Polyphenols from Dichrostachys cinerea Fruits Anti-Inflammatory,Analgesic, and Antioxidant Capacity in Freund’s Adjuvant-Induced Arthritic Rat Model

Dichrostachys cinerea (L.) Wigth & Arn. (DC) is widely used in traditional medicine against several inflammatory diseases, especially rheumatoid arthritis, because of its antioxidant and anti-inflammatory effects. This study aimed to characterize the polyphenol-rich DC fruit extracts and investigate the analgesic, anti-inflammatory, and antioxidant effects in a rat inflammation model induced by complete Freund’s adjuvant (CFA). Water and ethanolic extracts were characterized using liquid chromatography coupled with mass spectrometry (LC-MS), Fourier-transform infrared (FTIR) spectroscopy, and gas chromatography coupled with mass spectrometry (GC-MS). The polyphenol-rich extracts were administered in three different concentrations for 30 days. Pain threshold, thermal hyperalgesia, edema, and serum biomarkers specific to inflammatory processes or oxidative stress were evaluated. Both extracts were rich in polyphenolic compounds, mainly flavan-3-ols, proanthocyanidins, and flavone glycosides, which had important in vitro antioxidant capacity. DC fruit extracts administration had the maximum antinociceptive and anti-inflammatory effects after one day since the CFA injection and showed promising results for long-term use as well. The measurement of pro-inflammatory cytokines, cortisol, and oxidative stress parameters showed that DC extracts significantly reduced these parameters, being dose and extract-type dependent. These results showed potential anti-inflammatory, analgesic, and antioxidative properties and revealed the necessity of using a standardized polyphenolic DC extract to avoid result variability.     

A microfluidic device based on droplet storage for screening solubility diagrams

This work describes a new microfluidic device developed for the rapid screening of solubility diagrams. In several parallel channels, hundreds of nanolitre volume droplets of a given solution are first stored with a gradual variation in the solute concentration. Then, the application of a temperature gradient along these channels enables us to read directly and quantitatively phase diagrams, concentration vs. temperature. We show, using a solution of adipic acid, that we can measure ten points of the solubility curve in less than 1 hr and with only 250 microL of solution.     

Synthesis of tricyclic nitrogen heterocycles by a sequence of palladium-catalyzed N-H and C(sp3)-H arylations

A range of tricyclic nitrogen heterocycles were synthesized in a straightforward and efficient manner via a sequence involving palladium-catalyzed N-arylation and C(sp(3))-H arylation as the key steps. Whereas the C(sp(3))-H arylation furnished fused 6,5,6-membered ring systems efficiently, the formation of the more strained 6,5,5-membered systems proved to be more challenging and required a subtle adjustment of the reaction conditions.     

Hole tunneling and hopping in a Ru(bpy)3(2+)-phenothiazine dyad with a bridge derived from oligo-p-phenylene

A molecular dyad was synthesized in which a Ru(bpy)(3)(2+) (bpy = 2,2'-bipyridine) photosensitizer and a phenothiazine redox partner are bridged by a sequence of tetramethoxybenzene, p-dimethoxybenzene, and p-xylene units. Hole transfer from the oxidized metal complex to the phenothiazine was triggered using a flash-quench technique and investigated by transient absorption spectroscopy. Optical spectroscopic and electrochemical experiments performed on a suitable reference molecule in addition to the above-mentioned dyad lead to the conclusion that hole transfer from Ru(bpy)(3)(3+) to phenothiazine proceeds through a sequence of hopping and tunneling steps: Initial hole hopping from Ru(bpy)(3)(3+) to the easily oxidizable tetramethoxybenzene unit is followed by tunneling through the barrier imposed by the p-dimethoxybenzene and p-xylene spacers. The overall charge transfer proceeds with a time constant of 41 ns, which compares favorably to a time constant of 1835 ns associated with equidistant hole tunneling between the same donor-acceptor couple bridged by three identical p-xylene units. The combined hopping/tunneling sequence thus leads to an acceleration of hole transfer by roughly a factor of 50 when compared to a pure tunneling mechanism.     

A Structural View on Medicinal Chemistry Strategies against Drug Resistance

The natural phenomenon of drug resistance is a widespread issue that hampers the performance of drugs in many major clinical indications. Antibacterial and antifungal drugs are affected, as well as compounds for the treatment of cancer, viral infections, or parasitic diseases. Despite the very diverse set of biological targets and organisms involved in the development of drug resistance, the underlying molecular mechanisms have been identified to understand the emergence of resistance and to overcome this detrimental process. Detailed structural information on the root causes for drug resistance is nowadays frequently available, so next‐generation drugs can be designed that are anticipated to suffer less from resistance. This knowledge‐based approach is essential for fighting the inevitable occurrence of drug resistance.     

