An isoindigo-based low band gap polymer for efficient polymer solar cells with high photo-voltage

A new low band gap polymer (E(g) = 1.6 eV) with alternating thiophene and isoindigo units was synthesized and characterized. A PCE of 3.0% and high open-circuit voltage of 0.89 V were realized in polymer solar cells, which demonstrated the promise of isoindigo as an electron deficient unit in the design of donor-acceptor conjugated polymers for polymer solar cells.     

State estimation for partially observed Markov chains

Recursive equations are derived for the conditional distribution of the state of a Markov chain, given observations of a function of the state. Mainly continuous time chains are considered. The equations for the conditional distribution are given in matrix form and in differential equation form. The conditional distribution itself forms a Markov process. Special cases considered are doubly stochastic Poisson processes with a Markovian intensity, Markov chains with a random time, and Markovian approximations of semi-Markov processes. Further the results are used to compute the Radon-Nikodym derivative for two probability measures for a Markov chain, when a function of the state is observed.     

Dynamic load and inflation pressure effects on contact pressures of a forestry forwarder tire

A Trelleborg Twin 421 Mark II 600/55-26.5 steel-reinforced bias-ply forwarder drive tire at inflation pressures of 100 and 240 kPa and dynamic loads of 23.9 and 40 kN was used at 5% travel reduction on a firm clay soil. Effects of dynamic load and inflation pressure on soil–tire contact pressures were determined using six pressure transducers mounted on the tire tread. Three were mounted on the face of a lug and three at corresponding locations on the undertread. Contact angles increased with decreases in inflation pressure and increases in dynamic load. Contact pressures on a lug at the edge of the tire increased as dynamic load increased. Mean and peak pressures on the undertread generally were less than those on a lug. The peak pressures on a lug occurred forward of the axle in nearly all combinations of dynamic load, inflation pressure, and pressure sensor location, and peak pressures on the undertread occurred to the rear of the axle in most of the combinations. Ratios of the peak contact pressure to the inflation pressure ranged from 0 at the edge of the undertread for three combinations of dynamic load and inflation pressure to 8.39 for the pressure sensor on a lug, near the tire centerline, when the tire was underinflated. At constant dynamic load, net traction and tractive efficiency decreased as inflation pressure increased.     

Micromechanics, macromechanics and constitutive modeling of the elasto-viscoplastic deformation of rubber-toughened glassy polymers

Under certain conditions, such as sufficiently low temperatures, high loading rates and/or highly triaxial stress states, glassy polymers display an unfavorable characteristic—brittleness. A technique used for reducing the brittleness (increasing the fracture toughness) of these materials is rubber toughening. While there is significant qualitative understanding of the mechanical behavior of rubber-toughened polymers, quantitative modeling tools for the large-strain deformation of rubber-toughened glassy polymers are largely lacking.In this paper, we develop a suite of numerical tools to investigate the mechanical behavior of rubber-toughened glassy polymers, with emphasis on rubber-toughened polycarbonate. The rubber particles are modeled as voids in view of their deformation-induced cavitation early during deformation. A three-dimensional micromechanical model of the heterogeneous microstructure is developed to study the effects of initial rubber particle (void) volume fraction on the underlying elasto-viscoplastic deformation mechanisms in the material, and how these mechanisms influence the macroscopic response of the material. A continuum-level constitutive model is developed for the large-strain elasto-viscoplastic deformation of porous glassy polymers, and it is calibrated against micromechanical modeling results for porous polycarbonate. The constitutive model can be used to study various boundary value problems involving rubber-toughened (porous) glassy polymers. As an example, the case of an axisymmetric notched bar is simulated for the case of polycarbonate with varying levels of initial porosity. The quality of the constitutive model calibration is assessed using a multi-scale modeling approach.     

Dynamics of the periodic type-K competitive Kolmogorov systems

For time-periodic dissipative and irreducible type-K competitive Kolmogorov systems, it is proved that there is a canonically defined countable family F of unordered, disjoint invariant sets with the property that, for every persistent trajectory whose ω-limit set is not a cycle, there exists a unique trajectory in some element of F such that these two trajectories are asymptotic and the corresponding points in these two trajectories are K-related.     

Valuing Asian options using the finite element method and duality techniques

The main objective of this paper is to develop an adaptive finite element method for computation of the values, and different sensitivity measures, of the Asian option with both fixed and floating strike. The pricing is based on Black–Scholes PDE-model and a method developed by Ve?e? where the resulting PDEs are of parabolic type in one spatial dimension and can be applied to both continuous and discrete Asian options. We propose using an adaptive finite element method which is based on a posteriori estimates of the error in desired quantities, which we derive using duality techniques. The a posteriori error estimates are tested and verified, and are used to calculate optimal meshes for each type of option. The use of adapted meshes gives superior accuracy and performance with less degrees of freedom than using uniform meshes. The suggested adaptive finite element method is stable, gives fast and accurate results, and can be applied to other types of options as well.     

A posteriori error estimates for mixed finite element approximations of parabolic problems

We derive residual based a posteriori error estimates for parabolic problems on mixed form solved using Raviart–Thomas–Nedelec finite elements in space and backward Euler in time. The error norm considered is the flux part of the energy, i.e. weighted L ²(Ω) norm integrated over time. In order to get an optimal order bound, an elementwise computable post-processed approximation of the scalar variable needs to be used. This is a common technique used for elliptic problems. The final bound consists of terms, capturing the spatial discretization error and the time discretization error and can be used to drive an adaptive algorithm.     

Synthesis and thiol–ene photopolymerization of allyl‐ether functionalized dendrimers

Well‐defined, allyl‐ether functional, first‐generation dendrimers have been synthesized. The convergent growth approach was utilized, using the anhydride of the allyl‐ether terminated building block. Three different core moieties were used: trimethylolpropane, trisphenol, and ditrimethylolpropane. The coupling reactions proceeded in good yields and all compounds were characterized by NMR, MALDI‐TOF, and SEC. The allyl‐terminated dendrimers were crosslinked by thiol–ene chemistry, using a multifunctional thiol, TriThiol, to give clear and smooth films. The photopolymerization was conducted in the presence of a photoinitiator, Irgacure 651, and no traces of either allyl‐ether groups or thiols were observed by FT‐Raman after cure. All crosslinked films were characterized with respect to mechanical (DMA) and thermal (DSC) properties. It was found that homogeneous networks were formed and that the core functionality and structure had little effect on the network properties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1339–1348, 2008     

Microchip electrophoresis for specific gene detection of the pathogenic bacteria V. cholerae by circle-to-circle amplification.

We have developed a new method for a fast and precise analysis of circle-to-circle amplification (C2CA) product for specific gene detection by microchip electrophoresis. In this method, we have added a new enzymatic step to the C2CA reaction, which could be carried out isothermally at 37 degrees C. Compared to the original single-stranded DNA, the double-stranded DNA that is produced by this enzymatic reaction is more reliable for analysis by microchip electrophoresis. C2CA product was detected within 55 s with high reproducibility by this method which was successfully applied to the detection of 10-ng genomic DNA of the pathogenic bacteria Vibrio. cholerae within 110 s. Purification was found to be an indispensable step for the analysis of the C2CA product of genomic DNA samples.