Synthesis of Molecular Wires of Linear and Branched Bis(terpyridine)‐Complex Oligomers and Electrochemical Observation of Through‐Bond Redox Conduction

Films of linear and branched oligomer wires of Fe(tpy)₂ (tpy=2,2′:6′,2′′‐terpyridine) were constructed on a gold‐electrode surface by the interfacial stepwise coordination method, in which a surface‐anchoring ligand, (tpy? C₆H₄N?NC₆H₄? S)₂ ( 1 ), two bridging ligands, 1,4‐(tpy)₂C₆H₄ ( 3 ) and 1,3,5‐(C?C? tpy)₃C₆H₃ ( 4 ), and metal ions were used. The quantitative complexation of the ligands and Fe^II ions was monitored by electrochemical measurements in up to eight complexation cycles for linear oligomers of 3 and in up to four cycles for branched oligomers of 4 . STM observation of branched oligomers at low surface coverage showed an even distribution of nanodots of uniform size and shape, which suggests the quantitative formation of dendritic structures. The electron‐transport mechanism and kinetics for the redox reaction of the films of linear and branched oligomer wires were analyzed by potential‐step chronoamperometry (PSCA). The unique current‐versus‐time behavior observed under all conditions indicates that electron conduction occurs not by diffusional motion but by successive electron hopping between neighboring redox sites within a molecular wire. Redox conduction in a single molecular wire in a redox‐polymer film has not been reported previously. The analysis provided the rate constant for electron transfer between the electrode and the nearest redox‐complex moiety, k₁ (s^?1), as well as that for intrawire electron transfer between neighboring redox‐complex moieties, k₂ (cm² mol^?1 s^?1). The strong effect of the electrolyte concentration on both k₁ and k₂ indicates that the counterion motion limits the electron‐hopping rate at lower electrolyte concentrations. Analysis of the dependence of k₁ and k₂ on the potential gave intrinsic kinetic parameters without overpotential effects: k₁⁰=110 s^?1, k₂⁰=2.6×10¹² cm² mol^?1 s^?1 for [n Fe 3 ], and k₁⁰=100 s^?1, k₂⁰=4.1×10¹¹ cm² mol^?1 s^?1 for [n Fe 4 ] (n=number of complexation cycles).     

Reibungsdämpfung durch Scheuerleisten: Ein praxisgerechtes Auslegungskonzept

Übersicht Die Fugen zusammengesetzter Bauteile sind einerseits für eine nachteilige Steifigkeitsminderung verantwortlich, tragen aber andererseits durch Reibungsvorgänge wesentlich zum Dämpfungsvermögen einer Konstruktion bei. Merkliche Reibungsdämpfung ohne gleichzeitigen Steifigkeitsverlust bewirken zusätzliche Fugen, die durch Anbringen sogenannter Scheuerleisten entstehen. Der Autor stellt ein Näherungsverfahren zur dämpfungsoptimalen Auslegung von Scheuerleisten vor. Ausgehend von der zu dämpfenden Schwingungsform liefert dieses Verfahren Kriterien für eine günstige Scheuerleistenanordnung, geeignete Leistenabmessungen und als wichtigstes Ergebnis eine dämpfungsoptimale Fugenpressung, die zu maximaler Energiedissipation führt. Schließlich kann das zu erwartende Dämpfungsmaß berechnet und damit das Ergebnis einer vorgesehenen Dämpfungsmaßnahme abgeschätzt werden.

---

Damping by friction ledges: a practical design concept

Summary On the one hand, mating surfaces of structures are responsible for a reduction of stiffness, on the other hand relative motion produces friction, which contributes considerably to the damping. Noticeable friction damping without simultaneous stiffness reduction can be achieved by adding further mating surfaces. Such interfaces are realized by fastening additional elements (e.g. beamlike) onto the structure. An analytic approximation method for these so-called friction ledges is described in this paper. Initiating from the mode shape to be damped the procedure yields criteria for the suitable positioning and design of the ledges. Most important of all is the damping optimized interface pressure, that leads to maximum energy dissipation. Finally, the expected damping rate can be computed, and therefore the result of the proposed measure assessed.

