Vesicle formation in oleyldimethylamine oxide/sodium oleate mixtures

Vesicle formation in a mixture of oleyldimethylamine oxide (OleylDMAO) and sodium oleate (NaOl) was investigated by viscoelastic measurements and cryoscopic transmission electron micrograph (cryo-TEM) observations. The viscoelastic properties changed with increasing mole fraction of NaOl (X _NaOl) from the Maxwell behavior of OleylDMAO solutions (X _NaOl=0) suggesting a transient network of long flexible chains. For X _NaOl=0.2 and 0.4 mixtures, both the shear storage modulus G and the shear loss modulus G showed weak dependences on angular frequency with a relation G>G. From cryo-TEM observations, vesicles coexisted with threadlike micelles in mixtures of X _NaOl=0.2 and 0.3. As X _NaOl increased further (X _NaOl=0.5 and 0.6), threadlike micelles disappeared and the coexistence of vesicles and globular micelles was observed. At X _NaOl=0.5, the viscosity decreased remarkably, which was consistent with the disappearance of threadlike micelles. The results indicated that vesicles were formed by the addition of NaOl to OleylDMAO solutions, contrary to the expectation of a decrease of the packing parameter with the introduction of electric charges.     

Molecular mass distribution analysis of ethyl(hydroxyethyl)cellulose by size-exclusion chromatography with dual light-scattering and refractometric detection

Dual low-angle light scattering and refractometric detection coupled to size-exclusion chromatography provided proof for the presence of a low amount of stable aggregates/particles in ethyl(hydroxyethyl)cellulose. Unlike the correct size-exclusion chromatographic behavior of the parent polysaccharide itself, the aggregates exhibit variable size-dependent weak retention as a function of flow-rate and of ionic strength of the aqueous mobile phase. Therefore, determination of the molecular mass of non-aggregated polymer is possible in aqueous mobile phase containing 0.1 M NaCl under conditions at which aggregates are completely adsorbed on the column packing irrespective of the flow-rate used. Flow-rate and ionic strength-dependent variations of aggregate behavior as well as model size-exclusion experiments with latex particles indicate that they partly carry a minute charge and have a compact structure. Their weak retention under the separation conditions used suggests a difference in their surface chemistry when compared with the dissolved polymer coils which exhibit a correct size-exclusion behavior.     

Determination of zinc,cadmium, lead and copper in sea water by means of computerized potentiometric stripping analysis

Water samples from the Arctic Sea were analyzed by the potentiometric stripping technique. Lead(II) and cadmium(II) were determined after pre-electrolysis for 32 min at—1.1 V vs. Ag/AgCl, the detection limits being 0.06 and 0.04 nM, respectively. Zinc(II) was determined after the addition of gallium(III) by pre-electrolysis for 16 min at —1.4 V vs. Ag/AgCl, the detection limit being 0.25 nM. Problems in the determination of copper(II) at the very low concentrations found in oceanic waters are outlined. The average zinc(II), cadmium(II) and lead(II) concentrations in eight different samples were 2.5, 0.16 and 0.10 nM as determined by potentiometric stripping analysis and 1.9, 0.16 and 0.09 nM as determined by solvent extraction/atomic absorption spectrometry. The advantages of this computerized technique for the analysis of sea water are discussed.     

Polymeric Structure and Solid ~(31)P, ~(113)Cd NMR Spectra of Cadmium(II) Dialkyldithiophosphate (Alkyl = n-butyl and i-butyl)

Owing to the particular affinity toward metal ion and changeable dentation, dialkyldithiophosphates are commonly used ligands in preparation of the transition metal complexes with variable structures1. For instances relevant to this work, the IIB metal complexes defined crystallographically so far have provided the examples as follows2-12 (Scheme 1). Scheme 1 The frameworks of IIB metal complexes of dialkyldithiophosphate MMMMMMMMMM a b c d …     

Redox activity and diffusion of hydrophilic, hydrophobic, and amphiphilic redox active molecules in a bicontinuous cubic phase

The objective was to examine how a bicontinuous cubic phase influences the diffusion and electrochemical activity of dissolved molecules. The cubic phase is a structure with three-dimensional continuous channels of water separated by an apolar membrane. A redox active molecule can dissolve in three different environments. A hydrophobic molecule will prefer the interior of the membrane, a hydrophilic molecule will prefer the water channels, and an amphiphilic molecule will be situated with its headgroup at the surface of the membrane and its tail in the interior. The electrochemical activity was measured with cyclic voltammetry and the transport behavior with chronocoulometry. All the molecules were redox active in the cubic phase; that is, all the molecules could reach the surface of the electrode and react. The cubic phase made the kinetics of the charge transfer slower, showing a quasi-reversible behavior. The reason may be that a layer of the membrane adheres to the hydrophobic electrode surface. The diffusion experiment showed that the diffusion was slower than in solution. The molecules that were restricted to diffuse within the membrane gave particularly low mass transport rates.     

