Lanthanide Complexes with Multidentate Oxime Ligands as Single‐Molecule Magnets and Atmospheric Carbon Dioxide Fixation Systems

The synthesis, structure, and magnetic properties of five lanthanide complexes with multidentate oxime ligands are described. Complexes 1 and 2 ( 1 : [La₂(pop)₂(acac)₄(CH₃OH)], 2 : [Dy₂(pop)(acac)₅]) are synthesized from the 2‐hydroxyimino‐N‐[1‐(2‐pyridyl)ethylidene]propanohydrazone (Hpop) ligand, while 3 , 4 , and 5 ( 3 : [Dy₂(naphthsaoH)₂(acac)₄H(OH)]?0.85 CH₃CN?1.58 H₂O; 4 : [Tb₂(naphthsaoH)₂(acac)₄H(OH)]?0.52 CH₃CN?1.71 H₂O; 5 : [La₆(CO₃)₂(naphthsao)₅ (naphthsaoH)_0.5(acac)₈(CO₃)_0.5(CH₃OH)_2.76H_5.5(H₂O)_1.24]?2.39 CH₃CN?0.12 H₂O) contain 1‐(1‐hydroxynaphthalen‐2‐yl)‐ethanone oxime (naphthsaoH₂). In 1 – 4 , dinuclear [Ln₂] complexes crystallize, whereas hexanuclear La^III complex 5 is formed after fixation of atmospheric carbon dioxide. Dy^III‐based complexes 2 and 3 display single‐molecule‐magnet properties with energy barriers of 27 and 98 K, respectively. The presence of a broad and unsymmetrical relaxation mode observed in the ac susceptibility data for 3 suggest two different dynamics of the magnetization which might be a consequence of independent relaxation processes of the two different Dy³⁺ ions.     

BODIPY: A Highly Versatile Platform for the Design of Bimodal Imaging Probes

In molecular imaging, multimodal imaging agents can provide complementary information, for improving the accuracy of disease diagnosis or enhancing patient management. In particular, optical/nuclear imaging may find important preclinical and clinical applications. To simplify the preparation of dual‐labeled imaging agents, we prepared versatile monomolecular multimodal imaging probe (MOMIP) platforms containing both a fluorescent dye (BODIPY) and a metal chelator (polyazamacrocycle). One of the MOMIP was conjugated to a cyclopeptide (i.e., octreotide) and radiolabeled with ¹¹¹In. In vitro and in vivo studies of the resulting bioconjugate were conducted, highlighting the potential of these BODIPY‐based bimodal probes. This work also confirmed that the biovector and/or the bimodal probes must be chosen carefully, due to the impact of the MOMIP on the overall properties of the resulting imaging agent.     

A Bistable Microelectromechanical System Actuated by Spin-Crossover Molecules

We report on a bistable MEMS device actuated by spin-crossover molecules. The device consists of a freestanding silicon microcantilever with an integrated piezoresistive detection system, which was coated with a 140 nm thick film of the [Fe(HB(tz)₃)₂] (tz=1,2,4-triazol-1-yl) molecular spin-crossover complex. Switching from the low-spin to the high-spin state of the ferrous ions at 338 K led to a reversible upward bending of the cantilever in agreement with the change in the lattice parameters of the complex. The strong mechanical coupling was also evidenced by the decrease of approximately 66 Hz in the resonance frequency in the high-spin state as well as by the drop in the quality factor around the spin transition.     