     

Wirkungsgrade in der Welt des Lebens und der Technik

Zusammenfassung Um der oft gehörten Meinung entgegenzutreten, die energetischen Wirkungsgrade lebender Organismen seien wesentlich höher als die technischer Verfahren, werden entsprechende Werte miteinander verglichen. Der sehr niedrige Wirkungsgrad der Photosynthese zusammen mit der kleinen Energiedichte der Sonnenstrahlung erzwang ab einer kritischen Größe die Aufspaltung in Energiesammler, die Pflanzen, und Verbraucher chemischer Energie, den Tieren. Dank den 10 mal höheren Wirkungsgraden in der Technik, lassen sich Solarmobile bauen, die von der auf sie fallenden Sonnenstrahlung angetrieben werden. Wegen des Multiplikationsgesetzes der Teilwirkungsgrade ergeben sich sowohl für die Speicherung der Sonnenenergie in den fossilen Brennstoffen wie in der Nahrungskette extrem niedrige Wirkungsgrade.

---

Efficiencies in the world of life and in engineering

One often hears the opinion, that the efficiencies in the world of life are higher than in engineering. To disprove this, many values of efficiency of corresponding processes are compared. The very low efficiency of photosynthesis in living plants together with the low density of solar radiation has led the world of life to split into collectors of energy, the plants, and consumers of chemical energy, the animals. Thanks to the ten times higher efficiencies of solar cells, it is possible, to produce solar mobiles, vehicles that move driven by solar radiation.

---

---

Herrn Prof. Dr.-Ing. U. Grigull zum 75. Geburtstag gewidmet     

On the diffusion field in the neighborhood of two identical spheres

Summary Under steady state conditions the reduction in the diffusive flux into a sphere due the presence of a neighboring, identical sphere is calculated. Taking the flux into a sphere as 1 when the particles are at infinite separation, the flux decreases to a minimum value of 0.693 when the spheres are touching.

---

Zusammenfassung Unter stationären Bedingungen wird die Abnahme des Diffusionsflusses in eine Kugel, bedingt durch eine benachbarte identische Kugel, berechnet.Wird der Diffusionsfluß in eine Kugel gleich 1 gesetzt, wenn die Partikel unendlich weit voneinander entfernt sind, so nimmt der Diffusionsfluß auf einen Minimalwert von 0,693 ab, wenn sich die Kugeln berühren.

---

---

With 2 figures     

Umsetzung von hydrobromiertem 1,4-Polybutadien mit lithiumorganischen Verbindungen

Ohne ZusammenfassungMit 1 Abbildung und 1 Tabelle     

Eine semiempirische Gleichung zur Beschreibung des Lösungsmitteleinflusses auf Statik und Kinetik chemischer Reaktionen. Teil I

A model has been developed for calculating the enthalpy, entropy and free energy change associated with the creation of cavities in a liquid the size of which corresponds to the volume occupied by a solvent molecule. The molar enthalpy change H _cav equals the molar enthalpy of vaporization of the liquid, the free energy change G _cav is given by G _cav=–RT ln (V _m ·p _eq /RT) (V _m =molar volume,p _eq =equilibrium vapor pressure) and is related to the standard free energy of vaporization. This relationship provides an estimate of the free energy of cavity formation required to accomodate a substrate in the liquid. It has been shown, that the free energy of solvation of a substrate can be dissected into different contributions accounting for (1) the concentration dependence of partial molar free energy quantities, (2) the formation of holes in the solvent, (3) the existence of specific, short range solute-solvent interactions and (4) the dielectric polarization of the medium. Application of this concept leads to an equation of the general form G ^S –G ^R =a(DN ^S –DN ^R )+b(AN ^S –AN ^R )+c(G _vp ^oS –G _vp ^oR ), where G represents the free energy of reaction or activation,DN the donor number,AN the acceptor number and G _vp ^o the standard free energy of vaporization of a solventS and a reference solventR, resp.

---

---

Mit 3 Abbildungen     

K2[(UO2)As2O7] – the First Uranium Polyarsenate

Yellowish crystals of K₂[(UO₂)As₂O₇] ( 1 ) have been synthesized by solid‐state reactions method. The structure of 1 [orthorhombic, Pmmn, a = 12.601(2), b = 13.242(2), c = 5.621(1) Å, V = 937.9(3) ų, Z = 4] has been solved by direct methods and refined to R₁ = 0.049, wR₂ = 0.1060 for 1059 observed reflections. The structure of 1 is based upon [(UO₂)As₂O₇]^2? sheets formed by corner sharing between [UO₆]^6? distorted octahedra and [As₂O₇]^4? polyarsenate groups. The K⁺ cations are either in eightfold or tenfold coordination and are located between the sheets. The topology of the uranyl arsenate sheet is related to silicate minerals of the melilite group and related synthetic silicate, aluminate and germanate compounds.     

