Air-stable, room-temperature emissive disilenes with π-extended aromatic groups

π-Conjugated disilenes with 2-naphthyl or 2-fluorenyl groups on the silicon atoms have been synthesized as air-stable emissive red solids using the bulky 1,1,3,3,5,5,7,7-octaethyl-s-hydrindacen-4-yl (Eind) groups. The strong π-π* absorptions and distinct emission at room temperature, both in solution and in the solid state, have been observed due to the substantial contribution of the 3p(π)*(Si-Si)-2p(π)*(carbon π-electron system) conjugation.     

Effect of chemical crosslinking on mechanical and electrical properties of ultrahigh-molecular-weight polyethylene-carbon fiber blends prepared by gelation/crystallization from solutions

In an attempt to improve the mechanical property of polyethylene composite at high temperature, crosslinking of ultrahigh-molecular-weight polyethylene (UHMWPE) and carbon fiber (CF) blends was carried out by using dicumyl peroxide (DCP). The specimens were prepared by gelation/crystallization from solutions. The effect of chemical crosslinking on mechanical and electrical properties of UHMWPE/CF blends with composition of 1/0, 1/0.25, and 1/1 (w/w) were investigated in detail. Electrical conductivity and thermal mechanical properties of the blends with the 1/1 composition were greatly improved by incorporation of enough content of CF and adequate crosslinking network formation. Surprisingly, the Young’s modulus of the 1/1 blend reached 20 GPa at room temperature (20 °C). On the other hand, heat treatment at 135 °C played an important role for obtaining a high PTC effect for the UHMWPE-CF blend in which the PTC intensity reached 10⁷.     

Reductive Benzylation of Dimetallo Hexaaryl[70]Fullerenes on the Equatorial Region

Dianions of dimetallic hexa(organo)[70]fullerene [(C₅R₅)₂Ru₂C₇₀Ar₆]^2? (R=H, Me; Ar=Ph, 4‐MeC₆H₄, 4‐tBuC₆H₄) react with benzylic bromide to yield the dibenzylated product dimetallic octa(organo)[70]fullerene (C₅R₅)₂Ru₂C₇₀Ar₆(CH₂Ar′)₂ (Ar′=Ph, 4‐MeO₂CC₆H₄), where the benzylic groups are attached to the equatorial belt region of [70]fullerene; this region is generally considered to be rather unreactive. This unusual structure was unambiguously determined by X‐ray crystallography. Theoretical studies on the electronic properties of the monoanionic intermediate indicated that the highest spin density resides on the two carbon atoms in the belt region; one of them then couples with a benzylic radical to yield the octa(organo)fullerene product after ionic substitution of the fullerene anion with a benzylic bromide. Electrochemical analysis of the hexa(organo) and octa(organo) ruthenium complexes suggests that the modification of the belt region does not affect the electronic communication between the two metal centers.     

Selective and sensitive fluorometric determinations of cobalt(II) and hydrogen peroxide with fluorescein-hydrazide

Fluorophotometric determinations of cobalt(II) and hydrogen peroxide were investigated by using the fluorescence reaction between fluorescein-hydrazide (fl-NHNH(2)), and/or hydrogen peroxide, cobalt(II), respectively. The calibration graphs were liner in the range of 0-6.0 ng cobalt(II) and 0-1000 ng hydrogen peroxide per 10 ml at an emission wavelength (E(m)) of 530 nm with an exicitation wavelength (E(x)) of 508 nm, respectively. These proposed methods were selective and simple, and the effect of foreign ions was negligible in comparison with conventional reported methods such as nitroso R,4-(2-pyridylazo)resorcinol(PAR), alizarin, pyridine-2-aldehyde-2-pyridinehydrazone, stilbazo-cobalt(II), etc.     

Convenient synthesis of 2-(2-pyridyl)-1, 3-diaminopropane,and its copper(II), nickel(II), and cobalt(III) complexes

Summary 2-(2-Pyridyl)-1, 3-propanediol was converted into the diacetate, which was then condensed with phthalimide. The product was hydrolyzed with hydrochloric acid to give 2-(2-pyridyl)-1, 3-diaminopropane. The free amine gave 12 complexes with copper(II), nickel(II), and cobalt(III), which were characterized spectroscopically and magnetically. Features of the amine as a ligand are discussed. A few related complexes were also studied.     

