Color Stabilization of Apulian Red Wines through the Sequential Inoculation of Starmerella bacillaris and Saccharomyces cerevisiae

Mixed fermentation using Starmerella bacillaris and Saccharomyces cerevisiae has gained attention in recent years due to their ability to modulate the qualitative parameters of enological interest, such as the color intensity and stability of wine. In this study, three of the most important red Apulian varieties were fermented through two pure inoculations of Saccharomyces cerevisiae strains or the sequential inoculation of Saccharomyces cerevisiae after 48 h from Starmerella bacillaris. The evolution of anthocyanin profiles and chromatic characteristics were determined in the produced wines at draining off and after 18 months of bottle aging in order to assess the impact of the different fermentation protocols on the potential color stabilization and shelf-life. The chemical composition analysis showed titratable acidity and ethanol content exhibiting marked differences among wines after fermentation and aging. The 48 h inoculation delay produced wines with higher values of color intensity and color stability. This was ascribed to the increased presence of compounds, such as stable A-type vitisins and reddish/violet ethylidene-bridge flavonol-anthocyanin adducts, in the mixed fermentation. Our results proved that the sequential fermentation of Starmerella bacillaris and Saccharomyces cerevisiae could enhance the chromatic profile as well as the stability of the red wines, thus improving their organoleptic quality.     

Density and Volume Properties of the 2-Chloroethanol + 2-Methoxyethanol + 1,2-Dimethoxyethane Ternary Solvent System at Different Temperatures

The density of the 2-chloroethanol (CE) + 2-methoxyethanol (ME) + 1,2-dimethoxye- thane (DME) ternary mixtures has been measured at different temperatures ranging from –10 to 80^°C, and over the entire composition range. The experimental data have been used to check the validity of some relationships accounting for the dependence of the density on temperature and composition domains. Starting from the primary data, some derived quantities, such as excess molar volumes V ^E, partial molar volumes and partial excess molar volumes , have been obtained. In these mixtures, V ^E is always positive for the [CE(1) + ME(2)] binaries, while it is generally negative at all other experimental conditions, showing the greatest deviations along the binary axes corresponding to the binary subsystems in the sequence [CE(1) + DME(2)] < [CE(1) + ME(2)] < [ME(1) + DME(2)]. The results are compared and discussed to in terms of changes in molecular association and structural effects in these solvent systems.     

Tuning the photophysical properties of pyrene-based systems: a theoretical study

Recently new molecular systems based on the pyrene moiety were developed for photovoltaic applications. Here we present the results of a quantum chemical study focused on the effects induced by some different substituents on the electronic properties of pyrene, to obtain general hints for the molecular design of new pyrene-based systems. In particular, a series of electron-donating (hydroxy, amino, acetylamino) and electron-withdrawing (cyano, carbamoyl, formyl, ethynyl, ethenyl) groups were considered. Furthermore, in addition to the single pyrene molecule, two pyrene units linked by ethenylene, ethynylene, 2,5-thienylene, and ethynylene-p-phenylene containing chains of different lengths were taken into account. For all of the model structures presented, the ground state geometries have been optimized using the density functional approach, while the vertical transition energies were calculated using the time-dependent density functional theory. We will show that the tuning of the lowest electronic excitation energy (i.e., the HOMO-LUMO energy gap) as well as the localization of the spatial distributions of the frontier molecular orbitals (i.e., the nature of the electron-hole pair, generated by photon absorption) can be obtained through the analysis of the pyrene frontier molecular orbitals. This approach allows to evaluate the most suitable position of the substituents on the pyrene moiety giving rise to enhanced electronic effects also in function of their electronic nature. In this way, pyrene-structures with tailored electronic properties could be modeled. Our screening shows that promising candidates for photovoltaic applications could be molecular structures formed by two pyrene units joined/linked by a short conjugated bridge containing double or triple bonds (henceforth pyrene-linked dimers). As far as the single pyrene units are considered, the most significant reduction of the transition energy of the lowest optical electronic excitation is obtained with disubstituted pyrenes with push-pull character.     