One‐Dimensional,Cofacial Porphyrin Polymers Formed by Self‐Assembly of meso‐Tetrakis(ERE Donor) Zinc(II) Porphyrins

A series of meso‐tetrakis‐(ERE donor) zinc(II) porphyrins n Zn (ERE donor=4‐R‐3,5‐bis[(E)‐methyl]phenyl; 1 Zn: E=NMe₂, R=Br; 2 Zn: E=NMe₂, R=H; 3 Zn: E=OMe, R=Br; 4 Zn: E=OMe, R=H) have been synthesized in excellent yields. As a result of the combination of a Lewis acidic site and eight Lewis basic sites within one molecule, monomeric molecules of n Zn self‐assemble to form one‐dimensional porphyrin polymers [ n Zn]_∞ in the solid state, as confirmed for 1 Zn and 3 Zn by X‐ray crystallography. The coordination environment around the zinc(II) ions in these polymers is octahedral. They are ligated by four equatorial nitrogen atoms of the porphyrin and two apical E atoms (E=N, O) provided by the EBrE donor groups of adjacent n Zn molecules. Complexes 2 Zn and 4 Zn did not form single crystals, but solid‐state UV/Vis analysis points to the formation of similar structures. Solution UV/Vis and ¹H NMR spectroscopy indicated that interactions between 1 Zn and 2 Zn monomers in the polymers are stronger than between 3 Zn and 4 Zn monomers. Interestingly, they also revealed that the presence of a neighboring bromine atom in the EBrE donor groups has a considerable influence on the coordination properties of the benzylic N or O atoms. The zinc(II) ions of the porphyrins most likely adopt only hexacoordination in the solid state, owing to the unique predisposition of Lewis acidic and basic sites in the n Zn molecules. Several parameters of the aggregates, for example, the interplanar separation between porphyrins and the zinc–zinc distances, change as a function of the coordinating E groups. The high degree of modularity in their synthesis makes these zinc(II) porphyrins an interesting new entry in noncovalent multiporphyrin assemblies.     

Mechanisms of ATPases--a multi-disciplinary approach

ATPases are important molecular machines that convert the chemical energies stored in ATP to mechanical actions within the cell. ATPases are among the most abundant proteins with diverse functions involved in almost every cellular pathway. The well characterised ATPases include the various motor proteins responsible for cargo transfers, cell motilities, and muscle contractions; the protein degradation machinery - the proteasome; the ATP synthase, F-ATPase; and the chaperone systems. Other ATPases include DNA helicases and DNA replication complex; proteins responsible for protein/complex disassembly; and certain gene regulators. It is beyond the scope of this review to cover the complete range of ATPases. Instead, we will focus on a few representative ATPases, chosen based on their diverse mechanisms and properties. Furthermore, this review is by no means trying to cover comprehensively the literature for each ATPase nor the historical aspects in each field. We will focus on describing the various techniques being employed to derive the mechanisms and properties of the chosen ATPases. Among them, high and low resolution structural studies combined with biochemical assays seem to be the dominant technical advances adapted to reveal mechanisms for most of the ATPases except the bacterial sigma54 activators, whose mechanism of action is mostly derived from large amount of biochemical studies. A number of them, especially the F-ATPase and motor proteins, have been studied successfully by various single molecule and imaging techniques. We will therefore discuss them in greater details in order to describe the wide range techniques being utilised.     

Untersuchung der Temperaturabhängigkeit derg ik -Tensoren von Polyäthyleneinkristallen

Zusammenfassung Es wurden die Kristallitgröße und die Änderungen der parakristallinen Gitterstörungen aus den Linienbreiten des Röntgenweitwinkeldiagramms von lösungskristallisiertem linearem Polyäthylen bei den Temperaturen 15°K, 73°K, 173°K und Zimmertemperatur bestimmt. Es wurde eine Zunahme der Gitterstörungen mit fallender Temperatur gefunden.

---

Summary The crystallite size and the paracrystalline distortions in polyethylene single crystals were evaluated by the measurement of the linewidth in the X-ray wide angle diagram at four different temperatures (15°K, 73°K, 173°K and 297°K). An increase of the lattice distortions with decreasing temperature was found.

---

---

Mit 3 Abbildungen

---

Vorgetragen auf der Arbeitssitzung des Fachausschusses Physik der Hochpolymeren in der Frühjahrstagung 1970 des Regionalverbandes Hessen-Mittelrhein-Saar der Deutschen Physikalischen Gesellschaft in Darmstadt, 10.–13. März 1970.