Surface modification of polyethylene fiber by graft polymerization

To improve the wettability and adhesion, graft polymerization of acrylamide (AAm) and glycidyl methacrylate (GMA) was performed onto the surface of ultra-high modulus polyethylene (UHMPE) fiber pretreated with Ar plasma. Following the plasma treatment and the subsequent exposure to air to introduce peroxides onto the fiber surface, graft polymerization onto the UHMPE fiber was allowed to proceed from the polymer peroxides either in deaerated monomer solution at an elevated temperature (degassing method), or in aerated monomer solution containing riboflavin at 30°C under UV irradiation (photoinduction method). The monomer solution was prepared from water and dioxane for AAm and GMA, respectively. After rigorous removal of homopolymers, surface analysis of the grafted fibers was performed with ATR-FTIR and XPS, which revealed that PAAm and PGMA chains were grafted in the surface region of fibers. The grafting rate of PAAm by the photoinduction method was much higher than that by the degassing method when compared at the same concentration of the AAm solution. The amount of PGMA grafted was greatly affected by UV irradiation time, but depended on plasma treatment time to an insignificant extent if the treatment was carried out for longer than 30 s. Reaction of propylamine with the PGMA-grafted surface resulted in the appearance of a nitrogen peak in the XPS spectrum, suggesting the presence of epoxy groups on the surface of PGMA grafted fiber. © 1994 John Wiley & Sons, Inc.     

One-pot synthesis of meridianins and meridianin analogues via indolization of nitrosoarenes

Meridianins, marine alkaloids known as kinase inhibitors with an indole skeleton, and meridianin analogues were produced regioselectively and in moderate to good yields by thermal annulation of nitrosoarenes with 2-amino-4-ethynylpyrimidine and 2-chloro-4-ethynylpyrimidine, respectively, through a novel and atom-economical indolization process.     

New efficient access to fused (Het)Aryltetrahydroindolizinones via N-acyl iminium intermediates

In this paper, we described the preparation of fused (Het)Aryltetrahydroindolizinones via N-acyl iminium intermediates. Two different routes were also explored to achieve the synthesis. The first one consists in the intramolecular reaction of β-hydroxylactams whereas the second route one is an intermolecular condensation between a 2-formylester or a β-alkoxylactone and an appropriate primary amine. We also developed two heterocyclic strategies to obtain the adequate unavailable starting materials in pyridine, pyrazine, quinoline, and quinaxoline series and then perform all inter or intramolecular reactions. Scope and limitations are given.     

Temperature and composition dependence of the refractive indices of the 2-chloroethanol + 2-methoxyethanol binary mixtures

Measurements of the refractive index n for the binary mixtures 2-chloroethanol + 2-methoxyethanol in the 0 < or = t/degree C < or = 70 temperature range have been carried out with the purpose of checking the capability of empirical models to express physical quantity as a function of temperature and volume fraction, both separately and together, i.e., in a two independent variables expression. Furthermore, the experimental data have been used to calculate excess properties such as the excess refractive index, the excess molar refraction, and the excess Kirkwood parameter delta g over the whole composition range. The quantities obtained have been discussed and interpreted in terms of the type and nature of the specific intermolecular interactions between the components.     

Amperometric detection with microelectrodes in flow injection analysis: theoretical aspects and application in the determination of nitrite in saliva

The construction of a wall-jet cell with amperometric detection using a set of disc electrodes whose radii ranged from 5 to 750 mum has been proposed. The influence of some experimental parameters like flow rate and electrode radius on hydrodynamic voltammograms recorded for a 0.5 mmol dm(-3) potassium ferrocyanide solution also containing 0.1 mol dm(-3) KCl has been discussed. Some considerations regarding the current signals obtained from flow injection experiments using both a 5- and a 750-mum radius platinum electrode were carried out in order to achieve the lowest limit of detection, a value of 0.03 mumol dm(-3) ferrocyanide being calculated by using the 5-mum radius microelectrode as amperometric detector. The wall-jet cell has been used in the determination of nitrite in saliva by quantifying the triiodide formed in the reaction of the analyte with excess iodide in acidic medium. A 12.5-mum platinum disc microelectrode maintained at +0.2 V vs. Ag/AgCl was used as amperometric detector. Peaks obtained in fiagrams after injection of diluted saliva to the carrier stream containing 0.1 mol dm(-3) sulphuric acid and 20 mmol dm(-3) potassium iodide were compared to an analytical curve obtained in the same conditions (r(2)=0.997) for a nitrite concentration in the range 1-10 mumol dm(-3). The concentration of nitrite in the saliva sample after the appropriate correction for dilution was found to be 2.3 ppm (0.05 mmol dm(-3)), in a good agreement with results obtained by using a standard spectrophotometric procedure (2.5 ppm). The limit of detection of the method was calculated as 0.2 mumol dm(-3), and the reproducibility was checked by measuring the peak current for 19 injections of 10 muM nitrite, the standard deviation being 3.7%.     

Fixation of Atmospheric Nitrogen: Synthesis of Heterocycles with Atmospheric Nitrogen as the Nitrogen Source

Dry air is the source of molecular nitrogen for reactions with TiL₄, Li, and TMSCl (L = Cl, OiPr; TMS = trimethylsilyl). The nitrogen–titanium complexes thus prepared can be used to synthesize indoles, pyrroles, and lactams from carbonyl compounds. Applying this method to 1 provides access to 2 , the key compound in the synthesis of (±)-lycopodine.     

Synthetic studies on (+)-naphthyridinomycin: stereoselective synthesis of the tetracyclic core framework

[reaction: see text] The stereoselective synthesis of the tetracyclic intermediate 21 for (+)-naphthyridinomycin (1) has been accomplished. The convergent synthesis used the Ugi 4CC reaction with the amine derivative 10. The key features of the stereoselective synthesis of 21 were the intramolecular Mizoroki-Heck reaction, an aromatic-aldehyde cyclization, and a stereoselective hydroboration.     

Microchip capillary electrophoresis with amperometric detection for rapid separation and detection of phenolic acids

A microchip capillary-electrophoresis protocol for rapid and effective measurements of food-related phenolic acids (including chlorogenic, gentisic, ferulic, and vanillic acids) is described. Relevant parameters of the chip separation and amperometric detection are examined and optimized. Under optimum conditions, the analytes could be separated and detected in a 15 mM borate buffer (pH 9.5, with 10% of methanol) within 300 s using a separation voltage of 2000 V and a detection voltage of +1.0 V. Linear calibration plots are observed for micromolar concentrations of the phenolic acid compounds. The negligible sample volumes used in the microchip procedure obviates surface fouling common to amperometric measurements of phenolic compounds. The new microchip protocol offers great promise for a wide range of food applications requiring fast measurements and negligible sample consumption. An application on a commercial red wine was performed with minimal sample preparation and promising results.