Hysteresis of charge tunneling in assemblies of carboxylic acid-modified gold nanoparticles

We report on charge transport measurements through laterally contacted assemblies of Au nanoparticles capped with 11-mercaptoundecanoic acid ligands. Both alternating- and direct-current data indicate that although the nanoparticles behave as electrically isolated metallic islands, there is a significant influence from the nanoparticle environment, indicating the existence of a slow reorganization process linked to charge transport. On the basis of the observation of temperature-dependent hysteresis of charge tunneling, we propose that this process is due to proton transfer between the carboxylic acid tails of the ligands.     

Establishing the synthetic origin of amphetamines by 2H NMR spectroscopy

Nine samples of N-acetyl-3,4-methylenedioxyamphetamine (N-acetyl-MDA), prepared according to the most common synthetic procedures, are submitted to (2)H NMR spectroscopy. The relative deuterium content at the various sites of the molecule is shown to depend on its synthetic history. The technique provides a chemical fingerprint of N-acetyl-MDAs and it can be used to trace back the precursor materials and the synthetic pathways employed in the preparation of the samples.     

Bimodal proton transfer in acid-base reactions in water

We investigate one of the fundamental reactions in solutions, the neutralization of an acid by a base. We use a photoacid, 8-hydroxy-1,3,6-trisulfonate-pyrene (HPTS; pyranine), which upon photoexcitation reacts with acetate under transfer of a deuteron (solvent: deuterated water). We analyze in detail the resulting bimodal reaction dynamics between the photoacid and the base, the first report on which was recently published. We have ascribed the bimodal proton-transfer dynamics to contributions from preformed hydrogen bonding complexes and from initially uncomplexed acid and base. We report on the observation of an additional (6 ps)(-1) contribution to the reaction rate constant. As before, we analyze the slower part of the reaction within the framework of the diffusion model and the fastest part by a static, sub-150 fs reaction rate. Adding the second static term considerably improves the overall modeling of the experimental results. It also allows to connect experimentally the diffusion controlled bimolecular reaction models as defined by Eigen-Weller and by Collins-Kimball. Our findings are in agreement with a three-stage mechanism for liquid phase intermolecular proton transfer: mutual diffusion of acid and base to form a "loose" encounter complex, followed by reorganization of the solvent shells and by "tightening" of the acid-base encounter complex. These rearrangements last a few picoseconds and enable a prompt proton transfer along the reaction coordinate, which occurs faster than our time resolution of 150 fs. Alternative models for the explanation of the slower "on-contact" reaction time of the loose encounter complex in terms of proton transmission through a von Grotthuss mechanism are also discussed.     

Chemical strategies and characterization tools for the organization of single molecule magnets on surfaces

Addressing individual bistable magnetic molecules, known as Single Molecule Magnets (SMMs), is a fascinating goal at the borderline between molecular magnetism and spin electronics. This tutorial review focuses on the first step towards single-molecule experiments, namely the organization of SMMs on surfaces. Both preparation and characterization of surface-supported SMMs prove to be quite demanding and a multidisciplinary approach is necessary, which is described here using selected examples. We first illustrate the chemical strategies devised to assemble SMMs and to control their orientation on surfaces. Then, we present characterization tools, which have been selected on the basis of their relevance to address specific points, i.e. the chemical composition of the deposited SMM films, the organization of the molecules on the surface, the intramolecular arrangement of the spins, the magnetic anisotropy of SMMs, and eventually the dynamics of their magnetization on surfaces. Particular attention is devoted to techniques exploiting synchrotron light.     

Thermal reactions of tributyltin hydride with alpha-azido esters: unexpected intervention of tin triazene adducts under both nonradical and radical conditions

Thermal reaction of various alpha-azido esters with Bu(3)SnH in refluxing benzene results in smooth production of 3-(tributylstannyl)-1-triazene adducts affording cyclized 1,2,3-triazol-4-ones in preference to reduced amines and thence provides a new useful method for the preparation of these triazole derivatives. In the presence of AIBN the occurrence of triazene products still remains important or even exclusive and, consequently, generation of the expected stannylaminyl radicals is seriously limited. With 2-azidomalonates and alpha-azido-beta-keto esters stannyltriazenes can similarly occur in the absence of the radical initiator, but in the latter cases the ensuing triazenes undergo preferential cyclization onto the ketone moiety to give reactive hydroxytriazolines. Contrary to alpha-azido esters, in the presence of AIBN alpha-azido-beta-keto esters as well as azidomalonates give rise only to the usual stannylaminyl radicals. A possible explanation for the different behavior of the mono- and dicarbonyl azides in the presence of AIBN is put forward.     