Synthesis,characterization, and curing of hyperbranched allyl ether–maleate functional ester resins

A model two-step synthesis of a saturated hyperbranched hydroxyl-terminated ester has been developed to show a synthesis route. Three different series of hyperbranched esters with different terminations have been synthesized to relate some of their properties to their structures. This route has then been used to synthesize three different allyl ethermaleate functional hyperbranched ester resins in a two-step procedure. The resins have been characterized with respect to rheology, structure, and properties, and the differences are discussed. The allyl ether-maleate functional resins have also been studied with respect to curing performance and final film properties. © 1993 John Wiley & Sons, Inc.     

Homogeneous and supported catalysts based on bis(imino)pyridyl Iron(II) complexes for ethylene polymerization

Data on ethylene polymerization on homogeneous and supported catalysts based on 2,6-bis(imino)pyridyl Fe(II) complexes activated by trialkylaluminums are considered (activity, the molecular-weight characteristics of polymers, the number of active sites, and the propagation rate constants). Unlike homogeneous systems, the supported catalysts prepared with the use of various carriers (SiO₂, Al₂O₃, and MgCl₂) exhibited high stability and activity at 70–80°C and produced high-molecular-weight polyethylene with a broad molecular-weight distribution (MWD). The molecular weights and MWDs of polymers and the propagation rate constant depended on the nature of the carrier only slightly. The reasons for an unusual effect of an increase in the activity of the supported catalysts in ethylene polymerization in the presence of hydrogen are discussed.     

Vibrationally resolved rate coefficients and branching fractions in the dissociative recombination of O2+

We have studied the dissociative recombination of the first three vibrational levels of O(2) (+) in its electronic ground X (2)Pi(g) state. Absolute rate coefficients, cross sections, quantum yields and branching fractions have been determined in a merged-beam experiment in the heavy-ion storage ring, CRYRING, employing fragment imaging for the reaction dynamics. We present the absolute total rate coefficients as function of collision energies up to 0.4 eV for five different vibrational populations of the ion beam, as well as the partial (vibrationally resolved) rate coefficients and the branching fractions near 0 eV collision energy for the vibrational levels v=0, 1, and 2. The vibrational populations used were produced in a modified electron impact ion source, which has been calibrated using Cs-O(2)(+) dissociative charge transfer reactions. The measurements indicate that at low collision energies, the total rate coefficient is weakly dependent on the vibrational excitation. The calculated thermal rate coefficient at 300 K decreases upon vibrational excitation. The partial rate coefficients as well as the partial branching fractions are found to be strongly dependent on the vibrational level. The partial rate coefficient is the fastest for v=0 and goes down by a factor of two or more for v=1 and 2. The O((1)S) quantum yield, linked to the green airglow, increases strongly upon increasing vibrational level. The effects of the dissociative recombination reactions and super elastic collisions on the vibrational populations are discussed.     

On-column polymer-imbedded graphite inlet electrode for capillary electrophoresis coupled on-line with flow injection analysis in a poly(dimethylsiloxane) interface

A method for coupling an electrophoretic driven separation to a liquid flow, using conventional fused-silica capillaries and a soft polymeric interface is presented. A novel design of the electrode providing high voltage to the electrophoretic separation was also developed. The electrode consisted of a conductive polyimide/graphite imbedded coating immobilized onto the capillary electrophoresis (CE) column inlet. This integrated electrode gave the same separation performance as a commonly used platinum electrode. The on-column electrode also showed good electrochemical stability in chronoamperometric experiments. In addition, with this electrode design, the electrode position relative to the inlet end of the CE column will always be constant and well defined. The on-line flow injection analysis (FIA)-CE system was used with electrospray ionization (ESI)-time of flight (TOF)-mass spectrometry detection. The preparation of the PDMS (poly(dimethylsiloxane)) interface for FIA-CE is described in detail and used for initial tests of the on-column polymer-imbedded graphite inlet electrode. In this interface, a pressure-driven liquid flow, a make up CE electrolyte and a CE column inlet meet in a two-level cross (95 microm ID) in the PDMS structure, enabling independent flow characterization.