Targeting EGFR-overexpressed A431 cells with EGF-labeled silica-coated magnetic nanoparticles

Electrode catalysts composed of carbon-supported PtRu nanoparticles (PtRu/C) for use as a direct methanol fuel cell anode were synthesized by the reduction of precursor ions in an aqueous solution via irradiation with a high-energy electron beam. The effect of pH control in the precursor solution on the PtRu mixing state and the methanol oxidation activity was studied in order to enhance the catalytic activity for methanol oxidation. The PtRu/C structures were characterized by transmission electron microscopy, inductively coupled plasma atomic emission spectrometry, X-ray fluorescence spectrometry, and X-ray diffraction and X-ray absorption fine structure techniques. The methanol oxidation activity was evaluated by linear sweep voltammetry. The initial pH of the precursor solution has little influence on the average grain size for the metal particles (approximately 3.5 nm) on the carbon particle supports, but the dispersibility of the metal particles, PtRu mixing state, and methanol oxidation activity differed. The maintenance of a low pH in the precursor solution gave the best dispersibility of the PtRu nanoparticles supported on the surface of the carbon particles, whereas, a high pH gave the best PtRu mixing state and the highest oxidation current although a low dispersibility of the PtRu nanoparticles supported on the surface of the carbon particles was obtained. The PtRu mixing state strongly correlated with the methanol oxidation current. In addition, a high pH was more effective for PtRu mixing when using an electron beam irradiation reduction method, because the complexation reaction of the chelating agents was improved, which resulted in an enhancement of the catalytic activity for methanol oxidation.     

The effect of volatile organic compounds and hypoxia on paper degradation

The possible effects of volatile organic compounds (VOCs) and of hypoxic conditions on the durability of library and archival collections have been investigated. There is growing evidence that particularly in micro-environments, there may be an important contribution of these indoor-generated pollutants to the degradation of paper. However, since the principal source of VOCs in repositories is the collections themselves, there are also significant possibilities for less stable papers, which are net VOC emitters, to promote the degradation of more stable papers, which may be net VOC absorbers.Using a range of model and real historic papers, the influence of acetic acid, formic acid, furfural, toluene, 1,4-diethylbenzene, iso-butylbenzol, 2-pentylfuran, paraformaldehyde, hexanal and vanillin was evaluated by adding them to samples degraded in closed vessels at elevated temperature. Possible protective effects of the use of activated charcoal cloth, oxygen removal, and of various chemisorbents were also investigated.The results strongly suggest that particularly VOCs with acidic or oxidisable functions can have a strong effect on degradation of cellulose. This is less pronounced in lignin-containing and acidic papers and more pronounced in papers with a small alkaline reserve. The removal of VOCs from the immediate environment can have a pronounced beneficial effect on papers emitting VOCs more intensively, in fact, the lifetime expectancy can be doubled.The results have immediate implications for storage of paper-based heritage in enclosures, but also for initiation of long-term VOC monitoring programmes in libraries and archives, where significant development is still needed.     

Treatment of the multimode Jahn-Teller problem in small aromatic radicals

The family of the Jahn-Teller (JT) active hydrocarbon rings, C(n)H(n) (n = 5-7), was analyzed by the means of multideterminantal density functional theory (DFT) approach. The multimode problem was addressed using the intrinsic distortion path (IDP) method, in which the JT distortion is expressed as a linear combination of all totally symmetric normal modes in the low symmetry minimum energy conformation. Partitioning of the stabilization energy into the various physically meaningful terms arising from Kohn-Sham DFT has been performed to get further chemical insight into the coupling of the nuclear movements and the electron distribution.     

