Magnetic field effects on the crystal orientation and surface morphology of electrodeposited iron films

The effects of a magnetic field (5 T) on crystal orientation and surface morphology were investigated for iron films electrodeposited in ferrous aqueous solution. XRD measurements for the iron films showed that the preferred orientation parallel to the substrate was determined by the current density and not influenced by the magnetic field. By X-ray pole figure measurements, however, the crystal texture of the iron films electrodeposited at 10 mA cm^–2 and 30 mA cm^–2 was found to be controlled by the magnetic field. That is, the (110) planes were orientated in same direction of the magnetic field vector at angles of 30° and 35° to the direction normal to the substrate plane at 10 mA cm^–2 and 30 mA cm^–2, respectively. When the morphology was observed by SEM, iron grains at 30 mA cm^–2 changed from a triangular pyramid shape at 0 T to a complex star-like shape at 5 T.Presented at the 3rd International Symposium on Electrochemical Processing of Tailored Materials held at the 53rd Annual Meeting of the International Society of Electrochemistry, 15–20 September 2002, Düsseldorf, Germany     

Magnetic circular dichroism of theA andB bands in KI:Ga+, KI:In+, and KI:Sn2+

Magnetic circular dichroism (MCD) of theA- andB-absorption band region has been obtained at 4.2 K and 50 kG in KI:Ga⁺, KI:In⁺, and KI:Sn²⁺. The MCD spectra indicate the complex nature of these bands more clearly than the absorption spectra themselves do. TheA-band MCD consists in all cases of a positive and a negative part reflecting the structure of the absorption band. TheB-band MCD shows three peaks, two positive peaks at 4.34 and 4.41₅ eV (4.09 and 4.17₅ eV) and a negative peak at 4.38 eV (4.12₅ eV) in KI:Ga⁺ (KI:In⁺). TheB-band in KI:Sn²⁺ consists of a shoulder (b ₀) at 3.76 eV and a main band which has at least 5 sub-peaks (b ₁~b ₅) at 3.82₁, 3.84₁, 3.86₁, 3.88₀, and 3.89₅ eV; each of the subpeaks (b ₁~b ₅) gives a derivative-like MCD.The MCD shape functionf() for the transitiona _1g ² a _1g t _1u has been obtained for one set of parameter values by using the classical Franck-Condon approximation and the Monte Carlo integration method. The result can explain the observed salient features of theB- as well asA-band MCD's, indicating the validity of the Franck-Condon approximation and the interaction mode coordinates.     

Ultrasonic butt welding of aluminum,aluminum alloy and stainless steel plate specimens

Welding characteristics of aluminum, aluminum alloy and stainless steel plate specimens of 6.0 mm thickness by a 15 kHz ultrasonic butt welding system were studied. There are no detailed welding condition data of these specimens although the joining of these materials are required due to anticorrosive and high strength characteristics for not only large specimens but small electronic parts especially. These specimens of 6.0 mm thickness were welded end to end using a 15 kHz ultrasonic butt welding equipment with a vibration source using eight bolt-clamped Langevin type PZT transducers and a 50 kW static induction thyristor power amplifier. The stainless steel plate specimens electrolytically polished were joined with welding strength almost equal to the material strength under rather large vibration amplitude of 25 microm (peak-to-zero value), static pressure 70 MPa and welding time of 1.0-3.0 s. The hardness of stainless steel specimen adjacent to a welding surface increased about 20% by ultrasonic vibration.     

High-performance optical code generation and recognition by use of a 511-chip, 640-Gchip/s phase-shifted superstructured fiber Bragg grating

The generation and recognition of a record-length 511-chip optical code is experimentally demonstrated by use of a superstructured fiber Bragg grating (SSFBG) with a chip rate of 640 Gchips/s. Very high reflectivity (92%) is achieved with high-quality correlation properties. The temperature deviation tolerance is approximately +/- 0.3 degrees C, which is within the package's temperature stability range (+/- 0.1 degrees C). Experimental results show good agreement with the theory. They indicate the SSFBG's potential for processing a long optical code with an ultrahigh chip rate, which could significantly improve the system's performance.     

HELFIT: Helix fitting by a total least squares method

The problem of fitting a helix to data arises in analysis of protein structure, in nuclear physics, and in engineering. A continuous helix is described by five parameters: helix axis, helix radius, and helix pitch. One of these helix parameters is frequently predefined in the helix fitting. Other algorithms find only the helix axis or determine separately the helix axis, the helix radius, or the helix pitch. Here we describe a total least squares method, HELFIT, for helix fitting. HELFIT enables one to calculate simultaneously all five of the helix parameters with high accuracy. The minimum number of data points required for the analysis is only four. HELFIT is very insensitive to noise even in short helices. HELFIT also calculates a parameter, p = rmsd/(N − 1)^1/2, which estimates the regularity of helical structures independent of the number of data points, where rmsd is the root mean square distance from the best-fit helix to data points and N is the number of data points. It should become a basic tool of structural bioinformatics.     

