edible oils.