On the Effects of UV‐C and pH on the Mechanical Behavior,Molecular Conformation and Cell Viability of Collagen‐Based Scaffold for Vascular Tissue Engineering

Collagen‐based vascular substitutes represent in VTE a valid alternative for the replacement of diseased small‐calibre blood vessels. In this study, collagen gel‐based scaffolds were crosslinked combining modulation of pH and UV‐C radiation. The effects on the mechanical properties, on the molecular structure and on cell viability and morphology were investigated. The mechanical response increased as a function of pH or UV‐C dose and strongly depended on the test speed. Collagen molecular conformation resulted only slightly modified. While cell adhesion was not significantly altered, cell proliferation partially decreased in function of pH and UV‐C. These findings suggest that UV‐C treated collagen gels can represent an adequate substrate for VTE applications.

     

Isomerism in rhodium(I) N,S-donor heteroscorpionates: ring substituent and ancillary ligand effects

The heteroscorpionate ligands [HB(taz)(2)(pz(R))](-) (pz(R) = pz, pz(Me2), pz(Ph)) and [HB(taz)(pz)(2)](-), synthesised from the appropriate potassium hydrotris(pyrazolyl)borate salt and 4-ethyl-3-methyl-5-thioxo-1,2,4-triazole (Htaz), react with [{Rh(cod)(μ-Cl)}(2)] to give [Rh(cod)Tx] {Tx = HB(taz)(2)(pz), HB(taz)(2)(pz(Me2)), HB(taz)(2)(pz(Ph)), HB(taz)(pz)(2)}; the heteroscorpionate rhodaboratrane [Rh{B(taz)(2)(pz(Me2))}{HB(taz)(2)(pz(Me2))}] is the only isolable product from the reaction of [{Rh(nbd)(μ-Cl)}(2)] with K[HB(taz)(2)(pz(Me2))]. Carbonylation of the cod complexes gave a mixture of [Rh(CO)(2)Tx] and [(RhTx)(2)(μ-CO)(3)] which reacts with PR(3) to give [Rh(CO)(PR(3))Tx] (R = Cy, NMe(2), Ph, OPh). In the solid state the complexes are square planar with the particular structure dependent on the steric and/or electronic properties of the scorpionate and ancillary ligands. The complex [Rh(cod){HB(taz)(pz)(2)}] has the heteroscorpionate κ(2)[N(2)]-coordinated to rhodium with the B-H bond directed away from the rhodium square plane while [Rh(cod){HB(taz)(2)(pz(Me2))}] is κ(2)[SN]-coordinated, with the B-H bond directed towards the metal. The complexes [Rh(CO)(PPh(3)){HB(taz)(2)(pz)}] and [Rh(CO)(PPh(3)){HB(taz)(2)(pz(Me2))}] are also κ(2)[SN]-coordinated but with the pyrazolyl ring cis to PPh(3); in the former the B-H bond is directed towards rhodium while in the latter the ring is pseudo-parallel to the rhodium square plane, as also found for [Rh(CO)(2){HB(taz)(2)(pz(Me2))}]. The analogues [Rh(CO)(PR(3)){HB(taz)(2)(pz(Me2))}] (R = Cy, NMe(2)) have the phosphines trans to the pyrazolyl ring. Uniquely, [Rh(CO)(PPh(3)){HB(taz)(2)(pz(Ph))}] is κ(2)[S(2)]-coordinated. A qualitative mechanism is given for the rapid ring-exchange, and hence isomerisation, observed in solution.     

Light‐Powered Self‐Healable Metallosupramolecular Soft Actuators

Supramolecular functional materials able to respond to external stimuli have several advantages over their classical covalent counterparts. The preparation of soft actuators with the ability to respond to external stimuli in a spatiotemporal fashion, to self‐repair, and to show directional motion, is currently one of the most challenging research goals. Herein, we report a series of metallopolymers based on zinc(II)–terpyridine coordination nodes and bearing photoisomerizable diazobenzene units and/or solubilizing luminescent phenylene–ethynylene moieties. These supramolecular polymers act as powerful gelating agents at low critical gelation concentrations. The resulting multiresponsive organogels display light‐triggered mechanical actuation and luminescent properties. Furthermore, owing to the presence of dynamic coordinating bonds, they show self‐healing abilities.     

A Bis(Diphosphanyl N‐Heterocyclic Carbene) Gold Complex: A Synthon for Luminescent Rigid AuAg2 Arrays and Au5 and Cu6 Double Arrays

A mononuclear bis(NHC)/Au^I (NHC=N‐heterocyclic carbene) cationic complex with a rigid bis(phosphane)‐functionalized NHC ligand (PC_NHCP) was used to construct linear Au₃ and Ag₂Au arrays, a Au₅ cluster with two intersecting crosslike Au₃ arrays, and an unprecedented Cu₆ complex with two parallel Cu₃ arrays. The impact of metallophilic interactions on photoluminescence was studied experimentally.