Polymerization of allyl esters of unsaturated acids. V. Cyclopolymerization of methyl allyl fumarate

The kinetics of radical polymerization of methyl allyl fumarate (MAF) is discussed in terms of cyclopolymerization and compared with the polymerization results of methyl allyl maleate (MAM) as a cis isomer. In the polymerization of MAF, the rate and degree of polymerization were quite enhanced compared with MAM, and gelation occurred at low conversion. The content of the unreacted allylic double bonds of the MAF polymer was quite large; whereas those of the unreacted fumaric double bonds and the cyclic structural units showed reverse tendencies. Only a slight presence of a five-membered ring was observed in the MAF polymer. The cyclization constants K_A and K_V, the ratios of the rate constants of the unimolecular cyclization reaction to those of the bimolecular propagation reaction of the uncyclized allylic and fumaric radicals, were estimated to be 2.73 and 1.48 mole/liter, respectively. These values suggest the great difference in the cyclopolymerization behavior between two isomeric monomers. These results are discussed in detail in connection with the high reactivity of the fumaric double bond compared to the maleic double bond. In addition, the formation mode and the sequence distribution of the structural units of the polymer produced are discussed on the basis of these analytical results. Thus, for the MAF polymer obtained in the bulk polymerization, about 60% of the cyclic structure can be formed via the intramolecular attack of the uncyclized fumaric radical on the allylic double bond, as opposed to the case of MAM via the predominant intramolecular attack (ca. 90%) of the uncyclized allylic radical on the maleic double bond; these results and the low probability for the succession of cyclic structures and the rather high probability of a vinyl-to-vinyl addition are presented.     

Carbon dioxide fixation by microalgae photosynthesis using actual flue gas discharged from a boiler

To mitigate CO₂ discharged from thermal power plants, studies on CO₂ fixation by the photosynthesis of microalgae using actual exhaust gas have been carried out. The results are as follows.

Synthesis and nanostructure of strong polyelectrolyte brushes in amphiphilic diblock copolymer monolayers on a water surface

We synthesized an ionic amphiphilic diblock copolymer, poly(hydrogenated isoprene)-b-poly(styrenesulfonic acid) (PIp-h2-b-PSS), by living anionic polymerization, and the nanostructure of its monolayer spread on a water surface was directly investigated by the in situ X-ray reflectivity technique. The monolayer of the diblock copolymer on a water surface had a smooth hydrophobic PIp-h2 layer on water and a "carpet"/polymer brush double layer in a hydrophilic sodium polystyrene sulfonate (PSSNa) layer under the water. The surface pressure dependence and PSSNa chain length dependence of the PIp-h2 layer thickness and the brush nanostructure were quantitatively studied. The effect of salt concentration in the subphase was also investigated in aqueous solutions containing 0-2 M NaCl. The salt effect on monolayer structure occurred at around 0.2 M. The thickness of the PSS brush layer decreased at salt concentrations above 0.2 M, while no structural change was observed below 0.2 M. This critical salt concentration is thought to be related to the balance of ionic concentrations inside the brush and in bulk solution.     

Separation of stereoisomers of some terpene derivatives by capillary gas chromatography-mass spectrometry and high-performance liquid chromatography using beta-cyclodextrin derivative columns

Gas chromatographic separations of the stereoisomers of menthol derivatives, important intermediates in the synthesis of physiologically active natural products, were carried out on several substituted beta-cyclodextrin (CD) columns, including per-O-methyl-beta-cyclodextrin (PME-beta-CD), heptakis(2,3-di-O-acetyl-6-tert-butyldimethylsilyl)-beta-CD (DIAC-6-TBDS-beta-CD), and heptakis(2,3-di-O-methyl-6-tert-butyldimethylsilyl)-beta-CD (DIME-6-TBDS-beta-CD) as chiral stationary phases (CSPs). With the DIME-6-TBDS-beta-CD column, a separation of the Z- and E-isomers of methylidenementhol was accomplished; no separation was achieved with the other columns. The stereoisomers of methylidenementhol and the corresponding tert-butyldimethylsilyl (TBS) ether were separated on both the beta-CD and the heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin (TME-beta-CD) columns by high-performance liquid chromatography (HPLC) with a mobile phase involving acetonitrile and H(2)O. For the separation of the Z- and E-isomers of methylidenementhol, the TME-beta-CD column was superior. In contrast, the beta-CD column was preferable in the case of the corresponding TBS ether.     