Focal point analysis of the singlet-triplet energy gap of octacene and larger acenes

A benchmark theoretical study of the electronic ground state and of the vertical and adiabatic singlet-triplet (ST) excitation energies of n-acenes (C(4n+2)H(2n+4)) ranging from octacene (n = 8) to undecacene (n = 11) is presented. The T1 diagnostics of coupled cluster theory and further energy-based criteria demonstrate that all investigated systems exhibit predominantly a (1)A(g) singlet closed-shell electronic ground state. Singlet-triplet (S(0)-T(1)) energy gaps can therefore be very accurately determined by applying the principle of a focal point analysis (FPA) onto the results of a series of single-point and symmetry-restricted calculations employing correlation consistent cc-pVXZ basis sets (X = D, T, Q, 5) and single-reference methods [HF, MP2, MP3, MP4SDQ, CCSD, and CCSD(T)] of improving quality. According to our best estimates, which amount to a dual extrapolation of energy differences to the level of coupled cluster theory including single, double, and perturbative estimates of connected triple excitations [CCSD(T)] in the limit of an asymptotically complete basis set (cc-pV∞Z), the S(0)-T(1) vertical (adiabatic) excitation energies of these compounds amount to 13.40 (8.21), 10.72 (6.05), 8.05 (3.67), and 7.10 (2.58) kcal/mol, respectively. In line with the absence of Peierls distortions (bond length alternations), extrapolations of results obtained at this level for benzene (n = 1) and all studied n-acenes so far (n = 2-11) indicate a vanishing S(0)-T(1) energy gap, in the limit of an infinitely large polyacene, within an uncertainty of 1.5 kcal/mol (0.06 eV). Lacking experimental values for the S(0)-T(1) energy gaps of n-acenes larger than hexacene, comparison is made with recent optical and electrochemical determinations of the HOMO-LUMO band gap. Further issues such as scalar relativistic, core correlation, and diagonal Born-Oppenheimer corrections (DBOCs) are tentatively examined.     

Kinetics, mechanism, and DFT calculations of thermal degradation of a Zn(II) complex with N-benzyloxycarbonylglycinato ligands

Abstract  

A Zn(II) complex with N-benzyloxycarbonylglycinato ligands was studied by non-isothermal methods, in particular Kissinger–Akahira–Sunose’s method, and further analysis of these results was performed by Vyazovkin’s algorithm and an artificial compensation effect. Density functional theory calculations of thermodynamic quantities were performed, and results obtained by both methods are consistent, thus clarifying the mechanism of this very interesting multi-step degradation.     

Classification of iron‐based inks by means of micro‐Raman spectroscopy and multivariate data analysis

In this work, multivariate data analysis methods were applied to the analysis and interpretation of micro‐Raman spectra, collected from a broad set of historical iron‐based ink samples, previously characterised for the content of organic acids (gallic acid, ellagic acid and protocatechuic acid). The proposed method relies on principal component analysis of the noisy spectra typically obtained on original, degraded, organic samples, where fluorescence could affect the Raman signal. The signal components could be distinguished from the noise components and then used to build a linear discriminant analysis (LDA) model, achieving separation of the spectra into three classes. Selection of pure signal factors also improved effectiveness and performances of partial least square regression (PLS) algorithms, allowing quantification of condensed tannic acid residuals. Application of multivariate methods to discriminate signal from noise removes the need for spectral data manipulation (filtering, smoothing and differentiating). The obtained classification method for discrimination of historic inks and the regression method for determination of condensed tannic acid residuals supports the use of Raman analysis of fluorescing organic materials, and may provide information to scholars on ink composition and potentially on its provenance. Copyright © 2013 John Wiley & Sons, Ltd.     

