A microfluidic device based on droplet storage for screening solubility diagrams

This work describes a new microfluidic device developed for the rapid screening of solubility diagrams. In several parallel channels, hundreds of nanolitre volume droplets of a given solution are first stored with a gradual variation in the solute concentration. Then, the application of a temperature gradient along these channels enables us to read directly and quantitatively phase diagrams, concentration vs. temperature. We show, using a solution of adipic acid, that we can measure ten points of the solubility curve in less than 1 hr and with only 250 microL of solution.     

Synthesis of tricyclic nitrogen heterocycles by a sequence of palladium-catalyzed N-H and C(sp3)-H arylations

A range of tricyclic nitrogen heterocycles were synthesized in a straightforward and efficient manner via a sequence involving palladium-catalyzed N-arylation and C(sp(3))-H arylation as the key steps. Whereas the C(sp(3))-H arylation furnished fused 6,5,6-membered ring systems efficiently, the formation of the more strained 6,5,5-membered systems proved to be more challenging and required a subtle adjustment of the reaction conditions.     

Hole tunneling and hopping in a Ru(bpy)3(2+)-phenothiazine dyad with a bridge derived from oligo-p-phenylene

A molecular dyad was synthesized in which a Ru(bpy)(3)(2+) (bpy = 2,2'-bipyridine) photosensitizer and a phenothiazine redox partner are bridged by a sequence of tetramethoxybenzene, p-dimethoxybenzene, and p-xylene units. Hole transfer from the oxidized metal complex to the phenothiazine was triggered using a flash-quench technique and investigated by transient absorption spectroscopy. Optical spectroscopic and electrochemical experiments performed on a suitable reference molecule in addition to the above-mentioned dyad lead to the conclusion that hole transfer from Ru(bpy)(3)(3+) to phenothiazine proceeds through a sequence of hopping and tunneling steps: Initial hole hopping from Ru(bpy)(3)(3+) to the easily oxidizable tetramethoxybenzene unit is followed by tunneling through the barrier imposed by the p-dimethoxybenzene and p-xylene spacers. The overall charge transfer proceeds with a time constant of 41 ns, which compares favorably to a time constant of 1835 ns associated with equidistant hole tunneling between the same donor-acceptor couple bridged by three identical p-xylene units. The combined hopping/tunneling sequence thus leads to an acceleration of hole transfer by roughly a factor of 50 when compared to a pure tunneling mechanism.     

A Structural View on Medicinal Chemistry Strategies against Drug Resistance

The natural phenomenon of drug resistance is a widespread issue that hampers the performance of drugs in many major clinical indications. Antibacterial and antifungal drugs are affected, as well as compounds for the treatment of cancer, viral infections, or parasitic diseases. Despite the very diverse set of biological targets and organisms involved in the development of drug resistance, the underlying molecular mechanisms have been identified to understand the emergence of resistance and to overcome this detrimental process. Detailed structural information on the root causes for drug resistance is nowadays frequently available, so next‐generation drugs can be designed that are anticipated to suffer less from resistance. This knowledge‐based approach is essential for fighting the inevitable occurrence of drug resistance.     

Stable and soluble oligo(3,4-ethylenedioxythiophene)s end-capped with alkyl chains

The synthesis of a new series of stable and soluble EDOT oligomers end-capped with n-hexyl groups is described. Optical and electrochemical results indicate that the synergy between the direct electron-releasing effects of the ethylenedioxy groups and the self-rigidification resulting from intramolecular interactions controls to a large extent the HOMO-LUMO gap.     