Improving simulated annealing through derandomization

We propose and study a version of simulated annealing (SA) on continuous state spaces based on \((t,s)_R\)-sequences. The parameter \(R\in \bar{\mathbb {N}}\) regulates the degree of randomness of the input sequence, with the case \(R=0\) corresponding to IID uniform random numbers and the limiting case \(R=\infty \) to (t, s)-sequences. Our main result, obtained for rectangular domains, shows that the resulting optimization method, which we refer to as QMC-SA, converges almost surely to the global optimum of the objective function \(\varphi \) for any \(R\in \mathbb {N}\). When \(\varphi \) is univariate, we are in addition able to show that the completely deterministic version of QMC-SA is convergent. A key property of these results is that they do not require objective-dependent conditions on the cooling schedule. As a corollary of our theoretical analysis, we provide a new almost sure convergence result for SA which shares this property under minimal assumptions on \(\varphi \). We further explain how our results in fact apply to a broader class of optimization methods including for example threshold accepting, for which to our knowledge no convergence results currently exist. We finally illustrate the superiority of QMC-SA over SA algorithms in a numerical study.     

Water-in-oil emulsions stabilized by water-dispersible poly(N-isopropylacrylamide) microgels: understanding anti-Finkle behavior

Emulsions were prepared using poly(N-isopropylacrylamide) microgels as thermoresponsive stabilizers. The latter are well-known for their sensitivity to temperature: they are swollen by water below the so-called volume phase transition temperature (VPTT = 33 °C) and shrink when heated above it. Most of the studies reported in the literature reveal that the corresponding emulsions are of the oil-in-water type (O/W) and undergo fast destabilization upon warming above the VPTT. In the present study, whereas O/W emulsions were obtained with a wide panel of oils of variable polarity and were all thermoresponsive, water-in-oil (W/O) emulsions were found only in the presence of fatty alcohols and did not exhibit any thermal sensitivity. To understand the peculiar behavior of emulsions based on fatty alcohols, we investigated the organization of microgels at the oil-water interface and we studied the interactions of pNIPAM microgels with octanol. By combining several microscopy methods and by exploiting the limited coalescence process, we provided evidence that W/O emulsions are stabilized by multilayers of nondeformed microgels located inside the aqueous drops. Such behavior is in contradiction with the empirical Finkle rule stating that the continuous phase of the preferred emulsion is the one in which the stabilizer is preferentially dispersed. The study of microgels in nonemulsified binary water/octanol systems revealed that octanol diffused through the aqueous phase and was incorporated in the microgels. Thus, W/O emulsions were stabilized by microgels whose properties were substantially different from the native ones. In particular, after octanol uptake, they were no longer thermoresponsive, which explained the loss of responsiveness of the corresponding W/O emulsions. Finally, we showed that the incorporation of octanol modified the interfacial properties of the microgels: the higher the octanol uptake before emulsification, the lower the amount of particles in direct contact with the interface. The multilayer arrangement was thus necessary to ensure efficient stabilization against coalescence, as it increased interface cohesiveness. We discussed the origin of this counterexample of the Finkle's rule.     

Nanocomposite Carbon‐PDMS Material for Chip‐Based Electrochemical Detection

This paper presents an alternative approach to create low‐cost and patternable carbon electrodes suitable for microfluidic devices. The fabrication and the electrochemical performances of electrodes made of Polydimethylsiloxane doped with commercially available carbon black (C‐PDMS) are described. Conductivity and electrochemical measurements performed on various carbon to PDMS ratios showed that electrodes with suitable electrochemical properties were obtained with a ratio of 25 %.     

Purification and structure elucidation of three naturally bioactive molecules from the new terrestrial Streptomyces sp. TN17 strain

Thirty litres of fermentation broth was extracted from the newly isolated Streptomyces sp. strain TN17 and various separation and purification steps led to the isolation of three pure bioactive compounds (1-3). Compound 1: cyclo (L-Leu-L-Arg), a diketopiperazine 'DKP' derivative; 2: di-(2-ethylhexyl) phthalate, a phthalate derivative; and 3: cyclo 1-[2-(cyclopentanecarbonyl-3-phenyl-propionyl]-pyrrolidine-2-carboxylic acid (1-carbamoyl-propyl)-amide, a cyclic tetrapeptide derivative. The chemical structure of these three active compounds was established on the basis of spectroscopic studies (MS and NMR) and by comparison with data from the literature. According to our biological studies, the pure compounds (1-3) possess antibacterial and antifungal activities.     