Characterisation of historic plastics using terahertz time-domain spectroscopy and pulsed imaging

Terahertz (THz) time-domain spectroscopy and 3D THz pulsed imaging have been explored with regard to polymer materials, both commodity and historic polymers. A systematic spectroscopic study of a wide range of different polymer materials showed significant differences in their spectra. Polyolefins and polystyrenes generally exhibit lower absorption than other examined polymers, various cellulose derivates, poly(vinyl chloride), poly(methyl methacrylate), polyamide, hard rubber and phenol formaldehyde resin, the last of these exhibiting the most intense absorption over the entire range, 0.15–4.2 THz. It was also examined how the presence of plasticisers in poly(vinyl chloride), the presence of fillers in polypropylene, and the degree of branching in polyethylene and polystyrene affect the spectra; inorganic fillers in polypropylene affected the absorption most. With 3D THz pulsed imaging, features in polymer objects were explored, appearing either as integral parts of the material (coatings and pores in foams) or as a consequence of physical deterioration (cracks, delamination). All of these features of various complexities can be successfully imaged in 3D. Terahertz technology is thus shown to have significant potential for both chemical and structural characterisation of polymers, which will be of interest to heritage science, but also to the polymer industry and development of analytical technologies in general.     

The past and the future of chromogenic colour photographs: lifetime modelling using near-infrared spectroscopy &; enhancement using hypoxia

Chromogenic colour prints are amongst the most unstable materials found in heritage collections as the information-carrying dyes fade appreciably even in the dark. However, image stability is just one of the numerous properties that photographic companies aspire for in their products, along with constant improvements in colour balance and image development.     

Anion-Sensing Properties of Cyclopentaphenylalanine

Cyclic pentaphenylalanine was studied as an efficient anion sensor for halides, thiocyanate and oxoanions in acetonitrile and methanol. Stability constants of the corresponding complexes were determined by means of fluorimetric, spectrophotometric, ¹H NMR, and microcalorimetric titrations. A detailed structural overview of receptor–anion complexes was obtained by classical molecular dynamics (MD) simulations. The results of ¹H NMR and MD studies indicated that the bound anions were coordinated by the amide groups of cyclopeptide, as expected. Circular dichroism (CD) titrations were also carried out in acetonitrile. To the best of our knowledge, this is the first example of the detection of anion binding by cyclopeptide using CD spectroscopy. The CD spectra were calculated from the structures obtained by MD simulations and were qualitatively in agreement with the experimental data. The stoichiometry of almost all complexes was 1:1 (receptor:anion), except for dihydrogen phosphate where the binding of dihydrogen phosphate dimer was observed in acetonitrile. The affinity of the cyclopeptide receptor was correlated with the structure of anion coordination sphere, as well as with the solvation properties of the examined solvents.     

Photochemical Reactivity of Naphthol-Naphthalimide Conjugates and Their Biological Activity

Quinone methide precursors 1a–e, with different alkyl linkers between the naphthol and the naphthalimide chromophore, were synthesized. Their photophysical properties and photochemical reactivity were investigated and connected with biological activity. Upon excitation of the naphthol, Förster resonance energy transfer (FRET) to the naphthalimide takes place and the quantum yields of fluorescence are low (Φ_F ≈ 10⁻²). Due to FRET, photodehydration of naphthols to QMs takes place inefficiently (Φ_R ≈ 10⁻⁵). However, the formation of QMs can also be initiated upon excitation of naphthalimide, the lower energy chromophore, in a process that involves photoinduced electron transfer (PET) from the naphthol to the naphthalimide. Fluorescence titrations revealed that 1a and 1e form complexes with ct-DNA with moderate association constants K_a ≈ 10⁵–10⁶ M⁻¹, as well as with bovine serum albumin (BSA) K_a ≈ 10⁵ M⁻¹ (1:1 complex). The irradiation of the complex 1e@BSA resulted in the alkylation of the protein, probably via QM. The antiproliferative activity of 1a–e against two human cancer cell lines (H460 and MCF 7) was investigated with the cells kept in the dark or irradiated at 350 nm, whereupon cytotoxicity increased, particularly for 1e (>100 times). Although the enhancement of this activity upon UV irradiation has no imminent therapeutic application, the results presented have importance in the rational design of new generations of anticancer phototherapeutics that absorb visible light.