Elimination of Listeria inoculated in ready-to-eat carrots by combination of antimicrobial coating and γ-irradiation

A combined treatment of an edible coating composed of trans-cinnamaldehyde (TCN; 0.5% p/p) with γ-irradiation was investigated against Listeria inoculated in peeled mini-carrots. First, the D₁₀ value (γ-irradiation dose required to eliminate 90% of the bacterial population) of TCN was evaluated under air. This treatment resulted in a 3.66-fold increase in relative bacterial radiosensitivity (RBR) as compared to the control without antimicrobial coating. Secondly, the shelf life of mini-carrots during 21 day of storage at 4 °C was studied. Antimicrobial coating containing TCN was assayed in combination with two irradiation doses (0.25 and 0.5 kGy). Results suggested that the inactive coating did not have any antimicrobial effect against Listeria while the coating containing TCN resulted in a 1.29 log reduction in carrots packed under air after 21 days of storage. Hence, these observations indicated that the combination of irradiation with antimicrobial coating played an important role in enhancing the radiosensitization of Listeria to γ-irradiation.     

A Redox‐Active Bridging Ligand to Promote Spin Delocalization,High‐Spin Complexes,and Magnetic Multi‐Switchability

A dinuclear Co^II complex, [Co₂(tphz)(tpy)₂]ⁿ⁺ (n=4, 3 or 2; tphz: tetrapyridophenazine; tpy: terpyridine), has been assembled using the redox‐active and strongly complexing tphz bridging ligand. The magnetic properties of this complex can be tuned from spin‐crossover with T_1/2≈470 K for the pristine compound (n=4) to single‐molecule magnet with an S_T=5/2 spin ground state when once reduced (n=3) to finally a diamagnetic species when twice reduced (n=2). The two successive and reversible reductions are concomitant with an increase of the spin delocalization within the complex, promoting remarkably large magnetic exchange couplings and high‐spin species even at room temperature.     

Single stage purification of flax,hemp, and milkweed stem and their physical and morphological properties

Agriculture biomass is an alternative possible solution for the extraction of cellulose, compared to the classical soft and hard wood. However, the valorization of cellulose is challenging for the researchers as it involves multiple steps. In the present study, the raw fibers of flax, hemp, and milkweed stem fibers were purified in single step using hydrogen peroxide in water. By this method authors successfully extracted the purified cellulose fibers without damaging the fiber length. The purified fibers were characterized to understand the thermal, functional, crystalline, and morphological properties by thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The FTIR results showed the effective removal of lignin and significant improvement in thermal stability was observed by TGA. Evidently, the SEM results showed significant improvement in the morphology compared to that of the raw fibers. XRD results showed that the treatment does not affect the crystallinity of the fibers.     

Methode calorimetrique de mesure des enthalpies de formation des alliages liquides a forte tension de vapeur

The heat effects corresponding to the dissolution of solid PbSe in liquid Pb-Se alloys starting from pure Pb were measured with a direct reaction calorimeter. The partial enthalpy of formation of PbSe in the melt and the integral enthalpy of formation of the Pb-PbSe system in the liquid state referred the liquid Pb and PbSe were deduced. Then, from a very simple change of reference state, and in the knowledge of the enthalpy of PbSe, the integral enthalpy of formation of Pb-Se liquid alloys with reference to pure liquid components could be derived. The results agreed very well with those obtained previously on the dissolution of Se in Pb. The method used can be applied whenever the component to be added to the bath has a high vapor pressure.

---

Zusammenfassung Die bei der Überführung von festem PbSe in flüssige Pb-Se-Legierungen auftretenden Wärmeeffekte wurden mittels direkter Reaktionskalorimetrie bestimmt. Die auf flüssiges Pb und PbSe bezogene partielle Bildungsenthalpie des Pb-PbSe-Systems im flüssigen Zustand wurde ermittelt. Durch eine geringfügige Veränderung des Referenzzustandes konnte bei Kenntnis der Enthalpie von PbSe die integrale Bildungsenthalpie von flüssigen Pb-Se-Legierungen in Bezug auf die reinen Komponenten abgeleitet werden. Die Ergebnisse stimmen gut mit denen überein, die früher für die Auflösung von Se in Pb erhalten wurden. Die Methode ist anwendbar, wenn dem Bade zuzugebende Komponenten einen hohen Dampfdruck haben.

---

Pb-Se Pb-Se, . Pb-Se Pb-PbSe Pb Pb-Se. PbSe, Pb-Se . , . , .