Dithiane additions to vinyl epoxides: steric control over the SN2 and SN2' manifolds

High chemoselectivity can be achieved in the addition of lithium dithiane anions to vinyl epoxides exploiting the steric nature of the dithiane substituent. Unencumbered dithiane anions afford SN2 adducts, whereas sterically encumbered anions lead primarily to SN2' adducts. Furthermore, the SN2' addition occurs syn to the vinyl epoxide.     

Effects of petroleum resins on asphaltene aggregation and water-in-oil emulsion formation

Asphaltenes from four crude oils were fractionated by precipitation in mixtures of heptane and toluene. Solubility profiles generated in the presence of resins (1:1 mass ratio) indicated the onset of asphaltene precipitation occurred at lower toluene volume fractions (0.1–0.2) than without resins. Small-angle neutron scattering (SANS) was performed on solutions of asphaltene fractions in mixtures of heptane and toluene with added resins to determine aggregate sizes. Water-in-oil emulsions of asphaltene–resin solutions were prepared and separated by a centrifuge method to determine the vol.% water resolved. In general, the addition of resins to asphaltenes reduced the aggregate size by disrupting the π–π and polar bonding interactions between asphaltene monomers. Interaction of resins with asphaltenic aggregates rendered the aggregates less interfacially active and thus reduced emulsion stability. The smallest aggregate sizes observed and the weakest emulsion stability at high resin to asphaltene (R/A) ratios presumably corresponded to asphaltenic monomers or small oligomers strongly interacting with resin molecules. It was often observed that, in the absence of resins, the more polar or higher molecular weight asphaltenes were insoluble in solutions of heptane and toluene. The addition of resins dissolved these insolubles and aggregate size by SANS increased until the solubility limit was reached. This corresponded approximately to the point of maximum emulsion stability. Asphaltene chemistry plays a vital role in dictating emulsion stability. The most polar species typically required significantly higher resin concentrations to disrupt asphaltene interactions and completely destabilize emulsions. Aggregation and film formation are likely driven by polar heteroatom interactions, such as hydrogen bonding, which allow asphaltenes to absorb, consolidate, and form cohesive films at the oil–water interface.     

Bis(m-phenylene)-32-crown-10-based cryptands, powerful hosts for paraquat derivatives

Four new bis(m-phenylene)-32-crown-10-based cryptands with different third bridges were prepared. Their complexes with paraquat derivatives were studied by proton NMR spectroscopy, mass spectrometry, and X-ray analysis. It was found that these cryptands bind paraquat derivatives very strongly. Specifically, a diester cryptand with a pyridyl nitrogen atom located at a site occupied by either water or a PF(6) anion in analogous complexes exhibited the highest association constant K(a) = 5.0 x 10(6) M(-1) in acetone with paraquat, 9000 times greater than the crown ether system. X-ray structures of this and analogous complexes demonstrate that improved complexation with this host is a consequence of preorganization, adequate ring size for occupation by the guest, and the proper location of the pyridyl N-atom for binding to the beta-pyridinium hydrogens of the paraquat guests. This readily accessible cryptand is one of the most powerful hosts reported for paraquats.     

Simultaneously quantifying parent drugs and screening for metabolites in plasma pharmacokinetic samples using selected reaction monitoring information-dependent acquisition on a QTrap instrument

Bioanalytical support of plasma pharmacokinetic (PK) studies for drug discovery programs primarily involves the quantitative analysis of dosed compounds using liquid chromatography/atmospheric pressure ionization tandem mass spectrometry (LC/MS/MS) operated in selected reaction monitoring (SRM) mode. However, there is a growing need for information on the metabolism of new chemical entities (NCEs), in addition to the time-concentration profiles from these studies. In this paper, we present a novel approach to not only quantify parent drugs with SRM, but also simultaneously screen for metabolites using a hybrid triple quadrupole/linear ion trap (QqQ(LIT)) instrument. This was achieved by incorporating both the conventional SRM-only acquisition of parent compounds and the SRM-triggered information-dependent acquisition (IDA) of potential metabolites within the same scan cycle during the same LC/MS/MS run. Two test compounds were used to demonstrate the applicability of this approach. Plasma samples from PK studies were processed by simple protein precipitation and the supernatant was diluted with water before injection. The fast scanning capability of the linear ion trap allowed for the information-dependent acquisition of metabolite MS/MS spectra (<1 s/scan), in addition to the collection of adequate data points for SRM-only channels. The MS/MS spectra obtained from potential metabolites in post-dose samples correlated well with the spectra of the parent compounds studied, therefore providing additional confirmatory structure information without the need for repetitive analyses. Relative quantitative time-concentration profiles of identified metabolites were also obtained. Furthermore, this articulated SRM+SRM-IDA approach generated equivalent quantitative results for parent compounds to those obtained by conventional SRM-only analysis. This approach has been successfully used to support discovery PK screening programs.     

The first structural characterization of a phosphonium amide: synthesis, isolation and molecular structure of (Ph3PEt)(NPh2)

The first isolation of a phosphonium amide, (Ph₃PEt)⁺(NPh₂)⁻, obtained via the deprotonation of a secondary amine (diphenylamine) with a phosphorus ylide (triphenylphosphonium ethylide), is described. An X-ray crystal structure provides the first observation of an essentially ion-separated Ph₂N⁻ anion in the solid state, though weak association with Ph₃PEt⁺ cations take plac through C---H…N hydrogen bonding. Cryoscopic and NMR spectroscopic data suggest that this association is not maintained in benzene solution.     

