MoCu3TeO7Cl2·0.5H2O

Single crystals of molybdenum(VI) tricopper(II) tellurium(IV) hepta­oxide dichloride hemihydrate, MoCu₃TeO₇Cl₂·0.5H₂O, were synthesized via a transport reaction in sealed evacuated silica tubes. All atoms occupy general positions within the triclinic () unit cell. The building units are irregular CuO₄Cl and CuO₃Cl₂ square pyramids, distorted TeO₃₊₁E trigonal bipyramids (E is the lone pair of Te^IV) and irregular MoO₅ pyramids. The TeO₃₊₁E, CuO₄Cl and CuO₃Cl₂ polyhedra form (110) layers bridged by Mo atoms. The water mol­ecules are located in [100] channels.     

On-column polymer-imbedded graphite inlet electrode for capillary electrophoresis coupled on-line with flow injection analysis in a poly(dimethylsiloxane) interface

A method for coupling an electrophoretic driven separation to a liquid flow, using conventional fused-silica capillaries and a soft polymeric interface is presented. A novel design of the electrode providing high voltage to the electrophoretic separation was also developed. The electrode consisted of a conductive polyimide/graphite imbedded coating immobilized onto the capillary electrophoresis (CE) column inlet. This integrated electrode gave the same separation performance as a commonly used platinum electrode. The on-column electrode also showed good electrochemical stability in chronoamperometric experiments. In addition, with this electrode design, the electrode position relative to the inlet end of the CE column will always be constant and well defined. The on-line flow injection analysis (FIA)-CE system was used with electrospray ionization (ESI)-time of flight (TOF)-mass spectrometry detection. The preparation of the PDMS (poly(dimethylsiloxane)) interface for FIA-CE is described in detail and used for initial tests of the on-column polymer-imbedded graphite inlet electrode. In this interface, a pressure-driven liquid flow, a make up CE electrolyte and a CE column inlet meet in a two-level cross (95 microm ID) in the PDMS structure, enabling independent flow characterization.     

Polymeric Structure and Solid ~(31)P, ~(113)Cd NMR Spectra of Cadmium(II) Dialkyldithiophosphate (Alkyl = n-butyl and i-butyl)

Owing to the particular affinity toward metal ion and changeable dentation, dialkyldithiophosphates are commonly used ligands in preparation of the transition metal complexes with variable structures1. For instances relevant to this work, the IIB metal complexes defined crystallographically so far have provided the examples as follows2-12 (Scheme 1). Scheme 1 The frameworks of IIB metal complexes of dialkyldithiophosphate MMMMMMMMMM a b c d …     

Perthio- and perseleno-1,3-butadienes, -but-1-ene-3-ynes,and -[3]-cumulenes: one-step syntheses from 1,4-dilithio-1,3-butadiyne

[reaction: see text] Treatment of 1,4-dilithio-1,3-butadiyne (1) with dichalcogenides RSSR or RSeSeR affords dithio- and diseleno-1,3-butadiynes (2, 3), perthio- and perseleno-[3]-cumulenes (4, 5), perthio- and perseleno-1,3-butadienes (6, 7), and/or perthio- and perseleno-but-1-ene-3-ynes (8, 9). The products can be controlled by stoichiometry and temperature, by the presence or absence of oxygen, and by choice of the "R" group. By X-ray crystallography, hexa(methylthio)-1,3-butadiene is highly twisted, with a torsion angle [Phi(CCCC)] of 84.7 degrees and an elongated C(2)-C(3) distance of 1.484(3) A.     

High-throughput screening of pKa values of pharmaceuticals by pressure-assisted capillary electrophoresis and mass spectrometry

A high-throughput pKa screening method based on pressure-assisted capillary electrophoresis (CE) and mass spectrometry (MS) is presented. Effects of buffer type and ionic strength on sensitivity and pKa values were investigated. Influence of dimethyl sulfoxide (DMSO) concentration present in the sample on effective mobility measurement was examined. A series of ten volatile buffers, covering a pH range from 2.5 to 10.5 with the same ionic strength, was employed. The application of volatile background electrolytes resulted in significant signal increase as compared with commonly used non-volatile phosphate buffers. In general, the CE/MS system provided a ten-fold higher sensitivity than conventional UV detection. The newly developed CE/MS method offers high-throughput capacity by pooling a number of compounds into a single sample. Simultaneous measurement of more than 50 compounds was readily achieved in less than 150 min. The measured pKa values are consistent with the published data obtained from the CE/UV method and are also in good agreement with data generated by other methods. Other advantages of using CE/MS for pKa screening are illustrated with typical examples, including poorly soluble compounds and non-UV-absorbing compounds.     

Redox activity and diffusion of hydrophilic, hydrophobic, and amphiphilic redox active molecules in a bicontinuous cubic phase

The objective was to examine how a bicontinuous cubic phase influences the diffusion and electrochemical activity of dissolved molecules. The cubic phase is a structure with three-dimensional continuous channels of water separated by an apolar membrane. A redox active molecule can dissolve in three different environments. A hydrophobic molecule will prefer the interior of the membrane, a hydrophilic molecule will prefer the water channels, and an amphiphilic molecule will be situated with its headgroup at the surface of the membrane and its tail in the interior. The electrochemical activity was measured with cyclic voltammetry and the transport behavior with chronocoulometry. All the molecules were redox active in the cubic phase; that is, all the molecules could reach the surface of the electrode and react. The cubic phase made the kinetics of the charge transfer slower, showing a quasi-reversible behavior. The reason may be that a layer of the membrane adheres to the hydrophobic electrode surface. The diffusion experiment showed that the diffusion was slower than in solution. The molecules that were restricted to diffuse within the membrane gave particularly low mass transport rates.     

Precision Penning trap mass measurements of rare isotopes produced by projectile fragmentation

The low-energy beam and ion trap facility LEBIT at NSCL/MSU is at present the only facility where precision experiments are performed with stopped rare isotope beams produced by fast-beam fragmentation. LEBIT combines high-pressure-gas stopping with advanced ion manipulation techniques to provide brilliant low-energy beams. So far these beams have mainly been used for mass measurements on short-lived rare isotopes with a 9.4T Penning trap mass spectrometer. Recent examples include ^70m Br , located at the proton dripline, ³²Si and the iron isotopes ^63-65Fe . While the measurement of ³²Si helps to solve a long-standing dispute over the validity of the isobaric multiplet mass equation (IMME) for the A = 32 , T = 2 multiplet, the mass measurements of ^65m,g Fe marked the first time a nuclear isomeric state has been discovered by Penning trap mass spectrometry.