Stabilization of a standard gas mixture generator with diffusion tubes

Summary The generator contains diffusion tubes of known length and internal diameter. Once produced, the mixture of the carrier gas and acetone, the reference material, is sent through a chromatographic flame ionisation detector. Its signal reaches a constant level after a time corresponding to the stabilization time of the generator. The technique described is simple and gives repeatable results.     

Collision- and non-collision-induced predissociation in the appearance of S+ and CS+ ions from CS2 under electron impact

Metastable transitions in CS⁺₂ leading to S⁺ + CS and CS⁺ + S under electron impact on CS₂ ae reported. The predissociation processes able to explain the occurrence of these metastable transitions are discussed. An interpretation of some fast dissociation processes is suggested.     

Interfacial tension and fluorine evolution on a carbon anode

During electrolysis of molten KF-2HF, strongly adherent fluorine bubbles are generated at the surface of carbon anode. The current was passing even if the horizontal anode was fully covered with gas film. The formation and growth of gas bubbles were studied by transient electrochemical techniques. It was observed that the fluorine bubbles do not have the spherical cap shape predicted by the classical theory. The curvature radius of the interface profile is not constant, the edge of the bubble being flat with a contact angle close to zero. The results are interpreted in the frame of a model which takes into account the predominant role of the interfacial properties.     

Role of elemental fluorine in nuclear field

The preparation of fluorine gas by Henri Moissan by electrolysis of molten fluorides can be considered as one of the most important discoveries during the last centuries. Indeed, in addition to its use in many industrial fields (microelectronic, surface cleaning, pharmacology, medicine, …), fluorine gas is strongly involved in nuclear field for the preparation of UF₆. The latter allows the natural uranium enrichment via the gaseous diffusion process. Due to the increase of the energy demand in industrialised and emergent countries, the production of UF₆ and consequently of F₂ should increase drastically during the next decades. The aim of this paper is to summarise the evolution of the process to produce fluorine from its discovery to the present process. Few aspects on the researches done for a better understanding of the fluorine evolution reaction are presented. The use of fluorine in the nuclear field is also discussed.     

In vivo application of intestinal pH measurement using 2',7'-bis(carboxyethyl)-5,6-carboxyfluorescein (BCECF) fluorescence imaging

Measurement of gastrointestinal intramucosal pH (pHim) has been recognized as an important factor in the detection of hypoxia-induced dysfunctions. However, current pH measurement techniques are limited in terms of time and spatial resolutions. A major advance in accurate pH measurement was the development of the ratiometric fluorescent indicator dye, 2',7'-bis(carboxyethyl)-5,6-carboxyfluorescein (BCECF). This study aimed to set up and validate a fluorescence imaging technique to measure in vivo the intramucosal pH (pHim) of the intestine. The intestine was inserted into an optical chamber placed under a microscope. Animals were injected intravenously with the pH-sensitive fluorescent dye BCECF. Fluorescence was visualized by illuminating the intestine alternately at 490 and 470 nm. The emitted fluorescence was directed to an intensified camera. The ratio of emitted fluorescence at excitation wavelengths of 490 and 470 nm was measured, corrected and converted to pHim by constructing a calibration curve. The pHim controls were performed with a pH microelectrode and were correlated with venous blood gas sampling. Results show that pHim is determined with an accuracy of +/- 0.07 pH units and a response time of 1 min. In conclusion pHim mapping of rat intestine can be obtained by fluorescence imaging using BCECF. This technology could be easily adapted for endoscopic pH measurements.     

Improvement of the spinning electrophorometer for zeta potential measurements

In this study, bubbles are held by centripetal force at the center of a rotating cylinder filled with an aqueous solution. Their velocities along the axe of rotation, after application of an electrophoretic force, are used for the calculation of the so-called electrokinetic potential. But this process necessitates the elimination of the electro-osmosis which occurs on the interior sides of the glass cylinder by superposing a concurrent force on the bubble. Efficiency of DEAE-Dextran reticulated with 1,4 Butanediol Diglycidyl Ether can be tested by the observation of a cloud of latex microspheres injected in the interior of the tube and allowed to move in respect with the application of an electric field. The experimental control of these velocity profiles proves the adequacy of the polymer for many cases such as surfactant solutions, presence of electrolytes, utilization with moderate pH.The dynamic interpretation of the electrophoretic motion of bubbles is possible by considering that small ones behave like rigid spheres moving in a rotating fluid. In the second part of this paper and in a previous publication, we have experimentally proved that the use of the theoretical expressions of the forces involved for rigid spheres is justified for small bubbles. So, the electrokinetic potential can be expressed versus the velocity, leading to possible interpretations of the adsorption on gas-water interfaces.     

Preparation of Re(I)- and (99m)Tc(I)-metallocarboranes in water under weakly basic reaction conditions

A new method for the preparation of Re- and (99m)Tc-metallocarboranes in water under mild reaction conditions was developed. Three nido-carborane ligands were reacted with [Re(CO)(3)Br(3)](2)(-) in the presence of aqueous potassium fluoride to give the corresponding eta(5)-Re(CO)(3)-carborane complexes. The use of KF as a base afforded the desired Re-metallocarboranes in good yields while avoiding the formation of Re clusters, which are byproducts commonly observed when reactions are carried out in the presence of strong aqueous bases. The reaction was also performed at the tracer level producing the first (99m)Tc-carborane complex, which was isolated in 80% radiochemical yield following a simple Sep-Pak purification process. The resulting organometallic complex was stable to cysteine and histidine challenges for more than 24 h.     

Hydrazide-catalyzed 1,3-dipolar nitrone cycloadditions

The triflate salts of cyclic hydrazides function as asymmetric catalysts for the [3+2]cycloadditions of nitrones with α,β-unsaturated aldehydes. The camphor-derived hydrazides show a preference for the exo isomers during these reactions, providing a compliment to other organically catalyzed dipolar cycloadditions. Enantiomeric excesses as high as 93% were realized for the exo isomers, while some endo products were obtained in 94% ee.     

Very general formation of tetrahydropterin cation radicals during reaction of iron porphyrins with tetrahydropterins: model for the corresponding NO-synthase reaction

Electron transfer from tetrahydropterins to iron porphyrins, with formation of intermediate tetrahydropterin cation radicals, is a very general reaction that was shown to occur not only with tetrahydrobiopterin, as originally found in NO-synthases, but also with another important biological cofactor, tetrahydrofolate, and various iron porphyrins, either in their ferric state, or in the Fe(II)O(2) state, as in the first model of the corresponding NO-synthase reaction described in this paper.