Zero-point vibration of hydrogen adsorbed on Si and Pt surfaces

Hydrogen atoms adsorbed on Si(111) and Pt(111) were investigated by nuclear reaction analysis (NRA) using 1H(15N,alphagamma)12C. From measurements of the NRA spectrum at normal and tilted ion incidences the zero-point vibrational energies of H on Si(111) in the perpendicular and parallel directions were found to be 123.4+/-4.6 and 44.6+/-6.2 meV, respectively, which are consistent with harmonic potentials. The zero-point energies obtained for Pt(111)-H were 80.8+/-3.9 and 62.1+/-6.0 meV for perpendicular and parallel directions, respectively. These results indicate that the stretching mode is harmonic, while the bending mode is strongly anharmonic.     

Holographic window for solar power generation

A new photovoltaic generation unit based on the application of holographic technologies called a Holo-Window is proposed in this work. The basic principle and the optical configuration used for the basic experimental unit are described. Suitable fabrication technology for a hologram with the broadband spectrum required to provide the appropriate sunlight capture capability is then discussed. Finally, a laboratory-prototype Holo-Window unit was developed and its performance was evaluated.     

Optimum Temporal Pulse Shape of Launched Light for Optical Time Domain Reflectometry Type Sensors Using Brillouin Backscattering

We investigated numerically the relationship between the temporal shape of an optical pulse launched into an optical fiber and the power spectrum of the Brillouin backscattered light it produces. We analyzed the measurement error of the peak-power frequency of the Brillouin backscattered light power spectra obtained from the launched light with various pulse shapes. In this investigation and analysis, we characterized the pulse shape by the width, leading-trailing time, and steepness. Regardless of the launched pulse shape, the peak-power frequency-measurement error increases as the pulse width shortens. For identical launched pulse widths, a triangular pulse generates the Brillouin backscattered-light power spectrum with both the narrowest profile and the largest peak power, and consequently provides the minimum error when we measure the peak-power frequency. This shows that a temporally triangular pulse is the best for the launched light.     

Mid-infrared supercontinuum generation in a four-hole As2S5 chalcogenide microstructured optical fiber

We demonstrate the supercontinuum (SC) generation in a four-hole As₂S₅ chalcogenide microstructured optical fiber (MOF) experimentally. The As₂S₅ glass has better property of transmission than As₂S₃ glass in the visible range. The four-hole As₂S₅ MOF is fabricated by a rod-in-tube method. The SCs generated by different pump wavelengths at 2,000, 2,300 and 2,500 nm in the MOF whose length is from 2.3 to 20 cm are demonstrated. Those pump wavelengths correspond to the chromatic dispersion wavelength in the normal chromatic dispersion region, the anomalous chromatic dispersion region close to zero-dispersion wavelength (ZDW) and the anomalous chromatic dispersion region far from ZDW, respectively. Wider SCs can be obtained when pumped at a wavelength in the anomalous dispersion region close to ZDW. The widest SC range of 4,280 nm (from 1,370 to 5,650 nm) covering two octaves was obtained in a 4.8-cm-long fiber pumped at 2,300 nm.     

A nanoscale understanding of the adhesion of polybutylene terephthalate on aluminum

The adhesion strength of polybutylene terephthalate (PBT) on aluminum was investigated using density functional theory-based total energy calculations. Aluminum atom was connected to a PBT monomer at different orientations and total energies were calculated in order to determine the most stable orientation. The energy differences showed that the Al oriented at 180° with the ester group of the monomer bonded strongly. Using this orientation, the PBT monomer-adhesion on aluminum surface and the aluminum atom adhesion on PBT bulk were also investigated.     

Holographic vibration measurements of rough surfaces using a LCSLM

This paper describes measurements of a vibrating object with rough surface by the time-averaged method of holography using a newly designed optically addressed liquid crystal spatial light modulator with a resolution of 102 lp/mm and a diffraction efficiency of 16%. An object vibrating faster than several tens of Hz could be visualized. The pattern obtained by the method provides the locus of vibrating nodes. The advantage of this method is that a high contrast pattern of a vibrating object can be imaged in near-real-time, although the sensitivity of vibration is decreased.     

Development of highly potent chiral discrimination methods that solve the problems of the diastereomer method

The development of highly potent chiral discrimination methods that solve the problems of the diastereomer method, in which it is impossible to discriminate the diastereomers having chiral centers separated by more than four bonds, is described. On the basis of the results obtained, a new hypothesis, Induced Chiral Fields that the achiral reversed phase can provide chiral fields depending on the structures of the eluents, is proposed to explain the significant results of separation of the diastereomers derived from newly developed chiral and fluorescent labeling reagents and optical isomers by reversed-phase HPLC, which was hitherto impossible.