Sensitivity of a tucuxi (Sotalia fluviatilis guianensis) to airborne sound

Auditory systems of cetaceans are considered highly specialized for underwater sound processing, whereas the extent of their hearing capacity in air is still a point of issue. In this study, the sensitivity to airborne sound in a male tucuxi (Sotalia fluviatilis guianensis) was tested by means of a go/no go response paradigm. Auditory thresholds were obtained from 2 to 31.5 kHz. Compared to the hearing thresholds of other dolphins as well as of amphibian mammals, the sensitivity to airborne sound of the test subject is low from 2 to 8 kHz, with the highest threshold at 4 kHz. Thresholds at 16 and 31.5 kHz reveal a sharp increase in hearing sensitivity. Thus, although not obtained in this study, the upper aerial hearing limit is in the ultrasonic range. A comparison of the present data with the underwater audiogram of the same test subject referred to sound intensity indicates that the sensitivity of Sotalia to underwater sound is generally better than to airborne sound.     

Enhancement of a 24.77-nm line emitted by the plasma of a boron nitride capillary discharge irradiated by a high-intensity ultrashort laser pulse

Investigations of plasma produced by a boron nitride capillary discharge irradiated with a guided 20-TW Ti: sapphire laser pulse at a peak intensity of 4 x 10(18) W/cm2 are presented. The guided laser radiation in the plasma channel generated He-like ions that, subject to suitable plasma temperature, recombined into Li-like nitrogen ions. Intense radiation at a wavelength of 24.77 nm was observed, indicating possible lasing at the 3d(5/2) - 2p(3/2) transition in Li-like nitrogen.     

Dynamics of gold clusters on amorphous carbon films induced by annealing in a transmission electron microscope

The change of the size distribution of Au clusters induced by annealing was studied in situ by transmission electron microscopy. Starting from statistically distributed Au clusters on a thin amorphous carbon film, “islands” are formed within a few months storage at room temperature, which consist of Au clusters with sizes <4 nm embedded in a thin Au film. These islands cover originally areas with sizes around 25 × 70 nm². If the temperature is increased in the transmission electron microscope two different processes can be clearly distinguished that lead to the coarsening of the cluster size distribution: cluster coalescence and (contactless) Ostwald ripening. The degree and rate of the coarsening are found to depend on the underlying surface (Au film or amorphous carbon) and the exposure to the high-flux high-energy electron beam, which can be estimated to lead to high-temperature excursions in a cluster on a 10⁻¹² s time scale. The experimental findings are confirmed by Monte-Carlo simulations using the many-body Gupta potentials in order to calculate the Au/Au interaction. Moreover, the results of MC simulations suggest an electron-beam induced formation of a “quasi-two-dimensional gas” of small highly mobile Au species on the Au film, which promotes Ostwald ripening.     

Towards Higgs boson production in gluon fusion to NNLO in the MSSM

We consider the Higgs boson production in the gluon-fusion channel to next-to-next-to-leading order within the Minimal Supersymmetric Standard Model. In particular, we present analytical results for the matching coefficient of the effective theory and study its influence on the total production cross section in the limit where the masses of all MSSM particles coincide. For supersymmetric masses below 500 GeV it is possible to find parameters leading to a significant enhancement of the Standard Model cross section, the K-factors, however, change only marginally.     

MC-simulation of the 3D,q=3 Potts model

We consider theq=3 Potts model in three dimensions by Monte Carlo simulations. The microcanonical density of states is calculated as a function of the internal energy of the system. We extrapolate the data for the simulated finite systems to the thermo-dynamic limit and find a discontinuous phase transition. This method is checked in the two-dimensional case, where exact results are known.     

Development of a very low energy μ+ beam at PSI

At PSI we are investigating the technique of decelerating an existing very intense secondary beam of surface ⁺ (4 MeV) to an energy of 10 eV using appropriate moderators. These ⁺ can then be used as a source of a tertiary beam of low energy muons with tunable kinetic energy between 10 eV and 10 keV.With a 1000 A layer of solid Argon deposited on an Al substrate we obtain a moderation efficiency (with respect to the number of incoming surface ⁺) of the order of 10^–4.Results of our investigations and the present status of the project are presented together with future plans and possibilities.     