Crystallization in low-energy deposition of titanium ions

To investigate crystallization in the ion beam deposition process, titanium ions were deposited on silicon wafers at 105 and 55 eV. As titanium is an active metal, titanium compounds are formed by absorbing backfilled or residual gas. At energy levels of 105 or 55 eV, titanium crystallizes in a NaCl-type titanium compound with the backfilling of air. In all samples, (110)-oriented crystals grew with a rectangular lattice arrangement of titanium atoms. The open channel <110> of preferentially oriented crystal growth was parallel to the direction of incident ions normal to the substrate surface.     

One-step furan ring formation: Synthesis of furo[3,2-h]quinolones

The one-pot reaction of ethyl 1-cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxoquinoline-3-carboxylate ( 6 ) with tert-butyl acetoacetate gave 3-tert-butyl 7-ethyl 9-cyclopropyl-4-fluoro-6,9-dihydro-2-methyl-6-oxofuro[3,2-h]quinoline-3,7-dicarboxylate ( 5 ). This regioselective cyclization was rationalized by the Hard and Soft Acids and Bases principle. By use of a similar furan-forming reaction, we prepared 2-(amino-methyl)furo[3,2-h]quinoline-7-carboxylic acid 4 . Compound 4 showed weak antibacterial activity.     

Fluoride-induced chemiluminescent decomposition of dioxetanes bearing a siloxyaryl moiety to produce an alkyl aryl ketone as an emitter

Tetrabutylammonium fluoride induces the decomposition of 1-tert-butyl-4,4-dimethyl-5-(3-siloxyphenyl)-2,6,7-trioxabicyclo[3.2.0]heptane (4a) in DMSO to form an oxyanion of aromatic ketone (14a) as an emitter with high singlet-chemiexcitation yield comparable with that for a chemically initiated electron exchange luminescence (CIEEL) active dioxetane producing an oxyanion of aromatic ester as an emitter. A 7-siloxynaphthalen-2-yl analog (4b) was found on similar treatment to emit light with the maximum wavelength the longest among CIEEL-active dioxetanes hitherto known.     

Dual-Phase structure of polymer electrolytes comprised of NBR/SBR latex films swollen with lithium salt solution

Dual-phase polymer electrolytes (DPE) that have high ionic conductivity (> 10^?3 S/cm) and good mechanical strength were prepared by mixing NBR and SBR latices and casting films. The latex films absorbed large quantities of lithium salt solution (e.g., 1M lithium perchlorate in γ-butyrolactone) to obtain DPE films but did not dissolve with swelling. The NBR phase is polar and was impregnated selectively with the polar lithium salt solution, whereas the SBR phase is nonpolar and formed a mechanically-supportive matrix. Transmission electron microscopic (TEM), electron energy loss spectral (EELS), and energy-dispersive x-ray (EDX) analyses showed microscopically the dual-phase structure. Evidence for swelling by lithium salt solution was found only in the NBR phase and not in the SBR phase by EDX microanalysis. Ionic conductivity as a function of NBR content or swelling degree showed clearly that a percolation threshold for ionic conductivity exists. © 1994 John Wiley & Sons, Inc.     

π-Allyl nickel halide–oxygen system as a catalyst for polymerization of butadiene

The π-allyl nickel halide-oxygen system was found to be active as catalyst for stereospecific polymerization of butadiene. The catalyst from π-allyl nickel chloride or π-allyl nickel bromide yields the polymer of 90% cis-1,4 content with high activity, whereas the catalyst from π-allyl nickel iodide affords a polymer of 70% or less cis-1,4 content. The catalyst systems can be fractionated into two parts on the basis of solubility in benzene. It is concluded that the catalyst activity originates essentially from the benzene-insoluble nickel complex which is composed of oxygen, halogen, σ-allyl group, and nickel. The structure of growing polymer terminal is discussed in relation to the mechanism of the stereospecific polymerization.     

Ferromagnetic NiII-GdIII interactions in complexes with NiGd, NiGdNi, and NiGdGdNi cores supported by tripodal ligands

Dinuclear [(NiL)Gd(hfac)(2)(EtOH)](H(3)L = 1,1,1-tris(N-salicylideneaminomethyl)ethane, Hhfac = hexafluoroacetylacetone), trinuclear [(NiL)(2)Gd(NO(3))], and tetranuclear [(NiL)Gd(CH(3)CO(2))(2)(MeOH)](2) complexes, were prepared by treating [Ni(HL)] with [Gd(hfac)(3)(H(2)O)(2)], Gd(NO(3))(3).6H(2)O, and Gd(CH(3)CO(2))(3).4H(2)O, respectively, in the presence of Et(3)N. All the complexes show that ferromagnetic interactions occur between the Ni(II) and Gd(III) ions.