Imaging chirality with surface second harmonic generation microscopy

Chirality is a fundamental construct in nature which arises from an antisymmetric arrangement of atoms, molecules, or larger structures, resulting in the formation of nonsuperimposable mirror images. Bulk chiral effects can easily be measured using circular dichroism (CD) or optical rotary dispersion (ORD). However, the imaging of chirality originating from molecular surface films cannot be obtained with these linear optical methods. By using chiral second harmonic generation (C-SHG), with its inherent surface sensitivity and ability to discriminate between the symmetry of surface adsorbed species in combination with a counter-propagating optical geometry, we have developed the first nonlinear chiral microscope. In the study presented here, the intrinsic chirality of R- and S-(+)-1,1'-bi-2-naphthol (RBN, SBN) has been used to image a patterned planar supported lipid bilayer (PSLB) of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) using C-SHG. Spatial resolution of the patterned PSLB is visible when either RBN or SBN is intercalated into the membrane. No image is observed when a racemic mixture of RBN and SBN is present. The C-SHG images are compared with those obtained from fluorescence microscopy to verify the C-SHG imaging technique. The results presented here demonstrate that C-SHG possesses the requisite surface selectivity and sensitivity to detect interfacial chirality and provides a direct route for the visualization of chirality originating from molecular surface films.     

Environmentally “controlled collapse” of the 4f orbital in Cs

Electron-energy loss spectroscopy has been used to investigate excitations near theN ₄₅ edges of Cs metal and Cs oxide at primary electron energiesE _p between 200 and 2000 eV. The fine structures in the spectra show pronounced differences between the metal and the oxide. AtE _p=2000 eV the 4d ⁹ 4f collapsed multiplets and 4d6p like transitions appear with greater intensity in the oxide, and a strong optically allowed component at 93 eV loss energy, which we attribute to a 4d ⁹ 4f ¹ P ₁ ⁰ exciton, is also seen much more clearly. At lowerE _p the non-dipole oscillator strength in the metal is spread over a wider energy range than in the oxide. With the aid of atomic structure calculations these results are interpreted in terms of differential partial collapse of the 4f orbital in the metal and the oxide, due to a combination of reduced screening and ionic potential cage effects.     

Organo-tricyanoborates as tectons: illustrative coordination polymers based on copper(I) derivatives

The first systematic study on the use of tricyanoborates as ligands is presented. The tricyanoborates [RB(CN)3]- (R = oct and Ph) can be prepared by direct cyanation of RBCl2 precursors as well as by thermolysis of the corresponding isocyanides [RB(NC)3]-. The first organo-cyanogallates [RGa(CN)3]- (R = Bu, C6H2-2,4,6-Me3) were prepared from the corresponding dichloride, the structure of Et4N[mesGa(CN3] being confirmed crystallographically. The reaction of equimolar [RB(CN)3]- (R = oct, Ph) and [Cu(MeCN)4]+ afforded two-dimensional polymers [RB(CN)3Cu(NCMe)]. The sheets arise via conjoined hexagonal B3Cu3(CN)6 rings with chair conformations. The reaction of excess [PhB(CN)3]- and [Cu(MeCN)4]+ gives the polymer [K(18-crown-6)]{Cu[PhB(CN)3]2}. Treatment of [PhB(CN)3]- with [Cu(PCy3)2(NCMe)x]PF6 gave the one-dimensional polymer [PhB(CN)3Cu(PCy3)2], wherein two of the three BCN substituents are coordinated.     

Evidence for specific solvation of two halocarbene amides

Laser flash photolysis (LFP, 308 nm) of endo-10-halo-10'-N,N-dimethylcarboxamidetricyclo[4.3.1.0]-deca-2,4-diene (1Cl and 1F) releases indan and halocarbene amide (2Cl and 2F). Although the carbenes are not UV-vis active, they react rapidly with pyridine to form ylides (4Cl, 4F), which are readily detected in LFP experiments (lambda(max) = 450 nm). Dioxane decreases the observed rate of carbene reaction with pyridine in CF(2)ClCFCl(2). Small amounts of THF decrease the observed rate of reaction of carbene 2F with pyridine but increase the rate of reaction of carbene 2Cl with pyridine. LFP (266 nm) of dienes 1Cl and 1F in CF(2)ClCFCl(2) with IR detection produces carbenes 2Cl and 2F with carbonyl vibrations at 1635 and 1650 cm(-1), respectively. In dioxane or THF solvent, LFP produces the corresponding ether ylides (5Cl, 5F) by capture of carbenes 2Cl and 2F. The ylides have broad carbonyl vibrations between 1560 and 1610 cm(-1). The addition of a small amount of dioxane in CFCl(2)CF(2)Cl extends the lifetime of the carbene. This observation, together with the ether-induced retardation of the rates of carbene capture by tetramethylethylene and pyridine, is evidence for solvation of the carbene by dioxane.     