Iron speciation related to color of Jurassic sedimentary rocks in Turpan Basin, northwest China

Mesozoic-Cenozoic reddish and green beds are widely distributed in northwest China. Mössbauer spectroscopy revealed that the composition of iron species varies with color in the middle-upper Jurassic sedimentary rocks from the Turpan Basin. Three main kinds of iron species were identified: (1) ferric iron of hematite (hem-Fe³⁺), (2) paramagnetic ferric iron (para-Fe³⁺), and (3) paramagnetic ferrous iron (para-Fe²⁺). Pyrite iron (pyr-Fe²⁺) was revealed only in a few samples. In general, there is a direct correlation between rock color, iron species and total iron content, however, in detail, this relationship is more complicated. The reddish rocks contain higher contents of total iron and hem-Fe³⁺, whereas the gray rocks contain much more para-Fe²⁺. However, relatively low hematite content cannot give red color to rocks, probably due to suppression by other pigments such as organic matter in black or chlorite in green. The dark or green rocks normally contain either only paramagnetic Fe²⁺ and paramagnetic Fe³⁺ species or these two species associated with hematite Fe³⁺, but the relative content of hematite species is lower. The variations of different iron species control lithological properties such as color and also may reflect the sedimentary conditions. Moreover, iron speciation in these rocks is one of the main factors, which result the color features of rocks in remote sensing imagery.This revised version was published online in November 2005 with corrections to the Cover Date.     

Ligand binding properties of myoglobin reconstituted with iron porphycene: unusual O2 binding selectivity against CO binding

Sperm whale myoglobin, an oxygen storage hemoprotein, was successfully reconstituted with the iron porphycene having two propionates, 2,7-diethyl-3,6,12,17-tetramethyl-13,16-bis(carboxyethyl)porphycenatoiron. The physicochemical properties and ligand bindings of the reconstituted myoglobin were investigated. The ferric reconstituted myoglobin shows the remarkable stability against acid denaturation and only a low-spin characteristic in its EPR spectrum. The Fe(III)/Fe(II) redox potential (-190 mV vs NHE) determined by the spectroelectrochemical measurements was much lower than that of the wild-type. These results can be attributed to the strong coordination of His93 to the porphycene iron, which is induced by the nature of the porphycene ring symmetry. The O2 affinity of the ferrous reconstituted myoglobin is 2600-fold higher than that of the wild-type, mainly due to the decrease in the O2 dissociation rate, whereas the CO affinity is not so significantly enhanced. As a result, the O2 affinity of the reconstituted myoglobin exceeds its CO affinity (M' = K(CO)/K(O2) < 1). The ligand binding studies on H64A mutants support the fact that the slow O2 dissociation of the reconstituted myoglobin is primarily caused by the stabilization of the Fe-O2 sigma-bonding. The IR spectra for the carbon monoxide (CO) complex of the reconstituted myoglobin suggest several structural and/or electrostatic conformations of the Fe-C-O bond, but this is not directly correlated with the CO dissociation rate. The high O2 affinity and the unique characteristics of the myoglobin with the iron porphycene indicate that reconstitution with a synthesized heme is a useful method not only to understand the physiological function of myoglobin but also to create a tailor-made function on the protein.     

Thallium selenate (Tl2SeO4) in a paraelastic phase by X‐ray powder diffraction

The structure of thallium selenate, Tl₂SeO₄, in a paraelastic phase (above 661 K) has been analysed by Rietveld analysis of the X‐ray powder diffraction pattern. Atomic parameters based on the isomorphic K₂SO₄ crystal in the paraelastic phase were used as the starting model. The structure was determined in the hexagonal space group P6₃/mmc, with a = 6.2916 (2) Å and c = 8.1964 (2) Å. From the Rietveld refinement it was found that two orientations are possible for the SeO₄ tetrahedra, in which one of their apices points randomly up and down with respect to [001]. One Tl atom lies at the origin with symmetry, the other Tl and one of the O atoms occupy sites with 3m symmetry, the Se atom is at a site with symmetry and the remaining O atom is at a site with m symmetry. Furthermore, it was also found that the Tl atoms display anomalously large positional disorder along [001] in the paraelastic phase.