Development and Validation of a Numerical Model of Flow Through Embankment Dams – Comparisons with Experimental Data and Analytical Solutions

The development and validation of a numerical simulation model of the flow through embankment dams is described. The paper focuses on basic verification studies, that is, comparisons with analytical solutions and data from laboratory experiments. Two experimental studies, one dealing with the flow in a Hele–Shaw cell and the other with the flow through a bed of packed glass beads, are also described. Comparisons are carried out with respect to the phreatic surfaces, pressure profiles, seepage levels and discharges. It is concluded that the agreement between experimental, analytical and numerical results is generally satisfactory.     

Ultrafast chemistry: cobalt carbonyl-mediated synthesis of diaryl ketones under microwave irradiation

By combining the advantages of metal activation, in situ carbon monoxide delivery, and microwave heating, benzophenones were efficiently synthesized in 6-10 s. These ultrafast carbonylation reactions occur under air by flash heating of aryl iodides in the presence of dicobalt octacarbonyl. [reaction: see text]     

Separation of conjugated trienoic fatty acid isomers by capillary electrophoresis

A method for direct resolution of conjugated trienoic fatty acid isomers by capillary electrophoresis has been developed. To obtain complete separation a dual cyclodextrin system was used. This contained heptakis-(6-sulfo)-beta-cyclodextrin (charged). Beta-cyclodextrin (uncharged) and sodium dodecylsulfate. Under optimized conditions, all seven isomers were well separated. On average, separation efficiency was 2.9 x 10(5) plates/m.     

A new regioselective Heck vinylation with enamides. Synthesis and investigation of fluorous-tagged bidentate ligands for fast separation

Internal ligand-controlled Heck vinylations of enamides were performed with high regioselectivity and delivered moderate to good yields of dienamides. Controlled heating by microwave irradiation accelerated the palladium-catalyzed reactions, and full conversions were achieved after reaction times of only 15-30 min. New bidentate fluorous-tagged 1,3-bis(diphenylphosphino)propane ligands (F-dppp's) were synthesized and examined. The cationic vinylations of the enamides with F-dppp ligands rendered essentially the same alpha-selectivity and catalytic activity as in those vinylations where nonfluorous ligands were employed. After reaction, the fluorous-tagged ligand material was easily removed by convenient solid fluorous phase separation. The high selectivity, simplicity, and generality of the experimental procedure should make this approach to 2-acylamino-1,3-butadienes attractive.     

Preconcentration and matrix isolation of heavy metals through a two-stage solvent extraction in a flow system

Metal ions (Cd, Cu, Pb, Co and Ni) in trace amounts were isolated from sample matrices and concentrated by extraction in a flow system. The sample flow was first mixed with buffer and reagent (carbamates) and the combined aqueous flow was next segmented with trichlorotrifluoroethane (Freon 113). The metal complexes were extracted into the organic phase in a 2-m long coil which was followed by a separator with a teflon membrane. The organic phase passed on to a second segmentor where an acidic, aqueous mercury(II) solution was added. Back-extraction to the aqueous solution took place in a 1-m long coil. The Freon was removed in a second membrane separator and the aqueous phase was collected and analyzed by graphite-furnace atomic absorption spectrometer. The enrichment factors were of the order of 15–20 and the recoveries were 90–100% from the sub-μg l^?1 level up to 20–50 μg l^?1. The recoveries decrease at concentrations above 50 μg l^?1, presumably because of slow dissolution of precipitated complexes in the sample solutions. The observed recoveries for copper were generally somewhat lower, being in the range 80–90%.     

Recirculation of process streams in fuel ethanol production from softwood based on simultaneous saccharification and fermentation

The effect of process stream recirculation on ethanol production from steam- pretreated softwood based on simultaneous saccharification and fermentation (SSF) was investigated for two process configurations. In the first configuration, a part of the stillage stream after distillation was recycled and, in the second configuration, the liquid after SSF was recycled. The aim was to minimize the energy consumption in the distillation of the fermentation broth and in the evaporation of the stillage, as well as the use of fresh water. However, recirculation leads to an increased concentration of nonvolatiles in the first configuration, and of both volatiles and nonvolatiles in the second configuration. These substances might be inhibitory to the enzymes and the yeast in SSF. When 60% of the fresh water was replaced by stillage, the ethanol yield and the productivity were the same as for the configuration without recirculation. The ethanol production cost was reduced by 17%. In the second configuration, up to 40% of the fresh water could be replaced without affecting the final ethanol yield, although the initial ethanol productivity decreased. The ethanol production cost was reduced by 12%. At higher degrees of recirculation, fermentation was clearly inhibited, resulting in a decrease in ethanol yield while hydrolysis seemed unaffected.     

Influence of allyl ethers on free radical polymerization of styrene

The effect of allyl ethers on the free radical polymerization of styrene has been studied with respect to chain transfer, copolymerization, and conversion. The studies have been performed in an inert atmosphere or in air. Six different allyl ethers have been used as model substances in order to show the effect of structural differences of the ethers on the polymerization. Contrary to what was expected, no chain transfer through hydrogen abstraction was found. Nor did any copolymerization occur. When the polymerization was performed in air, the allyl ethers had a retarding effect on the polymerization rate, due to oxidation of the allyl ethers. The oxidation rate of the allyl ethers was found to be related to their structure, where the functionality and presence of intramolecular hydrogen bonding are the main factors.     

Recycling of process streams in ethanol production from softwoods based on enzymatic hydrolysis

In ethanol production from lignocellulose by enzymatic hydrolysis and fermentation, it is desirable to minimize addition of fresh-water and waste-water streams, which leads to an accumulation of substances in the process. This study shows that the amount of fresh water used and the amount of waste water thereby produced in the production of fuel ethanol from softwood, can be reduced to a large extent by recycling of either the stillage stream or part of the liquid stream from the fermenter. A reduction in fresh-water demand of more than 50%, from 3 kg/kg dry raw material to 1.5 kg/kg dry raw material was obtained without any negative effects on either hydrolysis or fermentation. A further decrease in the amount of fresh water, to one-fourth of what was used without recycling of process streams, resulted in a considerable decrease in the ethanol productivity and a slight decrease in the ethanol yield     

On the semi-quantification of polycyclic aromatic hydrocarbons in contaminated soil by an enzyme-linked immunosorbent assay kit

Polycyclic aromatic hydrocarbons (PAHs) are of environmental concern, for instance when found in contaminated soils at sites where industrial activities have occurred. For efficient screening of such soils, the commercially available enzyme-linked immunosorbent assay (ELISA) kit, the PAH RIS^c® soil test, can be used. However, the site-specific performance may vary due to differences in soil properties and contamination profiles. Hence, in this study we have examined various contributing factors to the total ELISA measurements uncertainties. These factors include contributions from co-extracted (non-target) compounds, the extraction efficiency and differences in cross-reactivity among the target analytes. Reference values were obtained through pressurized liquid extraction (PLE) and gas chromatography coupled to mass spectrometry (GC-MS) analysis. The results showed that the ELISA does not seem to respond to non-target compounds in the soil extracts to any large extent. Furthermore, high molecular weight PAHs were found to be more efficiently extracted with PLE than with methanol agitation, which is used for ELISA. If this, and the cross-reactivity of the individual PAHs, were taken into consideration, the ELISA and GC-MS results were in good agreement.