On-column polymer-imbedded graphite inlet electrode for capillary electrophoresis coupled on-line with flow injection analysis in a poly(dimethylsiloxane) interface

A method for coupling an electrophoretic driven separation to a liquid flow, using conventional fused-silica capillaries and a soft polymeric interface is presented. A novel design of the electrode providing high voltage to the electrophoretic separation was also developed. The electrode consisted of a conductive polyimide/graphite imbedded coating immobilized onto the capillary electrophoresis (CE) column inlet. This integrated electrode gave the same separation performance as a commonly used platinum electrode. The on-column electrode also showed good electrochemical stability in chronoamperometric experiments. In addition, with this electrode design, the electrode position relative to the inlet end of the CE column will always be constant and well defined. The on-line flow injection analysis (FIA)-CE system was used with electrospray ionization (ESI)-time of flight (TOF)-mass spectrometry detection. The preparation of the PDMS (poly(dimethylsiloxane)) interface for FIA-CE is described in detail and used for initial tests of the on-column polymer-imbedded graphite inlet electrode. In this interface, a pressure-driven liquid flow, a make up CE electrolyte and a CE column inlet meet in a two-level cross (95 microm ID) in the PDMS structure, enabling independent flow characterization.     

On the internally contracted multireference CI method with full contraction

The configuration interaction (CI ) method where the efficiency of the generators of the unitary group is most fully exploited is the internally contracted multireference CI method. In the most recent version of this method the semi-internal configurations were kept uncontracted, which means that the number of configurations can still be quite large. In the present study the necessary formulas are derived for the case where the semi-internal states are also contracted. The highest density matrix that appears in these formulas is of order 5, and the computational treatment of this large matrix is discussed in detail.     

Determination of radiative lifetimes in neutral nitrogen using short laser pulses from a distributed feedback dye laser

Radiative lifetimes were determined for two short-lived states in neutral nitrogen. Following photo-dissociation and two-photon excitation employing the same UV source, excitation to higher states was performed with a distributed feedback dye laser (DFDL). The lifetimes were found to be τ(2p ²4d ⁴ D _7/2)=17(3) ns and τ(2p ²5s ⁴ P _5/2)=22(3) ns.     

Regiochemical Control and Suppression of Double Bond Isomerization in the Heck Arylation of 1-(Methoxycarbonyl)-2,5-dihydropyrrole

Arylation of 1-(methoxycarbonyl)-2,5-dihydropyrrole under standard Heck reaction conditions produces a mixture of compounds. The olefin undergoes two types of palladium-catalyzed reactions: (a) arylation to provide C-3 arylated derivatives and (b) competing double bond isomerization. Addition of silver carbonate and thallium acetate fully suppressed the isomerization, and good yields of C-3 substituted compounds were achieved after arylation with aryl halides. With regard to aryl triflates as arylating agents, addition of lithium chloride was necessary to promote the Heck reaction. This additive excluded the use of silver and thallium salts, but high regioselectivity and good yields could be obtained by employing tri-2-furylphosphine as ligand. Arylation was rendered both regioselective and enantioselective (58% ee) with 1-naphthyl triflate as substrate utilizing a (R)-BINAP/thallium acetate combination. The C-3 arylated enamides were converted further into the corresponding 3-arylpyrrolidines.     

Appearance of pure fluorocarbon micelles surveyed by fluorescence quenching of amphiphilic quinoline derivatives in fluorocarbon and hydrocarbon surfactant mixtures

A halide-sensitive fluorescence probe was utilized to evaluate the miscibility of fluorocarbon and hydrocarbon surfactants in aqueous micellar systems. The fluorescence of 6-methoxy-N-1,1,2,2-tetrahydroheptadecafluorodecylquinolinium chloride, FC10MQ, was quenched by halide ions dissociated from the surfactant. The fluorescence in micellar solutions showed an initially rapid decay. This suggests that halide ions effectively quench FC10MQ fluorescence at the micellar surface. The subsequent slow decay corresponds to the quenching of FC10MQ fluorescence in the aqueous bulk phase by the free counterions. The Stern-Volmer plots for fluorescence quenching gave a distinct break at the critical micelle concentration of the cationic surfactants. The abrupt increase in fluorescence quenching is attributed to the solubilization of the probe in the micelles. The fluorescence quenching behavior provides direct information about the immiscibility of fluorocarbon and hydrocarbon species in micelles, and the results indicate that almost pure fluorocarbon micelles appear in surfactants mixtures.     

Der erste Polyiodokomplex – Triethylsulfoniumtriiodomercurat(II)-tris(diiod), (Et3S)[Hg2I6]1/2 · 3 I2

The First Polyiodo Complex – Triethylsulfoniumtriiodomercurate(II)-tris(diiodine), (Et₃S)[Hg₂I₆]_1/2 · 3 I₂ After Raman spectroscopic investigation of the system HgI₂/Et₃SI_x, x = 3, 5, 7, triethylsulfoniumtriiodomercuratetris(diiodine), (Et₃S)[Hg₂I₆]_1/2 · 3 I₂ was synthesized by reacting of HgI₂ and liquid Et₃SI₇. The compound crystallizes at room temperature triclinically in the space group P1 with a = 879.4(7), b = 1 209.1(5), c = 1 291.5(5) pm, α = 96.16(3)°, β = 103.82(6)°, γ = 99.05(5)° and Z = 2. The crystal structure is composed of disordered Et₃S⁺ cations, the centrosymmetric complex anion [HgI_2/2I₂]₂^2? and three connecting iodine molecules I₂.     

Flexible active matrix addressed displays manufactured by printing and coating techniques

A flexible electrochromic active matrix addressed display, including 8 × 8 pixels, is demonstrated by using solution processing based on standard printing and coating manufacturing techniques. Each organic electrochromic display (OECD) pixel and its corresponding organic electrochemical transistor (OECT) are located on different sides of the flexible PET substrate. Electronic vias generated through the plastic substrate connects each OECD pixel with one addressing OECT. When comparing this display with actively addressed OECDs with all its components located on the same side, the present approach based on this electronic via substrate provides an enhanced pixel resolution and a relatively more simplified manufacturing process. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Rapid Method to Screen Unopened Bottles to Detect Concealed Drugs

A bottle screening method to detect smuggling drugs was developed based on a series of rapid and automated magnetic resonance measurements. Liquid alteration is detected by evaluating chemical and physical properties of the liquid, scanning the bottle with a compact, non-contact magnetic resonance probe. Chemical and molecular diffusion changes are detected by means of the magnetic resonance relaxation time. The inspection device automatically detects the presence of concealed powders dissolved in liquids in a second timescale. The non-ionizing, non-contact method effectively screens bottles, regardless of their shape, size, and color. The proposed system configuration does not require a large magnet generating uniform magnetic fields; rather it inspects the liquid using a compact probe positioned on the wall of the bottle. For a variety of samples tested, the screening does not require detailed information on the expected content of the bottle.