Determination of orthophthalaldehyde in air using 2,4-dinitrophenylhydrazine-impregnated silica cartridge and high-performance liquid chromatography

A new method is described for the determination of orthophthalaldehyde in air which is used for the disinfection of various instruments (e.g. endoscopes) in hospital. Orthophthalaldehyde in air was collected with a silica gel cartridge impregnated with acidified 2,4-dinitrophenylhydrazine (DNPH-cartridge) and derivatives were analyzed by high-performance liquid chromatography (HPLC). In this study, the derivatization was examined by comparing the process with three phthalaldehyde isomers (ortho-, iso- and tere-). In the case of iso- and tere-phthalaldehyde, derivatives synthesized with excess of aldehyde consisted mainly of mono-derivatives, and derivatives synthesized with excess of DNPH consisted mainly of bis-derivative. In the case of orthophthalaldehyde, derivative consisted of only bis-derivative and mono-derivative was never observed under any conditions. Orthophthalaldehyde was completely retained by the DNPH-cartridge during air sampling, however, the derivatization reaction was incomplete and unreacted orthophthalaldehyde was flushed from the cartridge during the subsequent solvent extraction process. Unreacted orthophthalaldehyde and DNPH reacted again in the extraction solvent solution. Immediately after the solvent extraction, both mono- and bis-DNPhydrazone derivatives of orthophthalaldehyde were present in the solution. However, over time, the mono-derivative decreased and bis-derivative increased until only the bis-derivative was left allowing accurate determination of the orthophthalaldehyde concentration. The transformation of mono-derivative to bis-derivative was faster in polar aprotic solvents such as acetonitrile, dimethyl sulfoxide and ethyl acetate. Transformation was found to occur most quickly in acetonitrile solvent and was completed in 4 h in this case. It was possible to measure orthophthalaldehyde in air as bis-derivative using a DNPH impregnated silica cartridge and HPLC analysis.     

Measurement of acid-catalyzed isomerization of unsaturated aldehyde-2,4-dinitrophenylhydrazone derivatives by high-performance liquid chromatography analysis

Aldehyde-2,4-dinitrophenylhydrazones exist as (E)- and (Z)-geometrical isomers, and adventitious isomerization during sample preparation can cause analytical errors. Purified alkenal-2,4-dinitrophenylhydrazone derivatives comprise only the (E)-isomer. However, partial isomerization to the (Z)-isomer occurs upon addition of acid to attain an equilibrium isomer ratio. The UV-visible spectral properties of the isomers differ; the (Z)-isomer exhibiting a 6-10 nm lower absorption maximum compared to the (E)-isomer. Alkenal-2,4-dinitrophenylhydrazones having a CC double bond at the 2- or 3-position of the alkenal exhibited similar absorption maxima with an equilibrium isomer ratio (0.035) that was much lower than those of other alkenals. The CC double bond at the 3-position migrates to a position of conjugation with the CN double bond during hydrazone synthesis to form a stabilized molecular structure. Alkenal-2,4-dinitrophenylhydrazones having a double bond at the 4-position or greater exhibited a similar absorption maxima equilibrium isomer ratio (0.14) to alkanal-2,4-dinitrophenylhydrazones. The quantitative analysis of carbonyl compounds in air or water using DNPH is usually conducted in the presence of an acid catalyst. Consequently, the solution of the direct extract prepared for HPLC or GC analysis contains both (E)- and (Z)-isomers.     

Observation of bubble layer formed on hydrogen and oxygen gas-evolving electrode in a magnetic field

The evolution of hydrogen and oxygen gasses in a 0.36-M KOH electrolyte was observed in a magnetic field, and the void fraction was calculated by a hydrodynamic model. Both gasses evolving on a platinum working electrode formed a bubble layer which increased the ohmic resistance. In addition to natural convection, magnetohydrodynamic (MHD) convection in a magnetic field improved the electrolytic conductivity by supplying a fresh solution (pumping effect) and removing gas bubbles. The MHD convection reduced the void fraction of hydrogen gas more than that of oxygen, which can be explained by the poor wettability of the oxygen evolving electrode.     

Copper(II)-catalyzed oxidation of d-alpha-tocopherol by oxygen in aqueous solution

alpha-Tocopherol (alpha-Toc) was solubilized in aqueous solutions using 13 solubilizing agents and the products of oxidation by oxygen in the presence and the absence of Cu(II) were analyzed by HPLC. In the presence of Cu(II), the oxidation was accelerated and 5-formyl-7,8-dimethyltocol and alpha-tocoquinone were the major oxidation products. Their yields greatly increased in the presence of Cu(II). The yields and the rates of formation of the products were dependent on the properties of solubilizing agents and other conditions as well as the presence of Cu(II) or other metal ions. It is suggested that slight changes in the structure of the solubilizing agents affect the course of the reaction.