Hole tunneling and hopping in a Ru(bpy)3(2+)-phenothiazine dyad with a bridge derived from oligo-p-phenylene

A molecular dyad was synthesized in which a Ru(bpy)(3)(2+) (bpy = 2,2'-bipyridine) photosensitizer and a phenothiazine redox partner are bridged by a sequence of tetramethoxybenzene, p-dimethoxybenzene, and p-xylene units. Hole transfer from the oxidized metal complex to the phenothiazine was triggered using a flash-quench technique and investigated by transient absorption spectroscopy. Optical spectroscopic and electrochemical experiments performed on a suitable reference molecule in addition to the above-mentioned dyad lead to the conclusion that hole transfer from Ru(bpy)(3)(3+) to phenothiazine proceeds through a sequence of hopping and tunneling steps: Initial hole hopping from Ru(bpy)(3)(3+) to the easily oxidizable tetramethoxybenzene unit is followed by tunneling through the barrier imposed by the p-dimethoxybenzene and p-xylene spacers. The overall charge transfer proceeds with a time constant of 41 ns, which compares favorably to a time constant of 1835 ns associated with equidistant hole tunneling between the same donor-acceptor couple bridged by three identical p-xylene units. The combined hopping/tunneling sequence thus leads to an acceleration of hole transfer by roughly a factor of 50 when compared to a pure tunneling mechanism.     

First identification of dimethoxycinnamic acids in human plasma after coffee intake by liquid chromatography-mass spectrometry

There is a substantial amount of published literature on the bioavailability of various coffee components including the most abundant metabolites, caffeic and ferulic acids. Surprisingly, to date, the appearance of dimethoxycinnamic acid derivatives in humans has not been reported despite the fact that methylated form of catechol-type polyphenols could help maintain, modify or even improve their biological activities. This study reports an LC-MS method for the detection of dimethoxycinnamic acid in human plasma after treatment with an esterase. Liquid chromatography, including the combination of methanol and acetonitrile as organic eluent, was optimized to resolve all interferences and enable reliable detection and identification of 3,4-dimethoxycinnamic and 3,4-dimethoxy-dihydrocinnamic acids. In addition to the good mass accuracy achieved (better than 5 ppm), tandem mass spectrometric and co-chromatography experiments further confirmed the identity of the compounds. The optimized method was applied to analyze samples obtained immediately, 1 and 10 h after coffee ingestion. The results show that in particular 3,4-dimethoxycinnamic acid appears in high abundance (～380 nM at 60 min) in plasma upon coffee intake, indicating that it is important to consider these derivatives in future bioavailability and bioefficacy studies.     

Structure resolution of Ba5Al3F19 and investigation of fluorine ion dynamics by synchrotron powder diffraction, variable-temperature solid-state NMR, and quantum computations

The room temperature structure of Ba(5)Al(3)F(19) has been solved using electron microscopy and synchrotron powder diffraction data. One-dimensional (1D) (27)Al and ultrafast magic-angle-spinning (MAS) (19)F NMR spectra have been recorded and are in agreement with the proposed structural model for Ba(5)Al(3)F(19). The (19)F isotropic chemical shift and (27)Al quadrupolar parameters have been calculated using the CASTEP code from the experimental and density functional theory geometry-optimized structures. After optimization, the calculated NMR parameters of both the (19)F and (27)Al nuclei show improved consistency with the experimental values, demonstrating that the geometry optimization step is necessary to obtain more accurate and reliable structural data. This also enables a complete and unambiguous assignment of the (19)F MAS NMR spectrum of Ba(5)Al(3)F(19). Variable-temperature 1D MAS (19)F NMR experiments have been carried out, showing the occurrence of fluorine ion mobility. Complementary insights were obtained from both two-dimensional (2D) exchange and 2D double-quantum dipolar recoupling NMR experiments, and a detailed analysis of the anionic motion in Ba(5)Al(3)F(19) is proposed, including the distinction between reorientational processes and chemical exchange involving bond breaking and re-formation.