Polyelectrolyte-compression forces between spherical DNA brushes

Optical tweezers are employed to measure the forces of interaction within a single pair of DNA-grafted colloids, dependent on the molecular weight of the DNA chains, and the concentration and valence of the surrounding ionic medium. The resulting forces are short range and set in as the surface-to-surface distance between the colloidal cores reaches the value of the brush height. The measured force-distance relation is analyzed by means of a theoretical treatment that quantitatively describes the effects of compression of the chains on the surface of the opposite-lying colloid. Quantitative agreement with the experiment is obtained for all parameter combinations.     

Improved laser-induced forward transfer of organic semiconductor thin films by reducing the environmental pressure and controlling the substrate–substrate gap width

Laser-induced forward transfer (LIFT) has been investigated for bilayer transfer material systems: silver/organic film (Alq₃ or PFO). The LIFT process uses an intermediate dynamic release layer of a triazene polymer. This study focuses on the effect of introducing a controlled donor–receiver substrate gap distance and the effect of doing the transfer at reduced air pressures, whilst varying the fluence up to ∼200 mJ/cm². The gap between ‘in-contact’ substrates has been measured to be a minimum of 2–3 μm. A linear variation in the gap width from ‘in contact’ to 40 μm has been achieved by adding a spacer at one side of the substrate–substrate sandwich. At atmospheric pressure, very little transfer is achieved for Alq₃, although PFO shows some signs of successful doughnut transfer (with a large hole in the middle) in a narrow fluence range, at gaps greater than 20 μm. For the transfer of Ag/PFO bilayers at atmospheric pressure, the addition of a PFO layer onto the receiver substrate improved the transfer enormously at smaller gaps and higher fluences. However, the best transfer results were obtained at reduced pressures where a 100% transfer success rate is obtained within a certain fluence window. The quality of the pixel morphology at less than 100 mbar is much higher than at atmospheric pressure, particularly when the gap width is less than 20 μm. These results show the promise of LIFT for industrial deposition processes where a gap between the substrates will improve the throughput.     

Comparing closed quotient in children singers' voices as measured by high-speed-imaging, electroglottography, and inverse filtering

The closed quotient, i.e., the ratio between the closed phase and the period, is commonly studied in voice research. However, the term may refer to measures derived from different methods, such as inverse filtering, electroglottography or high-speed digital imaging (HSDI). This investigation compares closed quotient data measured by these three methods in two boy singers. Each singer produced sustained tones on two different pitches and a glissando. Audio, electroglottographic signal (EGG), and HSDI were recorded simultaneously. The audio signal was inverse filtered by means of the decap program; the closed phase was defined as the flat minimum portion of the flow glottogram. Glottal area was automatically measured in the high speed images by the built-in camera software, and the closed phase was defined as the flat minimum portion of the area-signal. The EGG-signal was analyzed in four different ways using the matlab open quotient interface. The closed quotient data taken from the EGG were found to be considerably higher than those obtained from inverse filtering. Also, substantial differences were found between the closed quotient derived from HSDI and those derived from inverse filtering. The findings illustrate the importance of distinguishing between these quotients.     

Energy distribution curves of ultrafast laser-induced field emission and their implications for electron dynamics

Energy distribution curves of laser-induced electron pulses from a tungsten tip have been measured as a function of tip voltage and laser power. Electron emission via tunneling through and/or excitation over the surface barrier from photoexcited nonequilibrium electron distributions are clearly observed. The spectral shapes largely vary with the emission processes and are strongly affected by electron dynamics. Simulations successfully reproduce the spectra, thus allowing direct insight into the involved electron dynamics and revealing the temporal tunability of electron emission via the two experimental parameters. These results should be useful to optimize the pulse characteristics for many applications based on ultrafast laser-induced electron emission.