H,C, N and S stable isotopes and mineral profiles to objectively guarantee the authenticity of grated hard cheeses

In compliance with the European law (EC No. 510/2006), geographical indications and designations of origin for agricultural products and foodstuffs must be protected against mislabelling. This is particularly important for PDO hard cheeses, as Parmigiano Reggiano, that can cost up to the double of the no-PDO competitors.     

Probing the Structure of Lysozyme–Carbon‐Nanotube Hybrids with Molecular Dynamics

Lysozyme has been successfully used to solvate carbon nanotubes (CNT). Extensive molecular dynamics simulations show that 1) a favorite site of adsorption exists, 2) the protein–tube interaction region is located far from the active site, 3) two protein helices act as a tweezer that grips the nanotube, 4) a localized protein re‐arrangement hides the tube from the solvent, and 5) aminic and amidic moieties of lysozyme behave similarly to surfactants in the solvation of the tube.     

Synthesis, structure and conformation of partially-modified retro- and retro-inverso psi[NHCH(CF3)]Gly peptides

Partially modified retro- (PMR) and retro-inverso (PMRI) psi[NHCH(CF(3))]Gly peptides, a conceptually new class of peptidomimetics, have been synthesized in wide structural diversity and variable length by aza-Michael reaction of enantiomerically pure alpha-amino esters and peptides with enantiomerically and geometrically pure N-4,4,4-trifluorocrotonoyl-oxazolidin-2-ones. The factors underlying the observed moderate to good diastereocontrol have been investigated. The conformations of model PMR-psi[NHCH(CF(3))]Gly tripeptides have been studied in solution by (1)H NMR spectroscopy supported by MD calculations, as well as in the solid-state by X-ray diffraction. Remarkable stability of turn-like conformations, comparable to that of parent malonyl-based retropeptides, was evidenced, as a likely consequence of two main factors: 1) severe torsional restrictions about sp(3) bonds in the [CO-CH(2)-CH(CF(3))-NH-CH(R)-CO] module, which is biased by the stereoelectronically demanding CF(3) group and the R side chain; 2) formation of nine-membered intramolecularly hydrogen-bonded rings, which have been clearly detected both in CHCl(3) solution and in some crystal structures. The former factor seems to be more important, as turn-like conformations were found in the solid-state even in the absence of intramolecular hydrogen bonding. The relative configuration of the -C*H(CF(3))NHC*H(R)- stereogenic centers has a major effect on the stability of the turn-like conformation, which seems to require a syn stereochemistry. X-ray diffraction and ab initio computational studies showed that the [-CH(CF(3))NH-] group can be seen as a sort of hybrid between a peptide bond mimic and a proteolytic transition state analogue, as it combines some of the properties of a peptidyl -CONH- group (low NH basicity, CH(CF(3))-NH-CH backbone angle close to 120 degrees, C-CF(3) bond substantially isopolar with the C=O) with some others of the tetrahedral intermediate [-C(OX)(O(-))NH-] involved in the protease-mediated hydrolysis reaction of a peptide bond (high electron density on the CF(3) group, tetrahedral backbone carbon).     

Synthesis of stereo-defined α-trifluoromethyl (Tfm)-malic units

Aldol reactions of titanium enolates of N-acyl-1,3-oxazolidin-2-ones with ethyl trifluoropyruvate occurred with low to good stereoselectivity depending on the steric properties of the N-acyl group. Attempts to transform the resulting aldols into peptidomimetics incorporating stereo-defined α-trifluoromethyl (Tfm)-malic units are described.     

Intramolecular cyclization of acyl radicals onto the azido group: a new radical approach to cyclized lactams

[reaction: see text] Aryl- and alkyl-derived azidoacyl radicals, generated from thiolesters by intramolecular homolytic substitution at the sulfur, can undergo five- and six-membered cyclization onto the azido moiety to give cyclized lactams.