C2-symmetric bis(oxazolinato)lanthanide catalysts for enantioselective intramolecular hydroamination/cyclization

C(2)-symmetric bis(oxazolinato)lanthanide complexes of the type [(4R,5S)-Ph(2)Box]La[N(TMS)(2)](2), [(4S,5R)-Ar(2)Box]La[N(TMS)(2)](2), and [(4S)-Ph-5,5-Me(2)Box]La[N(TMS)(2)](2) (Box = 2,2'-bis(2-oxazoline)methylenyl; Ar = 4-tert-butylphenyl, 1-naphthyl; TMS = SiMe(3)) serve as precatalysts for the efficient enantioselective intramolecular hydroamination/cyclization of aminoalkenes and aminodienes. These new catalyst systems are conveniently generated in situ from the known metal precursors Ln[N(TMS)(2)](3) or Ln[CH(TMS)(2)](3) (Ln = La, Nd, Sm, Y, Lu) and 1.2 equiv of commercially available or readily prepared bis(oxazoline) ligands such as (4R,5S)-Ph(2)BoxH, (4S,5R)-Ar(2)BoxH, and (4S)-Ph-5,5-Me(2)BoxH. The X-ray crystal structure of [(4S)-(t)BuBox]Lu[CH(TMS)(2)](2) provides insight into the structure of the in situ generated precatalyst species. Lanthanides having the largest ionic radii exhibit the highest turnover frequencies as well as enantioselectivities. Reaction rates maximize near 1:1 BoxH:Ln ratio (ligand acceleration); however, increasing the ratio to 2:1 BoxH:Ln decreases the reaction rate, while affording enantiomeric excesses similar to the 1:1 BoxH:Ln case. A screening study of bis(oxazoline) ligands reveals that aryl stereodirecting groups at the oxazoline ring 4 position and additional substitution (geminal dimethyl or aryl) at the 5 position are crucial for high turnover frequencies and good enantioselectivities. The optimized precatalyst, in situ generated [(4R,5S)-Ph(2)Box]La[N(TMS)(2)](2), exhibits good rates and enantioselectivities, comparable to or greater than those achieved with chiral C(1)-symmetric organolanthanocene catalysts, even for poorly responsive substrates (up to 67% ee at 23 degrees C). Kinetic studies reveal that hydroamination rates are zero order in [amine substrate] and first order in [catalyst], implicating the same general mechanism for organolanthanide-catalyzed hydroamination/cyclizations (intramolecular turnover-limiting olefin insertion followed by the rapid protonolysis of an Ln-C bond by amine substrate) and implying that the active catalytic species is monomeric.     

Canady Cold Helios Plasma Reduces Soft Tissue Sarcoma Viability by Inhibiting Proliferation,Disrupting Cell Cycle,and Inducing Apoptosis: A Preliminary Report

Soft tissue sarcomas (STS) are a rare and highly heterogeneous group of solid tumors, originating from various types of connective tissue. Complete removal of STS by surgery is challenging due to the anatomical location of the tumor, which results in tumor recurrence. Additionally, current polychemotherapeutic regimens are highly toxic with no rational survival benefit. Cold atmospheric plasma (CAP) is a novel technology that has demonstrated immense cancer therapeutic potential. Canady Cold Helios Plasma (CHCP) is a device that sprays CAP along the surgical margins to eradicate residual cancer cells after tumor resection. This preliminary study was conducted in vitro prior to in vivo testing in a humanitarian compassionate use case study and an FDA-approved phase 1 clinical trial (IDE G190165). In this study, the authors evaluate the efficacy of CHCP across multiple STS cell lines. CHCP treatment reduced the viability of four different STS cell lines (i.e., fibrosarcoma, synovial sarcoma, rhabdomyosarcoma, and liposarcoma) in a dose-dependent manner by inhibiting proliferation, disrupting cell cycle, and inducing apoptosis-like cell death.     