Developments in suppressor technology for inorganic ion analysis by ion chromatography using conductivity detection

A review is presented detailing the development and use of suppression devices for the conductimetric detection of inorganic ions by ion chromatography (IC). An overview of the general response equation for conductivity detection is also given. Topics of discussion include the role and function of suppressors, the development of early suppressors including packed column and membrane devices from 1975 to 1990 and the subsequent progression towards present day commercially available suppressors and recent innovations. Post-suppression devices for signal enhancement are also discussed.     

Total synthesis of (-)-callystatin A

A total synthesis of the cytotoxic polyketide marine natural product callystatin A is described. The route features chiral allenylmetal additions to construct the polypropionate C15-22 segment and an sp(2)-sp(3) Suzuki coupling to join the C1-C11 and C12-C22 subunits.     

Chemoselective ligation applied to the synthesis of a biantennary N-linked glycoform of CD52

We report here a strategy for the synthesis of N-linked glycopeptide analogues that replace the glycosidic linkages extending from the core pentasaccharide with thioethers amenable to construction by chemoselective ligation. The key building block, a pentasaccharide-Asn analogue containing two thiol residues, was incorporated into CD52 by 9-fluorenylmethoxycarbonyl (Fmoc)-based solid-phase peptide synthesis. An undecasaccharide mimetic was then readily generated by alkylation of this glycopeptide with an N-bromoacetamido trisaccharide. The rapid assembly of a complex type N-linked glycopeptide mimetic was accomplished using this technique.     

Mimicry of host-defense peptides by unnatural oligomers: antimicrobial beta-peptides

We have designed beta-amino acid oligomers that are helical, cationic, and amphiphilic with the intention of mimicking the biological activity of amphiphilic, cationic alpha-helical antimicrobial peptides found in nature (e.g., magainins). We have previously identified a 17-residue beta-peptide (called beta-17) with antibiotic activity similar to that of a magainin derivative against four bacterial species, including two clinical isolates that are resistant to common antibiotics. This beta-peptide displays very low hemolytic activity against human red blood cells, which indicates selectivity for bacterial cells over mammalian cells. Here we examine some of the factors important for activity in this class of beta-peptides. An amphiphilic helix is necessary, because a nonamphiphilic isomer proved to be inactive. The ratio of cationic to hydrophobic residues is also important. Active beta-peptides induce the leakage of beta-galactosidase from treated Bacillus subtilis cells, as do alpha-helical antibiotic peptides, and this similarity suggests that the beta-peptide mode of action involves disruption of microbial membranes. This class of beta-peptides is not degraded by proteases, which bodes well for biological applications.     

Photohydration and photosolvolysis of biphenyl alkenes and alcohols via biphenyl quinone methide-type intermediates and diarylmethyl carbocations

Evidence is presented for the photochemical generation of novel biphenyl quinone methide (BQM)-type intermediates on photolysis of hydroxybiphenyl alkenes 7 and 8 and hydroxybiphenyl alcohols 9 and 10. Mechanistic investigations utilizing product, fluorescence, and nanosecond laser flash photolysis (LFP) studies indicate two distinct pathways for the formation of these BQMs depending upon the functional groups of the progenitor. Formal excited-state intramolecular proton transfer (ESIPT) between the phenol and the alkene led to BQMs upon irradiation of the hydroxybiphenyl alkenes 7 and 8, while excited-state proton transfer (ESPT) to solvent followed by dehydroxylation was responsible for BQM formation from the hydroxybiphenyl alcohols 9 and 10. Photolysis of 7 and 8 in aqueous CH(3)CN gave photohydration products via attack of water on the respective BQMs, while photolysis of the analogous methyl ethers (of the phenolic moiety) gave only carbocation intermediates. Hydroxybiphenyl alcohols 9 and 10 yielded the corresponding photomethanolysis products in aqueous methanol, through attack of CH(3)OH on the respective BQMs. Although no evidence was found for BQM formation in LFP studies of 8 and 10, due to its suspected short lifetime, the respective diaryl carbocation (lambda(max) 420 nm, tau = 8.5 micros) has been observed upon irradiation of 8 in 2,2,2-trifluoroethanol. A BQM (lambda(max) 580 nm) was observed for 9 but not for 10, the latter having more complex chemistry on laser excitation, resulting in a transient that appears to mask any BQM absorption. Significant quenching of fluorescence from the hydroxybiphenyl alkenes at low water content implies that H(2)O is directly involved in reaction from the singlet excited state. The decrease in fluorescence intensity of 8 was found to depend on [H(2)O](3); however, the distance required for ESIPT in these systems is too large to be bridged by a water trimer. The nonlinear quenching has been attributed to deprotonation of the phenol by two water molecules, with concerted protonation at the alkene by another molecule of water. Fluorescence quenching of the hydroxybiphenyl alcohols required much higher water content, implying a different mechanism of reaction, consistent with the proposal of ESPT (to solvent water) followed by dehydroxylation.