Stable and soluble oligo(3,4-ethylenedioxythiophene)s end-capped with alkyl chains

The synthesis of a new series of stable and soluble EDOT oligomers end-capped with n-hexyl groups is described. Optical and electrochemical results indicate that the synergy between the direct electron-releasing effects of the ethylenedioxy groups and the self-rigidification resulting from intramolecular interactions controls to a large extent the HOMO-LUMO gap.     

Elimination of Listeria inoculated in ready-to-eat carrots by combination of antimicrobial coating and γ-irradiation

A combined treatment of an edible coating composed of trans-cinnamaldehyde (TCN; 0.5% p/p) with γ-irradiation was investigated against Listeria inoculated in peeled mini-carrots. First, the D₁₀ value (γ-irradiation dose required to eliminate 90% of the bacterial population) of TCN was evaluated under air. This treatment resulted in a 3.66-fold increase in relative bacterial radiosensitivity (RBR) as compared to the control without antimicrobial coating. Secondly, the shelf life of mini-carrots during 21 day of storage at 4 °C was studied. Antimicrobial coating containing TCN was assayed in combination with two irradiation doses (0.25 and 0.5 kGy). Results suggested that the inactive coating did not have any antimicrobial effect against Listeria while the coating containing TCN resulted in a 1.29 log reduction in carrots packed under air after 21 days of storage. Hence, these observations indicated that the combination of irradiation with antimicrobial coating played an important role in enhancing the radiosensitization of Listeria to γ-irradiation.     

Electrochemical reduction of oxygen catalyzed by a wide range of bacteria including Gram-positive

Most bacteria known to be electrochemically active have been harvested in the anodic compartments of microbial fuel cells (MFCs) and are able to use electrodes as electron acceptors. The reverse phenomenon, i.e. using solid electrodes as electron donors, is not so widely studied. To our knowledge, most of the electrochemically active bacteria are Gram-negative. The present study implements a transitory electrochemical technique (cyclic voltammetry) to study the microbial catalysis of the electrochemical reduction of oxygen. It is demonstrated that a wide range of aerobic and facultative anaerobic bacteria are able to catalyze oxygen reduction. Among these electroactive bacteria, several were Gram-positive. The transfer of electrons was direct since no activity was obtained with the filtrate. These findings, showing a widespread property among bacteria including Gram-positive ones, open new and interesting routes in the field of electroactive bacteria research.     

Lanthanide-mediated tuning of electronic and magnetic properties in heterotrimetallic cyclooctatetraenyl multidecker self-assemblies

The synthesis of a novel family of homoleptic COT-based heterotrimetallic self-assemblies bearing the formula [LnKCa(COT)₃(THF)₃] (Ln(iii) = Gd, Tb, Dy, Ho, Er, Tm, and Yb) is reported followed by their X-ray crystallographic and magnetic characterization. All crystals conform to the monoclinic P2₁/c space group with a slight compression of the unit cell from 3396.4(2) ų to 3373.2(4) ų along the series. All complexes exhibit a triple-decker structure having the Ln(iii) and K(i) ions sandwiched by three COT²⁻ ligands with an end-bound {Ca²⁺(THF)₃} moiety to form a non-linear (153.5°) arrangement of three different metals. The COT²⁻ ligands act in a η⁸-mode with respect to all metal centers. A detailed structural comparison of this unique set of heterotrimetallic complexes has revealed consistent trends along the series. From Gd to Yb, the Ln to ring-centroid distance decreases from 1.961(3) Å to 1.827(2) Å. In contrast, the separation of K(i) and Ca(ii) ions from the COT-centroid (2.443(3) and 1.914(3) Å, respectively) is not affected by the change of Ln(iii) ions. The magnetic property investigation of the [LnKCa(COT)₃(THF)₃] series (Ln(iii) = Gd, Tb, Dy, Ho, Er, and Tm) reveals that the Dy, Er, and Tm complexes display slow relaxation of their magnetization, in other words, single-molecule magnet (SMM) properties. This behaviour is dominated by thermally activated (Orbach-like) and quantum tunneling processes for [DyKCa(COT)₃(THF)₃] in contrast to [ErKCa(COT)₃(THF)₃], in which the thermally activated and Raman processes appear to be relevant. Details of the electronic structures and magnetic properties of these complexes are further clarified with the help of DFT and ab initio theoretical calculations.

A new class of heterotrimetallic COT-based self-assemblies accommodates metals from groups I–III in three different oxidation states and enables tuning of electronic and magnetic properties.