Electronic structure of strongly correlated systems: recent developments in multiconfiguration pair-density functional theory and multiconfiguration nonclassical-energy functional theory

Strong electron correlation plays an important role in transition-metal and heavy-metal chemistry, magnetic molecules, bond breaking, biradicals, excited states, and many functional materials, but it provides a significant challenge for modern electronic structure theory. The treatment of strongly correlated systems usually requires a multireference method to adequately describe spin densities and near-degeneracy correlation. However, quantitative computation of dynamic correlation with multireference wave functions is often difficult or impractical. Multiconfiguration pair-density functional theory (MC-PDFT) provides a way to blend multiconfiguration wave function theory and density functional theory to quantitatively treat both near-degeneracy correlation and dynamic correlation in strongly correlated systems; it is more affordable than multireference perturbation theory, multireference configuration interaction, or multireference coupled cluster theory and more accurate for many properties than Kohn–Sham density functional theory. This perspective article provides a brief introduction to strongly correlated systems and previously reviewed progress on MC-PDFT followed by a discussion of several recent developments and applications of MC-PDFT and related methods, including localized-active-space MC-PDFT, generalized active-space MC-PDFT, density-matrix-renormalization-group MC-PDFT, hybrid MC-PDFT, multistate MC-PDFT, spin–orbit coupling, analytic gradients, and dipole moments. We also review the more recently introduced multiconfiguration nonclassical-energy functional theory (MC-NEFT), which is like MC-PDFT but allows for other ingredients in the nonclassical-energy functional. We discuss two new kinds of MC-NEFT methods, namely multiconfiguration density coherence functional theory and machine-learned functionals.

This feature article overviews recent work on active spaces, matrix product reference states, treatment of quasidegeneracy, hybrid theory, density-coherence functionals, machine-learned functionals, spin–orbit coupling, gradients, and dipole moments.     

Efficacious and sustained release of an anticancer drug mitoxantrone from new covalent organic frameworks using protein corona

Solid porous and crystalline covalent organic frameworks (COFs) are characterized by their higher specific BET surface areas and functional pore walls, which allow the adsorption of various bioactive molecules inside the porous lattices. We have introduced a perylene-based COF, PER@PDA-COF-1, which acts as an effective porous volumetric reservoir for an anticancer drug, mitoxantrone (MXT). The drug-loaded COF (MXT–PER@PDA-COF-1) exhibited zero cellular release of MXT towards cancer cells, which can be attributed to the strong intercalation between the anthracene-dione motif of the drug and the perylene-based COF backbone. Here, we have introduced a strategy involving the serum-albumin-triggered intracellular release of mitoxantrone from MXT–PER@PDA-COF-1. The serum albumin acts as an exfoliating agent and as a colloidal stabilizer in PBS medium (pH = 7.4), rapidly forming a protein corona around the exfoliated COF crystallites and inducing the sustained release of MXT from the COF into tumorigenic cells.

Solid porous and crystalline covalent organic frameworks (COFs) are characterized by their higher specific BET surface areas and functional pore walls, which allow the adsorption of various bioactive molecules inside the porous lattices.     

Evaluation of Electrospun PCL-PLGA for Sustained Delivery of Kartogenin

In this study, kartogenin was incorporated into an electrospun blend of polycaprolactone and poly(lactic-co-glycolic acid) (1:1) to determine the feasibility of this system for sustained drug delivery. Kartogenin is a small-molecule drug that could enhance the outcome of microfracture, a cartilage restoration procedure, by selectively stimulating chondrogenic differentiation of endogenous bone marrow mesenchymal stem cells. Experimental results showed that kartogenin did not affect the electrospinnability of the polymer blend, and it had negligible effects on fiber morphology and scaffold mechanical properties. The loading efficiency of kartogenin into electrospun membranes was nearly 100%, and no evidence of chemical reaction between kartogenin and the polymers was detected by Fourier transform infrared spectroscopy. Analysis of the released drug using high-performance liquid chromatography–photodiode array detection indicated an abundance of kartogenin and only a small amount of its major hydrolysis product. Kartogenin displayed a typical biphasic release profile, with approximately 30% being released within 24 h followed by a much slower, constant rate of release up to 28 days. Although additional development is needed to tune the release kinetics and address issues common to electrospun scaffolds (e.g., high fiber density), the results of this study demonstrated that a scaffold electrospun from biodegradable synthetic polymers is a suitable kartogenin delivery vehicle.     

The work function of hydrothermally synthesized UO2 and the implications for semiconductor device fabrication

The photoelectric work function of nearly stoichiometric (111) and (100) hydrothermally grown UO₂ was measured to be 6.28 ± 0.36 eV and 5.80 ± 0.36 eV, respectively. Candidate metals for electrical contacts are identified for both rectifying and non‐rectifying contacts based on work function, lattice compatibility, and electrical conductivity.